How to set up a '0' prior to call for outside calls (CCM 6.2.1)

Community salvation.

I think that this issue could be very easy to be decided by the experts of the calls voice cisco. What are the steps required to configure all the internal components of the phones that they must dial '0' to get an outside/international appeal of prior work? Is it a matter of templates for itinerary?

Thanks in advance.

Kind regards.

Hello

Yes, it is a RP "template routing." I hope to share with us your topology what your CUCM & gateway type (MGCP & H323). In any case regarding steps e, please find the below: -.

1-configuration of your gateway that will be responsible for tree calls.on incoming and outgoing CUCM gateway device - select type.

RG 2-group to configure or channel that will include your gateway recorded. CUCM call routing-road/hunting-lines group and assign your gateway listed

3 - RL set which includes your RG that configured in step 2. Routing-road/hunting-other calls list, then assign the RG.

3-model RP to configure or channel. for example

0.161xxxxxxx for mobile

0.00!                 for international

At the partiton award

B - RL that configured in step 3

C - on the bottom, discard numbers "predot."

Test; user dials a number that fits the RPS following 0.161xxxxxxx & 0.00!  the calls will go.

Thank you

Please note all relevant information

Tags: Cisco Support

Similar Questions

  • How to set the PS CC as default application for RAW Mac files.

    What is happening on my Nikon and my Fuji SLR. All of a sudden it will not open in Photoshop CC. It is opening in Photoshop Elements, which is also in my Mac. I want to change it back so that when I click on a RAW file, it opens automatically in PS CC instead of elements. I can click on OPEN WITH and click on CC PS to open it, but I don't want to have to do this extra step.

    Hi JoeRouton,

    Please visit the following link to set the default application like Photoshop for RAW files.

    Default application: How to change the default applications on Mac | IVous

    Let me know if it helps.

    Kind regards

    Tanuj

  • LoginName and paswords are no more saved locally (Windwos 8) how can set Firefox to keep loginnames with password for some Web sites

    for example. If I start Google mail.
    Before I could juist click on the user name to display a list of usernames on the system with corresponding passoword (shown with asteriks).
    Now with firefox and windows 8 I always type in my gmailadres and password. The system never aks more if she has to save these settings

    I found a fair solution by setting "always remember the history. If you restart firefox input usernames and passwords, you receive the question to save.
    Thanks for your help

  • How to set up the iMac and macbook pro for sharing

    I have an iMac desktop running a MacBook Pro runningMavericks and El Capitan. I would be grateful someone guide me through the process step by step to be able to share between these two platforms.

    I know that I should probably update the laptop to El Capitan, but don't have the time to do it now.

    I thank everyone for their tips and advice in advance.

    Essentially, you visit preferences system-> sharing and enable file sharing

    How to connect with the file sharing on your Mac - Apple Support

  • How to set group policies in windows 2008 server for office plexi

    (1) define us group policy for wallpaper of Windows 2008 Server and pushed to all desktop computers.

    (2) but the desktop icons, we receive with blue background.

    (3) how to remove the blue background and make plexi icon.

    (4) I want to know what the Setup program needs to be done to get the icon of plexi in group policy in windows server 2008 standard.

    Hi valerie,

    The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

    http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

  • How to set the SGA / PGA or memory target for the database

    Hello

    We use on AIX 5.1,6.1, oracle 9i, 10g, 11g

    Currently, we manage the databases on the default memory which was chosen at the time of the creation of the databases.

    Now the application owner want to host multiple databases on the same server, so they ask the

    rough idea on the memory required for each database,

    How we calculate the amount of memory required for each database.

    Thank you

    that recommend the SGA ADVISOR?

  • How to set the parameters of the ipmi/ILO for feeding from a script management?

    I have an installation script entirely work for our guests esx4, the only thing missing is implemented ipmi/ILO settings.

    I searched and can't find answers for this, anyone know how to do it from a script?

    If it is ESX, so part of your kickstart could generate the thumbprint and download these results on a NFS server including vMA has access to perhaps a list of host names + digital fingerprint. You could write a small script which basically monitors a directory for updates and then automatically add to vCenter once the system is ready to go, you can probably do something similar with ESXi, but it will be more complicated that you have not a real way to "launch" the host. However, you can change the image and put your own scripts such as a python script to extract the footprint and again do the same thing by dumping at the exit of a volume shared including vMA has access to.

    If you are interested in editing script ESXi, take a look at 4 part of Maish's article on how you can configure the ESXi ping to a management host host - http://technodrone.blogspot.com/2010/04/esxi-deployment-solution-beginning.html

    =========================================================================

    William Lam

    VMware vExpert 2009,2010

    VMware scripts and resources at: http://www.virtuallyghetto.com/

    Twitter: @lamw

    repository scripts vGhetto

    Introduction to the vMA (tips/tricks)

    Getting started with vSphere SDK for Perl

    VMware Code Central - Scripts/code samples for developers and administrators

    VMware developer community

    If you find this information useful, please give points to "correct" or "useful".

  • How to set up the new switch/ports/NIC for MS iSCSI initiator

    Hello

    I'm looking for data on our main server snapshot and then include it with our VM through scripted admsnap commands. I found that the only way to attach/detach when the server is running must be involved in the Microsoft initiator path.

    I am now tripping over the implementation of networks necessary for this virtual machine display the SAN using the initiator.

    Our up to date is:

    vSwitch0 that vmnic0 & 1 (range 192.168.1.x) and is used for LAN traffic for the virtual machine

    vSwitch1 that vmnic3 (192.168.252.x range) and is used for SAN storage processor has

    vSwitch2 that vmnic2 (range 192.168.253.x) and is used for SAN B storage processor

    http://i44.Tinypic.com/20pezr4.gif [line] 

    Our ESX box can connect to the LUNS on the area of SAN ok but I just can't get the same ping VM after the addition of two new network cards and to configure them with the correct IP address, which I suppose is because the 192.168.252.x and 192.168.253.x ranges are not present on the virtual machine and there is this problem I would appreciate some advice on SAN storage processors. How you allow the virtual machine is to use vSwitch0 & 1

    Thank you.

    Hello.

    vSwitch0 that vmnic0 & 1 (range 192.168.1.x) and is used for LAN traffic for the virtual machine

    vSwitch1 that vmnic3 (192.168.252.x range) and is used for SAN storage processor has

    vSwitch2 that vmnic2 (range 192.168.253.x) and is used for SAN B storage processor

    Our ESX box can connect to the LUNS on the area of SAN ok but I just can't get the same ping VM after the addition of two new network cards and to configure them with the correct IP address, which I suppose is because the 192.168.252.x and 192.168.253.x ranges are not present on the virtual machine and there is this problem I would appreciate some advice on SAN storage processors. How you allow the virtual machine is to use vSwitch0 & 1

    I'm guessing that you have added two new adapters with the label 'VM Network' network to this virtual machine?  I'm also guessing that vSwitch0 has no access or routing to the storage network.  If so, you will need to do is change the vSwitch1 and vSwitch2 to add a new type of virtual machine connection.  Click on the 'Properties' link beside vSwitch1/vSwitch2 and in the tab "Ports" click on the button 'Add '.  Choose 'Virtual Machine' in the type of connection, it give a descriptive label and click Finish. Then return to the virtual machine (change settings) and change the network connections in your virtual machine to point to the new label, that you just created.  Finally, configure or verify) addressing IP in Windows and try the Ping again.

    Good luck!

  • How does set a strategy of password of user for the Agile PLM for process?

    How has established password policy so that the password has a minimum length of 10 characters?

    The specified required characters section is located in the ValidationSettings.xml file, which uses the Validation Framework. To create more specific rules, such as rules, not only using RegEx, you can write a custom validator. A custom validator is a class written in c# that can run a validation routine and return the display errors.

    See the documentation of the Validation infrastructure in the Pack of extensibility for more details.

  • How to set up the filter to provide data for the last 7 days

    Hello

    In our environment of BAM Oracle 11 g, we have a data object that stores a date with the datatime data type field. In the report of BAM, we want to display data only for the last 7 days. Not sure how we can configure the filter to "during the" last 7 days

    Can someone help how to achieve this requirement?

    Thank you.

    Please try the following-
    (1) open the chart bar in edit mode.
    (2) in the editor view, click on the button 'Properties', then go to the tab "Format of the value.
    (3) in the tab "Format of the value", to "apply to" drop-down list, select your datetime field.
    (4) in the contiguous list of 'Catégories', select 'TimeUnit' as the category.
    (5) in the following list of 'Type', select 'day of the week.
    6) click OK/application to see the relevant changes.

    Now you should be able to see the day of the week on the horizontal axis 'Thursday', 'Saturday', etc.

  • HOW TO set UP or specific graphic processor associated for applications using 3D graphics video and/or

    Switchable Graphics appears saying: «...» ", the application uses 3D graphics and video, but is not currently associated with a specific graphic processor.

    I am not able to configure it.
    Help!
    Thank you.
    MK

    Is what kind of PC/Laptop? Some use a separate program to configure the use, and others are in the BIOS to turn on and off.

  • How to set, view, change, or remove special permissions for files and folders in Windows XP

    It is a problem with iTunes. About 8 months ago I had to reinstall my operating system. When I reinstalled iTunes, it does not recognize my music already purchased. He tells me that songs should be allowed, I put my username and password and it tells me that they are allowed.

    So I finally emailed Apple support recently. They suggested that this is a problem with the permissions on the iTunes Media folder. Apple support gave me the following URL address: http://support.microsoft.com/kb/308419/en-us.

    I followed the instructions on the Microsoft support site. But when I right click on the iTunes Media folder, and then click Properties, there is no security tab, with the following statement on the Microsoft Support site.

    I also tried the instructions for "If you are not joined to a domain and want to view theSecurity tab. "In Control Panel, I don't have the choice of themes & appearances. There is a choice of Folder Options, but once in the view tab, there is no choice ofuse simple file sharing.

    If you have any other questions, please let me know.

    Follow the steps described in this article under together, view, edit, or delete special files and folders permissions .  From XP Home Edition in safe mode makes the Security tab appears. Boulder computer Maven
    Most Microsoft Valuable Professional

  • How to set up the media player on laptop for A/V/output

    Can I configure Media Player on my laptop Acer for A / V output to a Wonderwall projector?

    Hi StuartKukunaris,

    1. what exactly do you mean when you say that you want to configure Media Player on my laptop Acer for A / V output?
    2. which cable you try to connect?

    You will be able to view any content that is on the computer to the projector if you have plugged it like a spotlight.
    Connect to a projector: http://Windows.Microsoft.com/en-us/Windows7/connect-to-a-projector

    Hope this information is useful.

    Thank you and best regards,
    Savan - Microsoft technical support.

  • How to set up the animated banner of edge for DoubleClick environment

    Hello

    I is currently working on a banner HTML 5 for work and am now ready to publish for direct deployment to a doubleclick enviro.

    Currently, I'm stuck with click-through function that would otherwise take 5 min on flash.

    What is the best way to prepare a html banner Adobe animate so it'll work correctly on servers like doubleclick? With this question, I'm mainly curious on click function.

    Thanks in advance.

    Go to the DC Studio models and download model page on board in and follow the Guide building.

    Rich Media Gallery | Database model

    Edge in page build guide - Creative Solutions help DoubleClick

  • How to set up my printer HP photosmart premium for working with lightroom 3.6

    Windows-live0001.jpg

    When I try to print from lightroom image above, this is what I get. If I print using the HP Desktop gadget, the impression is good and colors are very well. The analysis of the image it has brightened a bit.II have an Acer Aspire X 3950 PC running windows 7 Home Premium (64-bit).  The printer is a HP Photosmart Premium C310a. I have the color profile is managed by the printer.

    Help, please!

    When you have your printer do the color management, you will need to tell Lr color is .

    See screenshot:

    Only one of the two can do the color management: the printer or Lr. If both are you will get bad results. It goes the same for Photoshop.

Maybe you are looking for

  • PDFs in iBooks on iPad Pro is no longer syn with iBooks on Mac

    Since the update to IOS 9.3.5 I can sync is more PDFs in iBooks on my Pro iPad with iBooks on iMac with OS X 10.11.6. Before updating to IOS 9.3.5, I had no problem of synchronization of files PDF between systems and I have not changed the settings o

  • It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phone. What's wrong

    Whenever I plug my charger into my iPhone more 6 seconds I get a pop that says this accessory may not be recognized and will not take a charge. It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phon

  • iTunes store only show 2 results?

    I'll keep it simple, I've had an iPhone 6 on 9.3.1 and whenever I'm looking for a song or an artist in the iTunes store only 1 or 2 results appear, usually not those I want. I did a reset software and everything. Anyone know what is happening?

  • Lack of BT on the Satellite C50D

    First of all I'm not the slightest bit techy so I hope it's a simple solution I use to have the blue tooth on my laptop, it worked fine, but now it's gone? No blue tooth under settings, non-"devices to add" option. I clicked on blue tooth Wizard but

  • Aspire 571PG-V5-9814 Upgrade RAM?

    Hello! I have a question for the laptop Aspire V5-571PG-9814. I am considering an upgrade of RAM, because I need to have several tabs open at the same time. (Well, envy, no need). I looked at essential for options: http://www.crucial.com/store/listpa