How to set the parameters of the AKD with LABVIEW driver?
Hello
I am looking for a simple example to set or read the AKD with Labview driver settings.
The AKD has ethernet communication and control is analog - AKD-P00306-NBAN-0000
I want to use Labview to read the paramerters even as Kollmorgen WorkBench
Thanks for your help
Thank your for your help
I found a solution with the TELNET Protocol
Tags: NI Hardware
Similar Questions
-
OAM11g - how to set the policy with the request for protected by URL
I am trying to perform a configuration of the strategy to protect the following URL on OAM 11 g (11.1.1.5). (The Webgate is 10g, such that it runs on Apache)
https://online.myCustomer.co.UK/dispatch/Portal/AppManager/myCustomer/WRP?_nfpb=true & _pageLabel = Page_AccReg_LoginService & pageid = MV_0000
Given that the '? ' will not be allowed, can anyone suggest how I could build a resource definition to use in the policy?
Following the guidance in Chapter 9 of the guide admin OAM (11.1.x) I thought that...
/Dispatch/.../*PageID=MV_0000 in the resource URL field might do the trick.
But I do not receive "format of the URL of the resource is not valid. I tried a number of other combinations - less - and were not surprised to see that they are not acceptable either.
Anyone got any better suggestions?
And having an old webgate out would cause problems I should know about?
See you soon
Jon.Jon,
11.1.1.5, you can write policy based on query parameters.
http://download.Oracle.com/docs/CD/E21764_01/doc.1111/e15478/app_domn.htm#AIAAG541
When you set the OAM resource in your case, set the query string parameter:
* pageID = MV_0000
The 'hook' or '?' should appear in the resource when defined in the authentication as policy:
HostID:/dispatch/.../*?**pageID=MV_0000
You should be able to set your granularity of policy on query string values.
-
How to set the alias with Essbase Studio?
I read through P113-P118 "Oracle Essbase Studio user's Guide" on how to implement aliases. It seems easy t create the Alias defined according to the document.
I want to put 100-10 aliases as "Cola", the information comes from the RDBMS to confirm. The product in RLDB a field SKU and SKU_Alias columns table, the Reference value is: 100-10 100 - 20, etc.
My link is:
Source: SKU
link: TBC::TBC. Product.SKU_ALIAS
It's using the grammar to page 115
connection:
------' < logical_source_name': ' < physical_data_source_name >. < physical_tabl
e_name > '. ' < physical_column_name > '
But after that I deployed the cube, I do not see the product as expected from EAS alias name? I tried 100 times, but can't find what's wrong with me. Please advise, thank you!
My question: how to put the elements in place or associate the alias set produces Essbase Studio so that I see of EAS? Thank you! Bob
Published by: user2571802 on January 10, 2010 21:38First of all, it can be useful convert IST TBC in the Studio model, for this you will need to configure EIS and create the example application to confirm.
Once it has been created in Studio, you can go to tools > migration catalogue IST and migrate the TBC of IST at the Studio application.
If you use this method, all the aliases etc will be already set up to see how it's done.To set up the alias, you would go to
Tools > "Alias set Manager" > create a new alias say "Default" and add a link, for example PRODUCTDIM. SKU to PRODUCTDIM. SKUALIASThen on your right click "Properties Essbase" model > Alias tab > select the default alias table and move the window selected tables.
This should then assigned the default table, if you check the properties to say PRODUCTDIM. SKU in the default alias tab and the mapping must be indicated.See you soon
John
http://John-Goodwin.blogspot.com/ -
How to set the password for HARD drive?
Hello
Could someone help me please by setting the password for TOSHIBA STOR. E ART 3 (1 TB 2.5 ") HARD DRIVE?
Hello
I n t have this external HARD disk, but Toshiba pre-installed some additional software on this subject for the creation of HARD drive password?
-
Hello
Oracle Database 10 g Express Edition Release 10.2.0.1.0 - product
Release of centOS 4.8 (Final)
VMWARE vsphere client
I have a question about NTP. I recently discovered that I forgot to install and configure ntp on my server. The time is now 15 minutes before.
What would be the best way to fix this without closing the database? (if possible)
The only thing I could think off closure of the database and ntpdate < time_server_ip >.
Thanks for your time,
Kind regards...Yucon28 wrote:
HelloOracle Database 10 g Express Edition Release 10.2.0.1.0 - product
Release of centOS 4.8 (Final)
VMWARE vsphere clientI have a question about NTP. I recently discovered that I forgot to install and configure ntp on my server. The time is now 15 minutes before.
What would be the best way to fix this without closing the database? (if possible)
The only thing I could think off closing the database and ntpdate
. Thanks for your time,
Kind regards...
Oracle does not really. Allows you to adjust manually the time with ntp is no different to the database of the BONE by automatically adjusting the change to and from DST. Oracle following its transactions by RCS, no time.
-
How to set the speed with XPS motion control
Hi guys,.
I put a LabView VI to State micrometer two control via a movement XPS controller. I need States to query with different speeds, but I can't find a way to do it, any ideas?
G.
P.S. sorry for my English mistakes is not my native language
Hi I finally found my out of this issue using the PosSGamaParameterSet block.
-
How to see the chart with labview WebService
Hi all
I am looking in the labview 8.6 web services option. I've seen some simple examples that can be found here on the website of the NC. But these examples generally deal with static data. As in the example of the sum, you enter your parameters in the URL, and the result is displayed in your web browser.
What I want to do now is display a chart in my web browser that show a mobile signal. But I'm having a hard time the realization of this. How to make this work? Do I need AJAX, Measurement studio? or is it sufficient to use the labview web service.
Best regards.
ynse,
You are right that web services do not require runtime must be installed on the client. Unlike the remote panels that make the VI on the client, web services nothing do with the client at all. Simply, the web service is running on the server and returns data to the client. The customer can return the data, but he wishes.
Your question about studio of measure and AJAX is really asking questions on the client end. You can certainly use the AJAX controls that are updated with the data they acquire a web service from LV. A graph, however, is extremely difficult because javascript has not yet drawing capabilities.
Web graphics I've seen do one of the following:
-'Draw' the points on graph using HTML elements with javascript. It of complicated, would be difficult to get working on all browsers and would have problems of severe performance with large data sets.
-The web service returns an image of a graph that refreshes the client. It takes more bandwidth than necessary, and the server must be able to take a snapshot of the graph. (LV real-time cannot use this approach.)
-The graph is rendered using a plugin for the browser. There are many technologies that can be used to do this: Java, Flash, Silverlight, etc. The example you mentioned used flex from Adobe which is a valid approach that you should not be quick to dismiss.
Measurement Studio is not my area of expertise, and I don't know what it can provide for the creation of a graph. What it provides probably made use of one of the above methods.
Nathan
-
How to set the parameters of width image scroller
I followed a tutorial on how to build an image thumb wheel. In this tutorial the scrolling of the image extends from one side of the stage to the other, i.e. flash to the edge. I want to shorten in width, as 50 pixels or the other side of the stage. How to set these parameters? What would be a line of code to cut where I want? Here's what I have for the construction of the wheel:
/////Build Scroller MovieClip to Contain Each Image var scroller:MovieClip = new MovieClip(); var padding:Number = 10;//creating a var for padding to be used later on in easier calculations this.addChild(scroller); scroller.y = 600; scroller.x = padding;
(I tried scroller.x - but he only positioned the scrolling differently on the stage. Once it scrolls on mouse over it yet completely jumps to the left, and in any case it doesn't take care of the right edge)
Chances are that you only need to add a mask for the scroller object. Create a rectangle that is as wide as you want the thumbs on the stage that it becomes a movieclip/sprite and assign it an instance name. Then assign it just like a mask for scrolling using the: scroller.mask = masksInstanceName;
You may need to adjust the code of a scroller for use limits of the mask instead of the scene if it currently specifies limits for scrolling.
-
How to set the zoom settings menu for lecroywaverunner 6050A
Hello
I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.
I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.
I just need to put the horizontal and vertical centers and scales.
If anyone can help,
Thank you.
Hello
I use F1 as my FFT here track.
Commands to change the scales are:
Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"
Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"
Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"
Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"
I also want to point you to an application on the scope that will help you.
If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"
The browser is an interactive application that will present all automation methods and properties that are available on the scope. He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope. It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).
Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf
Page 1 - 5 has a quick introduction to the browser and its use.
I hope that it becomes operational.
Kind regards
Leonard Brown
LeCroy sales engineer
1-800-5LeCroy
-
How to set the storage space allocated to the restoration of the system to 200 MB?
Could you tell me how to set the maximum storage limit to 200 MB?
Whenever I have delete system restore points, my hard disk free space increases about 10%. About a week or so later, it's back to where it was before I deleted the restore points.
It is very important for me because I am sure that storage space is set too high.
Hello
See the "BOLD" marked links with more information to help.
Phantom memory also holds your restore VSSadmin points it defines parameters.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
How to turn System Restore on or off in Vista
http://www.Vistax64.com/tutorials/66971-system-restore.htmlAdjustment of the amount of disk space, System Restore uses for restore points
http://bertk.MVPs.org/html/diskspacev.htmlHow to change how much Space System Restore can use
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htmShadowStorage vssadmin commands
http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=trueGuide to Windows Vista system restore
http://www.bleepingcomputer.com/tutorials/tutorial143.htmlExpiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
backup and at the time when there are high levels of input/output
http://support.Microsoft.com/?ID=826936A good utility:
Explorer of the shadow - free
http://www.ShadowExplorer.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How to set the SafeSearch settings in the Bing app?
When you use Bing, how to set the SafeSearch settings?
SafeSearch settings is accessible through settings App / in Bing SafeSearch.
SafeSearch (and all the measures taken within SafeSearch) parameters are NOT shared with bing.com experience. For example, you can have SafeSearch within the app set to OFF, but have the same function moderate to bing.com experience value. In other words, these settings are not shared across app & bing.com experience.
For more information on the experience of bing.com, see this article: http://onlinehelp.microsoft.com/en-us/bing/ff808441.aspx
-
How to set the number of e-mail messages that are stored on my iPhone
How to set the number of e-mail messages that are stored on my iPhone – so when I don't have a network connection I can see a 'large' number of messages in my Inbox etc.
This is series is not defined in the world
You must go to settings-> mail, contacts, and calendars and check the settings of your e-mail provider offers in this area
-
How to set the time that my screen stays on?
How to set the time that my screen lights up. I have an iPod Touch 6?
Settings > general > auto-lock
-
How to set the default android home page.
How to set the home page in the latest browser of firefox for android?
Hello:
Unfortunately you can not remove the top sites home page but you can pin a site, remove a site from unpin it and change the url of a pinned site.
Please read this article for instructions.
I hope this helps!
-
How to set the time between slides in a slideshow (iPhoto, el capitan)
How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.
See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice
Maybe you are looking for
-
tryimg to log in. tells me that the username and password is correct. tried several times to put in sentence captcha. keeps refusing the captcha even when it is correct. Another way to open a session?
-
Flatten XML does not record the names of the ListBox element to the XML file.
On my front, I have a ListBox indicator that has strings that the user can select. Also, the user can edit items in the drop-down list to add new items. After that the user selects one and pushes my "Save" button, I use the flatten XML function to sa
-
Why used my montior come in clear?
now the image on the monitor will not come in anr clear I have not now what to try his similar ive got high contrast... ??
-
Hello I recently bought computer laptop 17-j150ca I installed the operating system Windows Server R2 2012 on it and the drivers installed on drive C in the Device Manager I see drivers are intalled but my sound card, Wifi and some devices still do no
-
The screen is broken but it works, but I want to have my back HP as on the first day back. What can I do to replace the screen? How much does it cost? It is a HP 7 5701 stream