How to set up WRT120N as a customer

Similar Questions

• How to set up WRT120N

  Hello. I have the following problem. I use a static IP address and I use router wrt120n, but to connect to the internet, I plugged the internet cable in the 1,2,3,4 (any) slot. So now I use the part wireless router without "shaping" if I can afford. When I put the internet cable into the slot in the Internet from the router, the laptop can simply connect to the internet - it shows an unidentified without access to the Internet network. I don't know what kind of changes I need to make in the WEB interface of the router. I think I set the type of the connection - now is DHCP and may be putting my IP address, DNS, SubnetMask in the router configuration, but do not know exactly how. I tried to configure the router with the CD interface but it's same - network not identified when the cable is plugged into the port (yellow) Internet. How to configure the router to a router, and not only a wireless switch?

  Looks like the question is weird. If you connect directly to the modem, you can access the internet?

  On the Device Manager, click view on the top. Select to see the hidden device. That should show you something, here.

• How to set the primary file in custom filter UCM

  Hi all

  I have a requirement where I need to change the primary file that is downloaded.

  I use validateStandard filter and above the file gets checked... I want to change the primary file for some another file...

  But the problem is that I don't get what function I can set the value for the metadata of the primary file.

  Here is my code:

  public int doFilter (workspace ws, linking DataBinder, ExecutionContext cxt) survey DataException, ServiceException
  {
  Report.trace ("IMG_COMPRESS", "Start doFilter", null);
  
  String xcontentType = binder.getLocal ("xContentType");
  String primaryFilePath = binder.getLocal("primaryFile:path");
  String primaryFileName = binder.getLocal ("primaryFile");
  
  If (xcontentType.Equals ("CTID24"))
  {
  Report.trace ("IMG_COMPRESS", "Original file path:" + primaryFilePath, null);
  Report.trace ("IMG_COMPRESS", "file name:" + primaryFileName, null);
  
  Try
  {
  The output if the primaryFile:path are missing
  If (primaryFilePath == null | primaryFilePath.trim () .length () < 1)
  {
  Report.trace ("IMG_COMPRESS", "Could not find the primary file path", null);
  Back to CONTINUE;
  }
  
  Change the original image (input image) to the compressed Image (output image file)
  primaryFilePath = "E:\\ImgCompression";
  primaryFileName = "compressed.jpg.txt";
  
  binder.putLocal ("primaryFile:path", primaryFilePath + "\" + primaryFileName);
  binder.addFile (primaryFilePath + "\" + primaryFileName);
  
  Report.trace ("IMG_COMPRESS", "new Img path:" + primaryFilePath, null);
  Report.trace ("IMG_COMPRESS", "new Image Name:" + primaryFileName, null);
  }
  catch (System.Exception e)
  {
  Report.trace ("IMG_COMPRESS", "Unable to read file", null);
  }
  }
  executed properly, filter return CONTINUE
  Report.trace ("IMG_COMPRESS", "End doFilter", null);
  
  Return FilterImplementor.CONTINUE;
  }

  There is no function with addFile in the DataBinder class.

  Help, please

  As I understand it, you create your own compression via a custom filter and you want to replace the original file with this compression.

  That being said, why not do exactly as that - the original file is placed in some ~ temp directory on the server (after download), so go ahead, create compression and put it instead of the original file. One thing to consider is the MIME type - if replacing it, it should be the same; If it is not that you had to adjust first some metadata.

• How to set a password that is customized for the linux model

  Hi, I tried to put a personal password for the model of linux but every time I deploy the model of linux, that the password is always regenerated by VCD;

  Pls advise

  Hi, can you confirm that you have managed to put the rest of the options mentioned Tim?

  You should see the option, if you enter the vApp and right-click on the virtual machine, you are trying to reconfigure? See the attached capture screen...

• How to set the password on the body of the e-mail in custom e-mail template

  HY,
  I have a model of personalized message in the definition of e-mail > Console Design.
  I send this "Email Template" with the user password, but I do not know how to set the variable "password" in the body of the e-mail.
  I searched Varables > objectives > Variables, but I have not found any variable think as password.
  
  Some have an idea about this? How to set the password on the body of the email?
  
  Kind regards
  PIZA

  You can use a custom Java code. See the following:

  Notification by e-mail to the users after that they change their password from IOM

• How to set up custom B2B queues

  Hi gurus B2B.
  Could someone tell us how to configure queues coustom in B2B
  1. I created a QA B2B, database using scripts, could someone tell us how to set up these B2B. Would you please elobrate step by step
  
  2. in 10 G, document Protocol parametrs we have sender id Exchange ID receiver, sender Id and group ID receiver, but these parameters, I'm not able to find in 11 G...
  
  Concerning
  Chichi

  Francis wrote:
  Outbound:
  We need to configure outgoing queues (host PT---> channels--->... must select INTERNAM.) Administration of GOLD---> Listening channels---> must choose INTERNAL)-please let me know where I need to configure outgoing

  Bound:_ this channel where you want the B2B to pick up messages and send remote TP.
  This must be configured via AdminServer-> Listening channels-> configure your channel listen and tick 'Internal' to true.

  On arrival:

  In the same way where we configure the incoming lines (TP2_IN_QUEUE, TP3_IN_QUEUE, TP1_IN_Queue, TP4_IN_QUEUE).

  Inbound:_ what I understand, after processing received messages from TP remotely, you want B2B to transmit messages to this channel.
  To do -.
  1. you must configure the channel partners-host-> channels >-> configure the channels here and make sure the * "Internal" * property is set to true in the attributes of the channel.
  2. in the inbound agreement, use the channel using the drop down box under the host found in the lower left corner.

  Thank you
  Varun

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to set the voltage on a 3.3 volt NI 9237 module?

  Hello

  How to set the voltage on a 3.3 volt NI 9237 module?

  The voltage is now at 2.5 volts.

  This is my first time with this camera.

  This set of MAX or are there jumpers?

  I want the value of the excitation voltage at 3.3 Volts and do not change.

  The NI 9237 is a NEITHER cDAQ-9172.

  Thank you

  Bill

  Hi POBA,.

  This can be set to your programming environment.  For example, LabVIEW Signal Express, a task of MAX, or a DLL call in a text-based environment.  You want to create a strain, tension Custom with excitement, or any bridge based task in any environment.

  "" "In MAX, right-click on your device and choose create a task" acquire signals "analog input"...

  "" "In LabVIEW, place a DAQ Assistant" acquire signals "analog input"...

  "" "In Signal Express, add a step for Acquire" DAQmx Acquire"analog input"...

  In any C language based, you will want to call a function such as: DAQmxCreateAIVoltageChanWithExcit, DAQmxCreateAIStrainGageChan, DAQmxCreateAIBridgeChan

  You can then specify the Source of Exictation to be internal to 3.3V.

  Best,

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to set the time stamp for incoming mail?

  How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

  Thank you
  Laura
  2.13.2012

  If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

  If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
  https://account.live.com/EditProf.aspx
  and change the time zones for the good...

  Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

  Noel

• How to set the path of soruce within the IDE?

  Hi all

  It is a question for the source path setting.

  my building project looks like:

  CBC

  com-

  myPath-

  App.HPP

  App.cpp

  When I create a new source of money the mypath and include it with app.hpp.

  She always wake a reference kept while making the construction project...

  If I move them to the same folder as app.hpp, everything works fine.

  I checked the project properties and add include the source, but there is no difference.

  How to set my source path?

  Thank you.

  In your {appname} .pro, update the following lines:

  SOURCES += ../src/*.cpp
  HEADERS += ../src/*.hpp ../src/*.h
  

  and add your custom paths:

  SOURCES += ../src/*.cpp ../src/com/mypath/*.cpp
  HEADERS += ../src/*.hpp ../src/*.h ../src/com/mypath/*.hpp ../src/com/mypath/*.h
  

• How to set a label/text for an ImageButton control?

  Hi guys,.

  ImageButton allows you to set the background for three different States images: defaultImage, pressedImage and disabledImage. But how to define the label for her? I want an ImageButton Label with three different background images.

  Help, please

  Thank you

  Hello

  Create a custom using DockLayout button. Is there a code example in this thread:

  http://supportforums.BlackBerry.com/T5/Cascades-development/how-to-set-click-event-into-custom-Butto...

  Place it in a separate qml file, for example CustomButton.qml.

  Then, it can be used like this:

  CustomButton {... properties...}

• ACS 5.2 How to set up the local user lockout policy?

  Hi all!

  IM faced with Discover how to set up the local user to the point account lockout policy 5.2 ACS.

  4.2.1 there is the option "failed attempts to go beyond", see link for more details:

  http://www.ciscosystems.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/User_Guide/UsrMgt.html#wp273167

  But to the point 5.2 I can't find the option:

  http://www.Cisco.com/en/us/customer/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/acsuserguide.html

  Can somebody spread some light where I configure this?

  BR /Crille

  Just found a bug number indicating it is not supported.

  CSCth12406 Details of bug

  ACS 5 has no option to disable a local account on the unsuccessful attempts

  Symptom: ACS 5 doesn't have an option to disable the local account in the internal identity on failed attempts store Conditions: When ACS 5 is used to only to authenticate users using internal identity store, there is no way to configure a strategy of locking of account for failed attempts. Workaround solution: Currently there is no work around

• BlackBerry smartphone how to set up POP Mail

  I have a new Bold 9700. I'm new to the blackberry and for the life of me I don't see how to set up POP mail or internet access through my 3 G connection. all my other phones, I had in the past, when I incerted my social insurance card, I would get 3 SMS and all I had to do was save them and my internet was put in place. but my Blackberry has never these messeges. is it possible to set up my access to 3 G Internet and my POP mail? all I can find is an option to set up an Enterprise Server, and I don't have another option that all the books say I should have? any help anyone can offer woud be great. Thank you in advance.

  AA7KN wrote:

  Thanks for the info. you're right, I probably have a Blackberry account through my provider of the support cell. I didn't know this until I bought this phone. I love on the phone, except that I wish RiM would have included courier pop and internet through the cellular provider without the need to have a special account. It's expensive and with the extra cost, I don't want to activate the account. Thanks again for the info.

  AA7KN

  Hello

  It is unfortunate that you did not know this before purchase... a pity indeed. But, be aware that BB provides some unique items that are for the customer BB companies don't. For example, carriers must install and maintain a unique infrastructure that is only for their BB customers. As a result, they may charge extra for these services. It is regrettable that they have not revealed these facts you advance... oh, it's the companies that control the price... no RIM.

  Good luck!

• How to set a field in a form of DML to only display?

  It seems that it would be obvious, but I can't figure out how to set a field in a DML form read-only.  Thanks for all the ideas.

  The most obvious thing is to define the type of item to display only. Save Session State to Yes if the value of the item is required in after not submit treatment or if the value is only for display on the page.

  Alternatively, if you want the element to appear as a normal text control, but do not be modifiable, set the item text field and the custom attributes type to readonly .