How to set the time to preview using the REST Api of the assembler

Hi all

Using the REST API of the assembler, I can't feature "set the time to preview" to trigger a specific model that fires only at a specific time

This is the format that I'm trying:

http://xxxx:8006 / assembler/json/pages/home? Endeca_Time = 2020-04 - 05 T 14:30

I use the correct format? This is the url parameter listed in the documentation of the Assembly

Thank you

It turns out that the documentation is wrong

  1. In assembler.properties (service\WEB-INF) of your REST API, you must define

    1. User.State.Ref = previewUserState
  2. You use Endeca_date and not Endeca_Time in the URL (documentation is wrong)
  3. Coding varies from a browser (you may need to URL encode the date in Firefox)

Example:

http://xxxx:8006 / assembler/json/pages/home? Endeca_date = 2020-01 - 11 T 18:00

The date format is: YYYY-MM-dd' you HH: mm

Tags: Oracle Applications

Similar Questions

  • How to set the time between slides in a slideshow (iPhoto, el capitan)

    How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.

    See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice

  • How to set the timeout of read when using channelReader.ReadWaveform?

    I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

    When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

    No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

    I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

    How to set the timeout so that ReadWaveform() is not the time?

    Here is the code:

    privateAnalogMultiChannelReaderchannelReader;

    privateAnalogWaveform awf;

    publicList GetWaveForm()

    {

    Try

    {

    Task getWaveform = newTask();

    getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

    RangeMaximum, AIVoltageUnits.Volts);

    getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

    SampleQuantityMode.FiniteSamples, NumSamples);

    getWaveform.Control (TaskAction.Verify);

    channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

    AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

    AWF = data [0];

    samples As new List();

    for (inti = 0; i)

    returnsamples;

    }

    catch (DaqExceptionexception)

    {

    MessageBox.Show (exception. (Message);

    }

    List of l = newList();

    return l;

    }

    Thank you

    Curt

    Hi Curt,.

    Here is a Knowledge Base that can help you to set the timeout setting in your code:

    The property using Timeout of DAQmx task in Visual Studio

  • How to set the time stamp for incoming mail?

    How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

    Thank you
    Laura
    2.13.2012

    If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

    If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
    https://account.live.com/EditProf.aspx
    and change the time zones for the good...

    Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

    Noel

  • How to set the size of the Windows Explorer preview pane so that it will retain the size adjusted?

    All know how to set the size of the Preview windows exployer pane.  I can't remember or 'stick' to the adjusted size.  It always develops a great size, concealing of file information (name, date modified, size, etc...) it's very great pain.

    Help, please!

    Thank you

    * original title - preview pane of Windows Explorer is a pain.*

    Hello

    Try this:

    (a) click the "Hide the preview pane" in the upper right corner (on the left of the help) of Windows Explorer

    (b) to resize the Windows Explorer window for how you want

    (c) click the 'Show preview pane' icon in the upper right corner (on the left of the help) of Windows Explorer

    Navigate to the link below: http://social.technet.microsoft.com/Forums/en/w7itproui/thread/569509ae-a37a-441f-8cc3-95d5231b171b

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think, if this post can help solve your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to set the time that my screen stays on?

    How to set the time that my screen lights up.  I have an iPod Touch 6?

    Settings > general > auto-lock

  • How to set the date and time on my HP Officejet pro 8600 more?

    How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

    Hello

    Below are the steps to set the Date and time for your device:

    1. On the Control Panel, press the right arrow key ( ), press Setup ( ).

  • How to set the output meter channel to generate a signal pulse using DAQ6008

    Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

    If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

    Lynn

  • How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

    How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

    I found a solution! -Set the size and position of the façade with the help of the

    File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

    then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

    OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

  • How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

    Hello

    I'm trying to follow the steps described in the following link:

    How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

    It is said

    The software on the target currently supports only the time zoneand deletes the old files?

    I need set the date and time

    and remove all the old unwanted files

    the calendar was gray does not allow me to change the current date.

    Anyone know how to change

    Hi all!

    According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.

    http://digital.NI.com/public.nsf/allkb/FAB0EC4D6E5EE0F386257738005733A3?OpenDocument&MeTC=max_MAXDat...

    If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.

    Please let us know if you have any questions!

  • How to set the date and time hp7500a wide

    How to set the time and day there is no im the screen of the printer option

    I have re installed and it showed as you say the preferences... Thank you

  • How to set the date and time on an hp j5780?

    I need to know how to set the date and time on an HP j5780!

    Help!

    Thank you very much, we did it!

    WY

  • How to set the value of QUERY using PL/SQL process?

    Hello

    I use APEX 4.2...
    How to set the value of the REQUEST using process of PL/SQL which lies before the header - where the value of the REQUEST should appear on the URL?

    Kind regards
    Fateh

    You cannot set a value of demand in a PL/SQL block. You can run a PL/SQL block on a request which is the id of a button for example.

    Denes Kubicek
    -------------------------------------------------------------------
    http://deneskubicek.blogspot.com/
    http://www.Apress.com/9781430235125
    http://Apex.Oracle.com/pls/Apex/f?p=31517:1
    http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
    -------------------------------------------------------------------

  • How to set the doctype node using dbms_xmldom?

    Hi all

    IM using oracle 10g. I generated an xml file using dbms_xmldom.

    I need set the version xml and doctype to my xml file.

    XML version I've defined using dbms_xmldom.writeTofile.

    But not able to set the doctype... tried with dbms_xmldom.makedocumenttype... But no result...

    How to set the doctype using dbms_xmldom?

    Concerning
    Sankar MN

    Published by: SankaraNarayanan.M.N on October 17, 2011 05:40

    http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_xmldom.htm#i1121082

  • How to set the pixels for the softer - edge, in a design? I use PhspCS5 TRIAL grateful for help!

    First of all, I'm not a rather advanced digital artist know the tools of basic (a bit) and I'm pretty good with those who, over the years, however, have a new Mac and better

    visibility for sure and an ASSESSMENT of PSHP CS5 Extended version; what I'm asking is: how to set the pixels... to achieve the softer contour for example. I have

    greeting card templates and is now working on a Christmas tree, with gold stars, they better look (vy-light = blk) but when I ZOOM IN I see the ' wavy lines

    pixels, which appear on the 'place '.  I would like to know how to set the pixels * 1 # and then with respect to colors, when I take a yellow (there are many! yellow!)

    and use my Intuos "tap tap tap" pen drawings (yellow), it does NOT save... (he did it on my other computer and CS4 more aged).  So going

    back to my swatches of color, of... .remember just what yellow I took... ha ha... can be: "not so fast!"

    I buy this subscription at the end of the trial and my bet is that the color picker / working on the purchased version when I "tap tap" to pick up the

    same color II had chosen.  Wouldn't it be good to have a monitor of sorts that says you, what color (s) is used when you need to know, to go

    on the 'design' say after a break for tea, etc.  ?????  (    :

    I save my drawings when facts JPEGs and see now, there's a JPEG 2000... I don't know what it is all about.  I save pdf (1) and a jpeg.  Hope that this sounds

    like what we "do"... When we know much more than me.

    And finally, what program or tool, can a use to put a 'framework' (border) around an eg: 5 x 7 design (again, my goal is for my greeting cards designs.  Are there

    another of Adobe products, I would have to do this.  Free hand has not worked so well, so far.

    I'm in advance, so grateful to you - anyone you may, for your help.  I'm on my way 'Hooray' last now in the hope of success soon... I am a senior of 71

    and so feel I have to really "go there" and learn these basics to ensure my chances of success, at least. Thank you, thank you & thank you! CDW

    Please post in the Photoshop forum.

    http://forums.Adobe.com/community/Photoshop

    Bob

  • How to set the time of the wamp Server?

    Downloaded the latest version of Wamp (Apache 2.2.11, PHP 5.3.0 MySQL 5.1.36)

    Server time is 5 hours later than my time local (America, Chicago)

    Where can I change the settings for time?

    Thanks for your help,

    -Jim Balthrop

    This might help...

    p http://www.dedyisn.net/2009/02/How-to-Setting-default-time-zone-in-Apache-Webserver-for-pH.

    --
    Lawrence Cramer - * Adobe Community Professional *.
    http://www.Cartweaver.com
    Basket for Adobe Dreamweaver
    available in PHP, ASP and ColdFusion

    Stay updated - http://blog.cartweaver.com

Maybe you are looking for

  • Firefox blocks the pc

    Help this is annoying. Last month, while in firefox all of a sudden my computer crashes without reason. The PC everything freezes for 20 seconds, then I can bring up the Task Manager after that. IM under Win 7 on a high end PC for games. I tried to r

  • Satellite Pro A300 - can't get sound to work

    Hello I have an A300 (PSAGDA-01D00R), which I am issues with sound. When I first received it, he had Vista business and the sound wasn't working, so I installed XP but sound still does not work. I then decided on installing Windows 7 and still can't

  • I Heve problem weth my call (error 53) pleace halp me

    I Heve problem weth my call (error 53) pleace halp me

  • Communication remote DataSocket

    Hello I use DataSocket Labview to make a connection between two PC (both running labview) remotely over two different networks (both connected to the internet), I have already developed a program for reading and one for writing and I did a test on a

  • power by using password for touch smart 15-b195sa

    Hi there I need help with my hp touch smart 15-b195sa my daughter entered a power on password and a now forgotten after three attepts to enter the password, I get the 51430125 code, any help would be appreciated John