How to set up the domain user to log on automatically immediately after starting?

Similar Questions

• ACS 5.2 How to set up the local user lockout policy?

  Hi all!

  IM faced with Discover how to set up the local user to the point account lockout policy 5.2 ACS.

  4.2.1 there is the option "failed attempts to go beyond", see link for more details:

  http://www.ciscosystems.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/User_Guide/UsrMgt.html#wp273167

  But to the point 5.2 I can't find the option:

  http://www.Cisco.com/en/us/customer/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/acsuserguide.html

  Can somebody spread some light where I configure this?

  BR /Crille

  Just found a bug number indicating it is not supported.

  CSCth12406 Details of bug

  ACS 5 has no option to disable a local account on the unsuccessful attempts

  Symptom: ACS 5 doesn't have an option to disable the local account in the internal identity on failed attempts store Conditions: When ACS 5 is used to only to authenticate users using internal identity store, there is no way to configure a strategy of locking of account for failed attempts. Workaround solution: Currently there is no work around

• How can I keep the workstation user interface log after the closure of the workstation?

  Hello

  On a Windows host, the newspaper of the UI for desktop is called vmware - < user name > - < PID > .log and is stored in the user's TEMP directory. Now, I got a problem that occurs during the closing of the workstation. I want to check the log to see what's happening, but the user interface log is deleted automatically after the closure of the workstation.

  Is there a way to tell the workstation no do not remove the log of the user interface? Thank you.

  Well, can you try this?

  %AppData%\VMware\config.ini to edit and add:

  UI.log.FileName = "C:\some\path\to\logfile\vmui.log".
  UI.log.Keep = 'TRUE '.

• How to give administrative rights for the domain users (user is outside organization).

  Hello

  How to give administrative rights for the domain users (user is outside organization).

  If the employee works in the company of xxxx but it supports the client project and is located on the place of the customer, but it does not use the client computer and not on the client domain as well, but the employee is in the company of xxxx must be given administrative rights to the computer. can someone help me on this ASAP.

  Thank you

  MURUGESAN Rudy,

  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  

• WMIC command fails for the domain user

  Hi all

  I use windows 7 and testing commands wmic as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  Most of the time control fails with RPC server unavailable to users in the domain (default of 75%). Working sometimes and mostly failing to time.

  Error code

  0x800706BA-online the RPC server is unavailable.

  If I use the local user, she is successful, command below still works (100% success)

  WMIC/node: "Computer1" / User: 'Nom_ordinateur\Nom_utilisateur' / Password: 'password' PROCESS CALL Create "calc.exe"

  I have two computers running windows 7, the firewall is disabled

  Executing command from computer2 as below

  WMIC/node: "Computer1" / User: "domain\username" / Password: "password" PROCESS CALL Create "calc.exe"

  1 computer settings

  1. Adds the domain under group administrator user
  2. Configure dcom through DCOMCNFG.exe and got all rights to domain user

  (DCOM remote launch and activation permissions for a user, the remote DCOM access permissions)

  1. Rights granted to wmi namespace (root, cimv2) of domain user using wmimgmt.msc (all rights to the namespace namespace and sub)
  2. Firewall settins according to the - http://msdn.microsoft.com/en-us/library/aa822854%28v=vs.85%29.aspx

  Note: The firewall is disabled

  1. UAC disabled
  2. Check rpcss and associated to the computer and all services are running

  What could be the reason of failure for the domain user (work awhile and is Server Unavailable RPC over time). Tried to restart that wmic user system and field control did not exist, after awhile like 30-45 minutes user field the wmic commands work and default again. How to solve this problem (such as checking the logs)?

  Thank you

  Mani

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en/winserverDS

  It will be useful.

• Why my firewall only use the domain user name and password for login and enable passwords, not a different password enable as do it my switches? RADIUS config looks the same...

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  Question:

  Firewalls Cisco requires that one level of password, i.e. the domain user name and password are used for logging as that to reach the global configuration mode.

  Background:

  We have several network devices Cisco, put in place who authenticate to our Windows using NPS (Windows 2008 R2) DC. Switches we have implemented the function exactly as we would wish that they need your domain user name and password to connect to the device. Then they require a separate password when you use the enable command, it is stored in Active Directory:

  Switches:

  User name:domain-username

  Password:password-field

  SWITCH >Activate

  Password:Enable-password - to-Active Directory

  SWITCH #.

  Firewalls (as they are now):

  User name:domain-username

  Password:password-field

  Firewall >enable

  Password:password-field

  FIREWALL #.

  With the firewall, however, they require your domain user name and password first and then your domain password again when you use the enable command. I want to reuse the firewall to use the level that currently switches enable password rather than the password of domain. The appearance of the current configuration as follows:

  Current configuration of the switch:

  AAA new-model

  AAA authentication login default local radius group

  AAA authentication enable default group enable RADIUS

  AAA authorization exec default local radius group

  AAA - the id of the joint session

  ACCT-port of 1645 auth-port host 192.168.0.1 Server RADIUS 1646

  Server RADIUS ports source-1645-1646

  RADIUS server key 7 1234abcd

  Current configuration of the firewall:

  RADIUS protocol AAA-server DC01

  AAA-server DC01 (outside) host 192.168.0.1

  authentication AAA ssh console LOCAL DC01

  Console to enable AAA authentication LOCAL DC01

  1234abcd keys

  Any help would be great, thanks!

  You must use GANYMEDE + instead of RADIUS for this.

  Here, you can use command sets in the results section of the policy.

• How can I reset the administrator user accounts?

  My Windows 7 PC is now standard user. How I can change standard user to administrator. The system won't let me change.  How can I reset the administrator user accounts?  Or, how you're going to help me change the setting?

  If you have AN administrator account on your computer then the answer of Joel help at all.

  You cannot change a user account Standard on an admin on another account Admin account (AFAIK)

  Try this:

  Boot from your Windows repair disk (you DID make a?) and use system restore to set Windows to a point before it happened.

• How to set up a second user

  Original title:

  Beginning uop

  How can I set up my new laptop without using my email and password or how to set up a second user?

  Hello

  8.1 Windows and Windows RT 8.1, that you have created a standard, an administrator or the child's account, you can also choose one of the following two ways to connect:

  • With a Microsoft (an e-mail address and password) account. Signature with an e-mail address and password allows you to use your favorite applications and your unique settings and preferences on any PC.

  • With a local account. Signature with a local account (with or without password) allows you to use the files, settings, and applications on your local computer only.

  If you are an administrator, you can easily add accounts of users through laptop settings. For instructions, see creating a user account.

  You can see the following link for details on the user account.

  User accounts: frequently asked questions

  It will be useful. Please let us know if you need help on this issue or any problem related to Windows.

• How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal.

  How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal. I am a novice. Thank you very much.

  1. Please select from the menu bar Terminal

  ▹ terminal preferences... ▹ Profiles ▹ Shell

  If the run command box is checked, uncheck it or enter the command to run automatically (if any), each opening of a Terminal window. Note: this is not how you define a default shell.

  2. If step 1 does not resolve the problem, see below.

  Back up all data.

  Select

  New Shell command ▹

  in the Terminal menu bar. Uncheck the box marked

  Run the command inside a shell

  If it is enabled.

  Copy and paste the following line into the text box that appears, and then press return:

  /bin/mkdir disabled_shell_files

  Close the Terminal window that opens. Repeat with this line:

  /bin/mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files

  History Shell and former initialization files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It is normal that some of these files do not exist, and therefore, you will get error "no file".

  Close the window and open a new test.

  You may already know that files with name starting in '. ' are not visible in the Finder by default. So, if you open the folder that you created in the Finder, it will appear as empty, even if it is not. If you need to recover a portion of the data in the files of the shell, use a shell such as nano-based text editor (1). Make sure that you're not recreating the problem. Otherwise, you can delete the folder.

• How to set up the password disk HARD on Equimum L40-141?

  Hello

  Can someone tell me how to set up the hard drive on my laptop password above please?

  Thank you
  Jane

  Hello

  Have you checked the settings in the BIOS?
  My BIOS contains an option for the HARD drive password parameter.

  But just a question; Why do you want to set the HARD drive password?
  Is this really necessary?

  You need to know if the HARD drive has been fixed, and that something will go wrong, I mean that if you would forget the HARD drive password, the HARD drive would be locked and is no longer usable.
  So be careful with this password if you want to know my opinion; Don t pay.

  Welcome them

• Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?

  Good evening
  I have a toshiba qosmio f60, I read your answer about tv tuner.
  My question is: how to set up the tv with integrated antenna tuner? Thank you

  The tuner is already configured!
  You must use Windows Media Center.
  Here, you have to choose the tuner and need to look for available DVB - T channels.

  Notes; Signals DVB - T depends on the country and region.
  In my area I needed an external antenna because the signal is too weak.

• How to set on the Sony NEX-6 automatic exposure bracketing

  How to set on the Sony NEX-6 automatic exposure bracketing

  Hi FotoEdge,

  You can adjust the automatic exposure of the support under Menu section. Instructions and information on this option is referred to in the #58 manual page.

• How to set up the multimedia keys (only the last 3 buttons)

  Hello

  How to set up the multimedia keys (only the last 3 buttons)? The first button works, you open the browser and the other open WMP.
  But the last 3 buttons (play/pause, Stop, forw/rewd) aren´t work with WMP. How can I fix?

  Thank you

  Hello

  Can you please tell us what model of laptop Satellite A do you have?

• Qosmio F50 - 10Z - how to set up the bar multimedia?

  Greetings, have a question... because after a long time, trying to make it work, I can not find the problem...

  On my laptop, I reinstall Windows Vista, download all the drivers for the Toshiba for Qosmio F50 driver page, for Vista... and even how to set up the multimedia bar? With Dolby, sound on / off, light power... He s doesn't work do not. Are there special software required? Or can I put it somewhere?

  Thanks for help

  Use this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU research of Value Added Package 1.1.19