How to set up the access point 1602 I just bought

Hello world

Hope you can help. I just bought an AIR-SAP1602I-A-K9 with an internet provider. With her, I also bought a power injector. I tried to use it as a standalone AP. It does not come with any instruction, and I'm not good at Wifi config. I hope you can help... My requirement of adjustment is very simple:

-Create and broadcast the SSID called MYCSL

N ' not no authentication or encryption. (is this open authentication?... so that people just plug the SSID as the user can start to cruise internet without putting in any key.)

-The access point does not have a static ip assigned, instead, he gets an IP from one of my dhcp server in the network.

-How to connect my laptop to configure via web http?

Can you tell me what should be configured? Although it is a new product from a legitimate retailer... Cisco said that they could not support it without any contract of Starnet... as a consumer... they should give the kind of grace period to support the new products... In any case, hope you can help me out here :)

I thank very you much for your help in advance.

Takami Chiro

Hi Takami,

Take a look at one of the previous announcement. I would be more similar. Hope this will help you keep started. If you are the kind of things anywhere you please come back the Forum and someone will be able to help you.

https://supportforums.Cisco.com/discussion/12217126/access-point-air-SAP...

Hope that helps.

Concerning

Najaf

Tags: Cisco Wireless

Similar Questions

  • How to set up the Windows network access program?

    original title: how to set up the N A P

    How to access my windows network access program

    Hi bryan stacy,.
     
    -Are you talking about in the center of network share or the network connection folder?
     
    If you are referring to the network connection folder, see the following link for more information:
  • Error message 'Please select the access point or wireless router to set up' when you set up a network

    Original title: set up a network.

    I want to create a wireless network for the games, and when I click on the network. A screen comes written on this "Choose the access point or wireless router to set up" and that "it might take 90 s for devices reconfigured to appear on your computer.

    But no device never appears below it, even after 90 minutes.
    Please help me with this.
    It was so easy in windows 7.

    Hi Manas,

    What is the brand and model of the Wireless Router/Access Point?

    Given that the issue has not persisted in Windows 7, there is a chance that the wireless router/Access Point is not compatible with Windows 8.

    Please check the links below on the implementation of a network.

    http://Windows.Microsoft.com/en-in/Windows-8/Setup-home-network

    http://Windows.Microsoft.com/en-in/Windows-8/what-you-need-Setup-home-network

    http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

    http://Windows.Microsoft.com/en-in/Windows-8/Add-device-or-PC-to-network

    Answer please if you have any questions.

  • How can I get my name from the access point?

    Since I bought a modem Arris 228 G and spent my 2 wireless, printers Canon WIFI unable to connect at Optimum!

    Canon said to contact my router creator (Apple Airport Extreme) for the name of the access point get return wireless, WI - FI printers.

    Help, please.

    W.W.

    (Mac Pro 10.6.8)

    The name of the access point is simply the name of the wireless network that provides AirPort Extreme.

    You can see the name of your wireless network by clicking on the WiFi icon at the top of the screen of your Mac and by checking that the name appears.

    There will be a check mark next to your wireless network name.. which is also known as a wireless access point.

    It would be the same name that you had before... unless you have changed some settings on the AirPort Extreme.

  • Monitoring of the Access Point

    Dear all,

    I have WCS and WLC with 90 LWAP Access Points. I joined the WCS and WLC and I am able to see all the LWAP in the GUI of WCS.

    The requirement is, when ever some LWAPs are down, I want to get an alert somehow to report it. Now, without knowing how to do it, I just saw the total quantity and if some LWAP is off, I find it difficult to find one that is broken.

    Can you please suggest me the appropriate method to get the solution

    RBK

    Hello rbk,.

    for simplicity, you can try to change the name of the access point to their specific locations. draw the map of the ap. Once they are in offline mode you will immediately see that ap is declining and where they are, first of all by the names of ap, then by their current location.

    It's better to do before setting the each AP. but still feasible if the AP is already set. you will have more work, however.

    have your floor plan ready with the exact locations of the AP. Note the mac address you set the AP once the ap registers with the controller, you can match with the floor plan and change the name of the access through its exact location point. example Bldg1-GF-AP01-lobby, Bldg1-GF-AP02-Hall, Bldg1-1F-AP01-reception... etc...

    import map in the WCS and assign the accordngly to the ap.

    You'll know exactly which ap is turned off and where exactly.

    hope this helps!

  • RV180W add the access point with itinerant support

    I have a client with a RV180w the latest firmware running.  We currently use the router as a router and provide wireless access.  We want to add a wireless coverage and I'm interested in our options.  We have a network unifying ethernet that we could use to give the new connectivity LAN AP.  Can buy us another RV180W and use it in AP mode and roaming wireless connectivity.  The customer wants a guest and business WLAN so we'll use the VLAN of the router.  How we set up the new AP?  Should we use WDS?   If we use WDS, can we still use WPA2?  Thank you for your help.

    Hello, Mr. Carl,.

    Yes is possible to use WDS and WPA2 at the same time.

    The master of accreditation will be setup as a RADIUS server to authenticate the other access points, while clients use the WPA2-PSK, which occupies the same on each access point.

    Let me share with you the information found on WDS and the configuration of basic, found on the guide me section.

    WDS configuration:

    http://sbkb.Cisco.com/CiscoSB/UKP.aspx?VW=1&docid=ea8660ccb0cf4ae99cebfafd4303cdc1_WDS_Configuration_on_RV180W.XML&PID=4&FCID=&fpid=&slnid=13

    RV180W configuration:

    http://sbkb.Cisco.com/CiscoSB/UKP.aspx?VW=1&docid=dd5990ef4ad947ae89da5c3e0b8bd985_Wireless_Configuration_on_RV180W.XML&PID=4&FCID=&fpid=&slnid=4

    If this answer is satisfactory to you, please mark it as response.

    Diego Rodriguez

    Cisco network engineer

    Thank you

  • where can I get advice on how to set up the iPad for a partially sighted person

    Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

    Paul,

    Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  • printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

    printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

    Hello

    You can find out how to access and change the settings of quality below:

    http://support.HP.com/us-en/document/c01662356

    Kind regards

    Shlomi

  • Mobile data does not and the name of the Access Point settings are not available

    I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.

    I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.

    There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says

    "Access Point name settings are not available for this user.

    Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?

    Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help

    This text is a bit misleading, which is something that I have forwarded internally as your comments.

    If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.

    Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.

  • How to set up the order of priority of a start-up program

    Hello

    I'm using Pavilion laptop dv7-2110, Windows Vista 64 bit PC.

    Can someone explain to me how to set up the order of priority of a startup programs.

    Problem: Kaspersky Internet Security appeaps on the taskbar after Skype Torrent etc.

    Thank you in advance.

    You can access the start utility by typing "msconfig" in the start menu-> "search programs and files". From there, go to the Startup tab and you can select the programs to start and which not.

    Regarding the priority, I don't think there is a way, anyway you shouldn't be worried that your anti-virus starts just after other programs that it does not put you in danger.

    If you wish for a quick start you should probably disable most of the non-critical programs in the list, don't worry you do not break your computer if you uncheck anything that you don't know what it is, but I recommend that you don't have before checking what it is.

    Hope this helps

  • Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

    My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

    I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

    I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

    I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

    I need step by step instructions on this Yes please treat me like a fool!

    Thank you

    Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

    After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

  • C4780 wireless printer cannot find the access point

    I have c4780 wireless printer.  It will print fine using the usb connection, but has never printed wireless.

    PC operating system is Windows Vista.  Wireless router is the linksys WRT54G.  The printer does not see the access point.  The security mode of the router is WPA Personal.  I have a unique SSID.  ISP is Timewarner Roadrunner.

    How do I get this to a wireless connection?

    Try this firmware update.

    In addition, sweat you are broadcasting your SSID and not using MAC filtering.

  • ACS 5.2 How to set up the local user lockout policy?

    Hi all!

    IM faced with Discover how to set up the local user to the point account lockout policy 5.2 ACS.

    4.2.1 there is the option "failed attempts to go beyond", see link for more details:

    http://www.ciscosystems.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/User_Guide/UsrMgt.html#wp273167

    But to the point 5.2 I can't find the option:

    http://www.Cisco.com/en/us/customer/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/acsuserguide.html

    Can somebody spread some light where I configure this?

    BR /Crille

    Just found a bug number indicating it is not supported.

    CSCth12406 Details of bug
    ACS 5 has no option to disable a local account on the unsuccessful attempts
    Symptom:
    ACS 5 doesn't have an option to disable the local account in the internal identity on failed attempts store

    Conditions:
    When ACS 5 is used to only to authenticate users using internal identity store, there is no way to configure a strategy of locking of account for failed attempts.

    Workaround solution:
    Currently there is no work around

  • How to set up the password disk HARD on Equimum L40-141?

    Hello

    Can someone tell me how to set up the hard drive on my laptop password above please?

    Thank you
    Jane

    Hello

    Have you checked the settings in the BIOS?
    My BIOS contains an option for the HARD drive password parameter.

    But just a question; Why do you want to set the HARD drive password?
    Is this really necessary?

    You need to know if the HARD drive has been fixed, and that something will go wrong, I mean that if you would forget the HARD drive password, the HARD drive would be locked and is no longer usable.
    So be careful with this password if you want to know my opinion; Don t pay.

    Welcome them

  • Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?

    Good evening
    I have a toshiba qosmio f60, I read your answer about tv tuner.
    My question is: how to set up the tv with integrated antenna tuner? Thank you

    The tuner is already configured!
    You must use Windows Media Center.
    Here, you have to choose the tuner and need to look for available DVB - T channels.

    Notes; Signals DVB - T depends on the country and region.
    In my area I needed an external antenna because the signal is too weak.

Maybe you are looking for

  • Home page rebuild is letters only and not photos - why?

    I don't remember what I changed, but when I select the homepage of the BBC, it shows now that the word printed and not the photos he used to do before.

  • Satellite A50: How to use a 1440 x 900 on external monitor?

    I have connected a 1440 x 900 LCD monitor to my satellite A50. Unfortunately the graphics card does not support this wide screen resolution. I tried to download the latest driver for the card intel 82852/82855 chart to:http://downloadfinder.Intel.com

  • VIZIO Smart TV with built-in Skype App receives "orange badges", but other Skype applications show nothing...

    Hello First off I apologize for opening a new thread if this has been discussed before... As I am a noobie on this interesting platform... lol Now I just installed Windows for the desktop app and have Windows 8 MS (appstore) and also have Windows Pho

  • How sync two 9237 units?

    Hello I am writing an application in c# .NET using the DAQMX library, and I have 8 strain gauges, that I need to measure using two NI 9237 units connected by USB to my computer. The problem that that I am facing is that the timestamps of the samples

  • Problem printer since recent updates.

    I can print, but cannot enter the tab "Properties" to change settings such as a 'project' or only in black and white printing.  This has happened since the last updates.  My printer is a HP Deskjet #F4140 all-in-one.  Thanks for your help.  Diane