How to set up so that VMs automatically starts when the host reboot?

Similar Questions

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• LR6 will not automatically start when the memory card is inserted

  Hello

  Recently upgraded to LR6 from LR 5.7.1. When LR 5.7.1 was installed, it would automatically start when the memory card is inserted. With only LR6 installed it does not open when the memory card has been inserted.

  I "see the import dialog when a memory card is detected."

  I have LR installed 6.0.1.

  When the memory card is inserted, you receive the following error message:

  

  If I right click on the disk memory and select Auto Open play, a list of programs appear particularly LR. The program is highlighted is

  

  If I click on LR in the list above, I encounter error "Application not found".

  When I manually start LR6, it works and I can manually import from memory card.

  What can I do to fix this?

  Thank you

  Stu

  Yes, Autoplay is still trying to run LR5.

  There is a previous thread with notes on how to edit the Windows registry to resolve this problem, if you are comfortable doing.

• don't want itunes to automatically start when the ipod is connected to the pc

  How can I prevent itunes from automatically launching when the ipod shuffle is connected or when the pc starts?

  Open iTunes, go in Edition > Preferences > devices and place the check mark to prevent sync automatically when the device is connected.

• How to set preferences so that open new tabs to the same page that activates when the command-T has been affected?

  By opening a new tab, the default tab opens to thumbnails based on recent history. The Safari, I want the new tab to open * to the same page, as was active when command-T was hit *. What are the specific actions, to set the default value (preference), new pages to open 'same page '? ('Same page' is check in Safari preferences box).

  Note, I've sailed available Support of Mozilla and using about: config have reset browser.newtab.url so that the new tab appears empty (stop followed recent history for this purpose).

  Note, most importantly, I found this article of Support Forum, which, although written challenge, gave me a temporary solution:

    * https://support.mozilla.org/en-US/questions/891635
  

  (The temporary solution for the Mac OS is to command-click the icon 'Reload current page' in the url/address box in the browser toolbar, which opens a new tab in the same window).

  However, I would like to define this as a preference permanent and would ask someone give me a solution. Cheers, teacher

  LeProf_7272 wrote:

  if I can possibly just create a new config line
  

  You can't, that's why I suggested the modules above. There is no option in the user interface or preferably hidden in Firefox that can duplicate a tab whenever you open a new tab browser.newtab.url can only be set to a fixed address, what address is to be opened in the current tab.

  Are the only two built-in methods to duplicate a tab:

  1. Hold down the Option key and drag the tab to a new position on the tab bar.
  2. Hold down the command key and click the reload of the address bar.
  • Use mouse shortcuts to perform common tasks in Firefox

  You can make feature requests by filing development bug reports or by opening the Help menu by clicking on your comments.

  • https://developer.Mozilla.org/docs/Mozilla/QA/Bug_writing_guidelines
  • https://input.Mozilla.org

• How can I fix computer that does not start after the fan turns phase?

  I have a Compaq Presario SR5510F PC, Windows Vista Home Premium, AMD Athlon x 2. Lately, my computer is even worse at the start. When my computer starts, the fan should run for a few seconds, then it should stop and lead at the start with Compaq logo screen. But lately, the startup was completely terrible for my computer. Today, most of the time when I press the button in the box of the computer, the fan turns on and it continues to turn, and nothing comes on the screen. It isn't that rarely when the fan stops running, but then the monitor displays always upwards in white and VERY rarely when the startup screen appears, then it freezes on this screen. At this rate, my computer is totally useless when it does nothing but run his fan. This means that I can not go to boot options at all and go to the "last good configuration". What can I do to fix the computer when I can't have anything with her while she is empty?

  It sounds like a hardware problem, not a software problem.  If the computer rarely gets past the BIOS (material audit) stage of the startup sequence, then Windows is is not yet involved in the boot process again.  Request assistance from someone trained in the skills of troubleshooting hardware since this can become very expensive very quickly.

  "Maersk Custard" wrote in the new message: * e-mail address is removed from the privacy... *

  I have a Compaq Presario SR5510F PC, Windows Vista Home Premium, AMD Athlon x 2. Lately, my computer is even worse at the start. When my computer starts, the fan should run for a few seconds, then it should stop and lead at the start with Compaq logo screen. But lately, the startup was completely terrible for my computer. Today, most of the time when I press the button in the box of the computer, the fan turns on and it continues to turn, and nothing comes on the screen. It isn't that rarely when the fan stops running, but then the monitor displays always upwards in white and VERY rarely when the startup screen appears, then it freezes on this screen. At this rate, my computer is totally useless when it does nothing but run his fan. This means that I can not go to boot options at all and go to the "last good configuration". What can I do to fix the computer when I can't have anything with her while she is empty?

• Shared VMs fail to start when the computer reboots.

  I have a script that uses vmrun to suspend all VMs running when my Windows 8 Pro PC is shut down.  He paused the VMs correctly, however, the virtual machines shared that I set to auto-start does not auto-start.  I'm starting to wonder if I need to create a startup script similar to ensure that the departure of VMs correctly as well.

  This is the latest version of VMWare Workstation 9.0.1 build-894247.  Windows 8 regularly tells me that I have to reinstall VMWare Workstation to run.  Now, I did several times with no improvement.  Any help would be greatly appreciated.  I really want to try to migrate out of Hyper-V or an alternative of virtualation since I am always very happy with VMWare.

  Hi k4gdw,

  We recently found a problem that occurs when a host is upgraded from Windows 7 to Windows 8 while VMware Workstation is installed.  If this describes your situation, you can try to work around the problem if you are in a few registry changes on the host... (as always, be careful when you edit the registry!)

  (The instructions are for the 64 bit version of Windows. For 32 bit, it is similar, except that there is no key Wow6432Node.)

  1. open regedit (Start button + r, or search for apps for 'regedit')
  2. navigate in the tree to: HKEY_LOCAL_MACHINE > SOFTWARE > Wow6432Node > VMware, Inc. > VMware Workstation > volatile > IsFirstRun.
  3. right click on the key to IsFirstRun , and select Remove.

  Quit regedit.  Restart your host and VMs Autostart should then begin.

  Please let us know if that solves the problem for you!  We are preparing a Knowledge Base article and published a fix for future work stations.

  See you soon,.

  --

  Darius

• How to make documents in a book to start when the previous document remained

  Hello

  I have a book with a lot of long documents.

  I wish that each document to start where the previous document remained, there is no white space at the end of each document.

  Here's what I have-

  

  and what I want-

  

  You have any ideas on how to achieve this? (another as combining all my documents into a single )

  Thank you for your help and the idea!

  Christopher

  You cannot move text between documents in the book, the text block flows have put an end to the last page of a document of a book.

• In windows 7, how to make firefox automatically starts when the computer is turned on

  In Windows 7, how to make Firefox starts automatically when I turn on the computer. Note, I ask how to do this with Windows 7, xp, not vista.

  You place a shortcut to open Firefox in the start menu > programs > startup folder.
  
  It is essentially the same in all versions of Windows.

• How can I set a certain web page automatically start and open when I connect Windows?

  How can I set a certain web page automatically start and open when I connect Windows?  My company as a "Home Page" that I would like it to appear when I connect Windows.

  Hello.

  Yes, you can do it. The only way to do this is to create a startup items.

  STEP 1- Make sure that the home page is set correctly

  Second STEP- Creating a startup items

  How to create a startup items:

  1. Right click on the shortcut of browser (Internet Explorer, Mozilla Firefox, Google Chrome), then click on copy.
  2. Open the start menu, click all programs.
  3. Right click on the startup folder, click Explore.
  4. Right-click on an empty area of the Windows Explorer, click Paste shortcut.

  STEP 3- Restart the computer to apply the changes and see the effect

  Response to see if it helps.

• A DBA how to set permissions so that its users can submit to its form but do not have to execute queries or touch the database?

  Original title: InfoPath/SQL

  I am familiar with InfoPath, but I'm a DBA to a database on SQL server. The person created the infopath form and there users who can submit to the form, however, the only ones who can submit to the form are those who have access to SQL. A DBA how to set permissions so that its users can submit to its form, but do not have access to run queries or press my database. Thank you

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• How can I get my computer to automatically connect to the internet whenever I turn it on?

  Connect computer to internet automatically switch on

  How can I get my computer to automatically connect to the internet? Currently, I have to press Fn F1 to activate the WLAN - not something huge, but a tad boring. Another computer on the same network will connect automatically in setting in motion.

  It is a 'feature' of the particular computer you are using. Take a look at the manual; It may be a setting in the BIOS to turn on the wireless on startup.

• What file or a setting in the game engine automatically starts when you choose a plane, the engines are already started on the track.

  Microsoft Flight Simulator X

  What file or a setting in the game engine automatically starts when you choose a plane, the engines are already started on the track.

  Thank you

  Nick Satullo

  E-mail address is removed from the privacy *.

  Original title: Flight Simulator X

  Hi Nick,

  Please post your request in the Microsoft Flight Simulator forums and it would be better suited to the community of players for Windows. Please visit the link below to find a community that will provide the support you want for better assistance.

  http://support.Microsoft.com/GP/games-for-Windows

• How can I save text that I use regularly in the emails to avoid having to retype it every time?

  How can I save text that I use regularly in the emails to avoid having to retype it every time?

  Try this add-on: https://addons.mozilla.org/en-US/thunderbird/addon/clippings/

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html