How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point?

Similar Questions

• How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?

  How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?
  My children are free to use the internet - but I don't want them to be able to hide their internet activity to me.
  Thank you.

  Try this new extension - turn off private browsing:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/disable-private-browsing/

  Ignore the review I did there on the 22nd, as both versions again, improving have been released during the 6 days and most of the articles I've written about have been fixed.

  Richie just needs to get to the function disable compensation no browsing history, who works at.

• Set password Linux ATA hard drive / Toshiba Satellite Pro U200

  Sorry for the long post, but I want to be as specific as possible:

  1)
  I use a Toshiba Satellite Pro U200 under Linux (OpenSUSE) for some years now. Works fine without problems so far, even the fingerprint reader works. I deleted and never used the Windows XP preinstalled.

  For security reasons, I have now decided to put a HDD ATA password, in case the laptop is lost or stolen (changed drive for a disk Seagate Momentus 7200 FDE.2 SATA II with full encryption of the disk material).

  In order to get the protection offered by the full disk encryption, I need to set a password for the ATA. During startup, the Bios must request the password and unlock the drive only when the password is correct.

  2)
  My problem is: in the Toshiba laptop it is impossible to set the hard drive ATA password directly in the bios (as is possible in HP laptops, for example). Toshiba there is only one way to set the password to disk, which is a software utility for Windows XP (named 'Assist'). But I don't want to change the operating system only to set this password.

  3)
  Therefore, I tried the linux instructions

  hdparm - user-master m - security-all-pass SecretMasterPassword/dev/sda
  hdparm - user-master u - security-all-pass SecretUserPassword/dev/sda

  which are used for adjustment ATA passwords. Indeed, at first, it seems to work very well. The password is set and the drive is locked.

  4)
  When I restart the laptop, the Bios the HDD password request, as it should do.

  But he does not accept the SecretUserPassword prior to seizure. The answer is "wrong password", or similar.

  5)
  Analysis:

  I have no doubt that the password has been set correctly: I checked by restarting the laptop through rescue DVD in linux and unlock the disc via

  hdparm - user-master u - safety - unlock SecretUserPassword/dev/sda

  in order to use it. No problem, it works as supposed to. After the release, the disc is usable as usual. And I can also disable the password via

  hdparm - user-master u - security - disable SecretUserPassword/dev/sda

  After you disable the password, the laptop starts normally again, but I have no password.

  When I re-enable the password bios Toshiba again asks the password during initialization, but does not accept the (correct) password on entry.

  6)
  Does anyone have an explanation for this behavior?

  Bios Toshiba has somehow changes the password entered by the user, before being sent to the disk? I think that this would be inconsistent with the ATA standard.

  Anyone managed to set/change the password to ATA in a way that the disc can be unlocked via the internal order of the Bios, without installation of Windows XP and the Toshiba Software 'Assist '?

  Thanks for reading this long post so far. Any response is welcome.

  hmetz

  Hello

  As you probably know Linux is not supported by Toshiba and if you n t get some good advice here I recommend you to visit a few Linux forums and try to discuss with experts in Linux it.

• How to set the VPN connection in Windows 7 64 bit?

  Hello

  How can I set up a Vpn connection in Windows 7 x 64 bit.

  Thank you.

  Hello

  Go to the network control panel and Internet-network sharing Center.

  http://www.windows7hacker.com/index.php/2009/08/how-to-set-up-a-VPN-connection-in-Windows-7/

  Note that you need to know the login and the password to access the Internet :)

• How to set up the connection to a wireless network.

  I have a wireless net via my connection uverse and I need to know how to configure my computer dell laptop, which has a wireless card to connect to my wireless NET.

  Hello

  Please see the links below.

  How to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?&docid=DSN_370076&isLegacy=true

• How to set up web hosting using parallels plesk panel?

  Hello

  After you resolve my wampserver question, now I came to stuck in another problem how to set up my purchased GoDaddy VPS hosting using parallels plesk panel 11? I'm just trying to find some tutorials or guide on this in order to easily configure and complete. But it was really hard to do, that I do not know a lot on the technical side with the server, hoping that this could make bad if I did something wrong in there during the configuration. So, I want to help a person who can help me here to implement all of this.

  Kind regards

  Babu RAM

  Hi Ram,

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forum.

  You can follow this link to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How to set the doctype node using dbms_xmldom?

  Hi all
  
  IM using oracle 10g. I generated an xml file using dbms_xmldom.
  
  I need set the version xml and doctype to my xml file.
  
  XML version I've defined using dbms_xmldom.writeTofile.
  
  But not able to set the doctype... tried with dbms_xmldom.makedocumenttype... But no result...
  
  How to set the doctype using dbms_xmldom?
  
  Concerning
  Sankar MN
  
  Published by: SankaraNarayanan.M.N on October 17, 2011 05:40

  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_xmldom.htm#i1121082

• How to set the NFS storage using the HA function

  HI friends,

  How to configure NFS storage to use the HA?

  Do all esx hosts, see cluster the same lun, comfiguration files?

  Thank you.

  You need:

  • VMkernel for NFS ip Storage

  • Mount the NFS on each cluster host esx (as shared storage) group so that all ESX hosts see your virtual machines

  How to:

  • Create new Cluster

  • Edit the Cluster and enable HA for the cluster

  • For the game from the beginning to 'use the cluster configuration' default virtual machine

  • Then you're ready to go

  Others, I think, someone will add for you...

  System engineer

  Zen Systems Sdn Bhd

  Malaysia

  www.no-x.org

• How to set up bluetooth for Windows by toshiba stack

  Trying to install different fireplaces / drivers in order to use the bluetooth features.

  These instructions are incredibly confusing for something seemingly simple. I think I have all the chimneys of nesicery / driver updates however

  Im not very good at this stage. I could use a little help here.

  Hello

  Most Toshiba have start - programs - Toshiba - BlueTooth.

  Check with Toshiba Support, their drivers and documentation online and ask in their forums where he
  others will be with the same or similar models.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model - value downloads - so all operating systems - BlueTooth
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ------------------------------------------------------------------------------------------------------------------------

  Information to help you if you need problems (use Toshiba configuration methods to activate BT).

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Add a BlueTooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot connect Blackberry mobile access point using Windows computer.

  Original title: connection problem

  I use windows 8 on my hp15 and also a cell phone blackberry q10... I noticed that the hotspot from my phone does not appear on the windows network. but hotspot of the else phone shows and connects perfectly well and my q10 hotspot shows and connects on their own computer... any idea on what could be the problem?

  Hi Adam,

  Thanks for posting the query on Microsoft Community.

  If I understand correctly, you are unable to connect the mobile access using Windows computer point. Don't worry, we will help you with the question. It could be matter of settings.

  Manage the network and other utilities mentioned in the link below and check if it helps.

  Why can't connect me to a network? :

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Also try the other steps in the link below.

  Mobile broadband from end to end:

  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  For reference:

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?externalId=KB31857&sliceId=2&DOCTYPE=KC&noCount=true

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/55574/mes1342811963579.jsp

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Cannot connect to my Satellite A210 adapter for access point

  Hey everybody...

  I have a little problem with my wireless. We have some books and access point. Everyone can connect to access point except me. I have the Satellite A210-127. Do you know where is the problem? How can I connect to the access point?

  Thank you

  In a first time, you must activate WLAN antenna correctly. Upon first use WLAN switch and set it TO position (the LED will be ON). Next step is to use the FN + F8 key combination. Don't forget THAT WLAN is enabled.

  After this use please ConfigFree radar to see if the access point is visible for your laptop.

• Connection of comments on the second WNR1000v3 as access point does not connect to Internet

  I have a WNR1000v3 (firmware V1.0.2.68_60.0.93NA) connected to the WAN and it works well. His IP address is 192.168.0.1, subnet 255.255.255.0, gateway 192.168.0.1, mask and DNS servers are on 8.8.8.8/8.8.4.4. DHCP is configured to 192.168.0.10 to 192.168.0.100. I have a guest connection configured and it works well.

  I have a * second * WNR1000v3 (same firmware) bound to the first as access by using these instructions: http://kb.netgear.com/app/answers/detail/a_id/23784/~/how-to-automatically-configure-a-netgear-route...

  I gave him the IP 192.168.0.2, subnet mask 255.255.255.0, gateway 192.168.0.1, and DNS servers again the value of Google. It has the same SSID wireless as the main router and I can move seamlessly between the two. The devices connected to the LAN ports on this access point work very well. Wireless connection works fine.

  I then configured the connection even guest on the second router (the one running in access point mode) and I can get an IP address when I use it. However I can't access the Internet. Ping 192.168.0.1, 192.168.0.2, and 173.194.33.137 (the IP local google.com) all fail.

  Guest connection is not supported on a router functioning as an access point? Or am I missing something really obvious?

  Thank you

  Bill

  @storm1985 I suspect that your configuration means that all the second router LAN ports will also forward only to the Internet. But this gives me a good idea to use another router just like an access point wireless for the connection of comments. (I seem to accumulate old routers.) Unfortunately, I don't have the time to try this out until late in the week, but I'll certainly do and report. Thank you!

• How to find the driver of modem of Toshiba Satellite U305-S7432 for Suse operating system?

  Hello friends! I have laptop Toshiba Satellite U305-S7432. I use the Suse operating system. But my OS couldn't find the modem driver. Where can I find the driver of modem for Suse OS? How can I solve this problem. Please help me. ?:|

  Best regards. ;)

  Hey Buddy

  Unfortunately, it seems that Linux is not supported by Toshiba and so there is no Linux drivers published on the page of the driver.

  If you need some drivers, I would recommend looking at the sites of chip manufacturing.

  But visit these Internet sites about Linux on Toshiba laptops:

  http://newsletter.toshiba-tro.de/main/index.html

  http://www.Linux-on-laptops.com/Toshiba.html

  Welcome them

• Can I use non-Toshiba Satellite P200 - 14H on display driver?

  Can I use display driver other than the driver from Toshiba support page?
  I recently got a massage from microsoft solution centar who recommend me to visit the AMD web site to find the most recent driver.
  So I wonder if I can get my license with ordinary, non-Toshiba driver and that I could possibly get or lose with it?

  Hello

  You can use it but only at your own risk.
  The non-Toshiba graphics card drivers are not tested and don t support protection against overheating which contribute to avoid a damage due to higher temperature GPU.

  The non-Toshiba graphics card driver must be installed in the Device Manager.
  Then, use you an advanced installation procedure and can point to the driver files, stored on the HARD drive.

  Welcome them

• How we set up Thunderbird to use the e-mail of the company through Google

  We have emails business through Google, gmail. How configure you Thunderbird to use a Gmail in the form user.cadpartsusa.com?

  Enter your information in the installation wizard. When it fails, enter the name of the server and all the other features of the site and test the setting you have done manually.