How to set the power settings - Satellite Pro A10 with Win XP Pro

I an A10 Pro of the Satellite with Win XP Pro installed and cannot access the power settings. When I go into the power settings in Windows, I get a msg telling me to use Toshiba Power Saver and Win power settings are grayed out.
I installed pwrsav-spa10-xp-60007-.zip which tells me that it is installing the Toshiba Power Saver, but always Win power settings are greyed out and I can't find no separate application "Toshiba Power Saver".
The BIOS shows ' version of BIOS ACPI = 1.30.
Can someone advice how to change the power settings please?
Thnx.

Dave

Advertisement

Hi Dave,.

You have the "Toshiba common Modules" installed? They must first of all for many models of Toshiba, and power settings module is an add-on for that.

If you do not have the appropriate restoration or the utility CD handy, the drivers can be downloaded from the Web from Toshiba website.

I hope this helps, let us know how you go

Weezle

Tags: Toshiba

Similar Questions

  • How to set the power (watt) to resistance?

    How to set the power (watt) to resistance?

    Hello

    What you can do, for the purposes of simulation, is to use the RESISTOR_RATED component (find under the Basic, the RATED_VIRTUAL family group). It is a component of interactive virtual resistance you can use and set the maximum power. If the power is exceeded, it will show you an animation when this happens.

    Best regards

  • How to set the SafeSearch settings in the Bing app?

    When you use Bing, how to set the SafeSearch settings?

    SafeSearch settings is accessible through settings App / in Bing SafeSearch.

    SafeSearch (and all the measures taken within SafeSearch) parameters are NOT shared with bing.com experience.   For example, you can have SafeSearch within the app set to OFF, but have the same function moderate to bing.com experience value.  In other words, these settings are not shared across app & bing.com experience.

    For more information on the experience of bing.com, see this article: http://onlinehelp.microsoft.com/en-us/bing/ff808441.aspx

  • Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

    Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

    You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

  • How to change the color of Satellite Pro P300 settings

    I just received my new laptop computer and cannot for the life of me find how to change the color settings in the monitor.
    My old desk there was a button on the monitor.

    In a first time laptop user im nuts will try to find how to change my monitor settings...

    If anyone can help id be so grateful

    Please don t mix the portable computers internal monitor with external PC monitor.
    You won't find any control unit and on the external monitor that would help you to change the color.

    I put t know what your laptop smart chart uses but my laptop supports Intel graphics card and pre-installed (in Control Panel) Intel Graphics Media Accelerator provides a few color correction settings.
    The parameters are; color, gamma, brightness and contrast

    Here, you can set values between 0 and 100

    Maybe it's what you're looking for

  • Satellite C - How to change the power settings for the WLAN?

    How can I change how not having the power cable plugged affects the performance of my wireless network?

    Basically, my wireless works well when the power cable is connected to my laptop, but when it is disconnected from switching between web pages takes a lot of time and the signal is lost and must be restored each time between each Web page. Is that what I can do about it?

    Hey,.

    You can find the WLAN Card settings in Windows to energy saving power management:

    How to manage Windows power management features:
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  • How to set the zoom settings menu for lecroywaverunner 6050A

    Hello

    I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

    I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

    I just need to put the horizontal and vertical centers and scales.

    If anyone can help,

    Thank you.

    Hello

    I use F1 as my FFT here track.

    Commands to change the scales are:

    Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

    Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

    Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

    Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

    I also want to point you to an application on the scope that will help you.

    If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

    The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

    Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

    Page 1 - 5 has a quick introduction to the browser and its use.

    I hope that it becomes operational.

    Kind regards

    Leonard Brown

    LeCroy sales engineer

    1-800-5LeCroy

  • How to change the power settings to activate the fan stops during the day before.

    Since my computer has turned off the fan in the standby mode.  Suddenly, after having entered the day before, the fan continues to run.

    Where can I set the power standby mode, so that the fan stops?

    You mention not likely this fan, case fan? That would be controlled by the drivers from your mobo, obtained from your mobo site

  • How determine/set the power management setting

    Is there a way to determine and set the power management setting / adjustment of the political power of esx host through PowerCLI?

    Something like that

    $desiredPowerPolicy = "static"        # Options are: static,dynamic,low,custom  
    
    Get-VMHost | %{
        $powSys = Get-View $_.ExtensionData.ConfigManager.PowerSystem
        $key = ($powSys.Capability.AvailablePolicy | where {$_.ShortName -eq $desiredPowerPolicy}).Key
            $powSys.ConfigurePowerPolicy($key)
    }
    
  • How to access the BIOS on Satellite Pro 4600 settings?

    Guys,

    I received a Satellite Pro 4600, unfortunately this laptop has 2 and a half proceeding on this issue. The first is MS2000, then XP then an incomplete installation of XP. When I start the laptop, it asks which OS I want to use. I have a legal copy of XP that I bought and I want to reformat the computer laptop and put on a new install of XP, the problem is how to enter the BIOS to change the settings to boot to a CD?

    Any help is greatly appreciated.

    Steve

    Hello

    First of all you n t need to access the BIOS to boot from the CD.
    You can simply press the F12 key immediately after the laptop has been powered.
    It would show the available boot options.

    Alternatively, you can press the C button that would automatically allow the CD/DVD drive as the boot source.

  • How to set the power management settings to prevent my system mode sleep?

    computer stopped at the fast

    How to stop the computer after shutdown if you mount a way for only 30 to 40 seconds

    Type the word power in your Start menu, then choose "change when the computer sleeps."

  • How to enter the BIOS on Satellite Pro NB10-A-100?

    Hello

    I have a laptop Toshiba Satellite Pro NB10-A-100 and I want to enter the BIOS Setup and I can't.
    What is the key combination to get?

    Thanks in advance.

    Perform a complete shutdown in Windows 8 - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    Restart your computer and try to use F2 or F12. If you use F12 there should be opportunity to enter the laptop configuration settings.

    Please test and send feedback.

  • Re: How to disable the BIOS on Satellite Pro A300 - 1 2 pass?

    I have a Toshiba Satellite Pro A300 - 1 2, some how the BIOS got locked and a startup password has been enabled, I tried to get in the BIOS to disable the startup password but without any job.

    What I need to send or take it back to Toshiba to take them off for me?

    Thank you for your time.

    If the BIOS password does not work for you, you need professional help. Contact the nearest Toshiba service and they can remove it for you.

  • How to wear the Vista/Toshiba Satellite Pro A200 software after upgrade HARD drive

    Hello.

    Have ordered a Seagate Momentus 7200.02 200 GB SATA-300 7200 RPM 16 MB 2.5 "for my Satellite Pro A200GE - 26. Toshiba slow disk with this laptop ships is simply not fast enough so it is replaced.

    My question is this: can I use the recovery disc of the DVD came with my laptop to reinstall Vista and all the Toshiba drivers on this new album?

    If this is not the case-how can I do?

    If I can do it - could you give me a checklist of things to do?
    Are several factors I need to get used to exist on the recovery disk?

    I ask this because I know how to do this on a PC with the Original OS disc, but I was horrified when my laptop has been delivered and no original OS disk - I think it's very bad for any help would be accepted with gratitude.

    Thank you in advance,

    Kenny.

    Hello

    You should not worry about the whole procedure, just install the HARD drive, put the recovery CD in your CD/DVD drive, press F12 and start with your CD drive or just press 'C' (which automatically inserted CD, boots).

    The recovery is not limited to a specific HARD disk, it automatically adjusts the size of the partition and install EVERTHING on your disk as a preinstalled OS shipped directly from the factory. Don t you need some additional drivers or software, the only thing you need to do is to copy your personal data on the system drive and customize your windows.

    It is the intention of recovery media: put it in and it does everything by itself.

    That's all. :)

    See you soon

  • How to change the input on Satellite Pro M70 keyboard language?

    Hi guys,.
    I am facing problem with laptop M70-122 key boards. Keys @ and "are interchangeable. Printing on keyboards are same as a normal PC. But when I press the SHIFT + 2 ket I get "instead of @ and vice versa." How can I solve this problem.

    Hello

    Believe me, it s not a failure or a problem.
    You have bad language keyboard configurations.
    I suppose that you have set the US or UK keyboard. Please change these settings

    Please see the Control Panel regional and language options languages details. There you can change keyboard settings.

Maybe you are looking for

  • Cannot set WLAN on my Satellite L350D-131

    Hello world Recently purchased the 350 d, try to set ISPis "talktalk" up to wireless working, and after having spent all day today on the phone to them, they feel that my laptop is broken. My router is a "talktalk" Echolife hg520 and my laptop 2 days

  • Printing on Envy 5530 problem

    I try to print a 4 X 6 photo. Photo appears in the Viewer, but the text is printed instead of the photo? Have a 5530 craving. I posted this on 6-11 (now 6-12) and have no answers. How long does take a response?

  • data written in excel string is text rather than double when opened in excel

    I have the code that combines a time, many double arays string and some double rooms. Everything seems to work fine, except when I open the data file created in excel, the first cell after the time string is always a string and not digital. It is the

  • I have problems trying to download Lightroom 4.

    What does "your system has not been modified", mean?  This is what im see when im trying to download Lightroom 4 upgrade. I have 2 of Lightroom as my brother - brother-in-law installed for me. I've tried to do this 4 LR by myself and do not find this

  • Impossible to activate the flow detection or discovery Webslice in IE8

    I've tried three different installations of Internet Explorer 8, and every time that the discovery of the CNR will not work. The toolbar button always remains gray.  Even when I am on a site with an RSS feed validates. When I go to the power options