How to show the BLOB (file pdf, image) as pop up when you click on a link

Similar Questions

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• How to open 2 sites on start and 1 Web site when you click the home button?

  How to open 2 sites on start and 1 Web site when you click the home button?

  You can change your shortcut on the desktop Firefox with two starting URLS. To try:

  • Shortcut on the desktop: right-click on the icon, choose Properties
  • Icon taskbar pinned: clic click right on the icon, right click in Mozilla Firefox, click on properties

  Windows normally selects the shortcut tab. If this is not the case, go ahead and click on the shortcut tab.

  You will see the target highlighted. On 64-bit Windows, which is usually either not less the following:

  "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
  

  For the specific shortcut launch pages, you can add them to the end, for example:

  "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -url "http://www.dilbert.com/" -url "http://www.gocomics.com/pearlsbeforeswine"

  After OK'ing the Properties dialog box, you can test everything right now to confirm that Firefox is now launching a window with tabs. Either:

  • Double-click the shortcut on the desktop
  • right click on taskbar icon pinned, click Mozilla Firefox

  Who do you want?

• In Windows Explorer. A dated file say 12/02/2000. When you click the folder, the files in the folder bear different date. Why is it so.

  ORIGINAL TITLE: I use Windows xp.

  I use Windows xp. In Windows Explorer. A dated file say 12/02/2000. When you click the folder, the files in the folder bear different date. Why is it so. To update the files, we should see the dates of the files instead of the dates of the folder. right? Why is there such a difference?

  My copy of Windows XP works the same as yours.  Apparently the date folder is not updated when the content is, that fact make some sense as the folder itself is not updated when new content is created in the it.

• When you click on a link to a PDF file on a Web page I want to read = =, no backup

  Since I installed the latest version of the player on my Windows 7 PC, when I click on a link to a PDF file in a Web page I immediately get a save as dialogue box.   The behavior of earlier versions of the player was to open the PDF for on-screen reading.  How to restore this behavior?  I don't see in the preferences (Ctrl-K).  Browser is Firefox last.  Thanks - Dave

  Hi DaveMcKeen,

  Please refer to this article:- display PDF in browser Adobe Acrobat DC, Acrobat Reader DC

  Kind regards

  Christian

• How to enlarge the parts of a circle of get - have text pops up when you click on it?

  I'm working on an interactive infographic in edge animate CC. I use pieces of a circle and when you click on / hovered, I want the pieces to grow and also have the text pop up on the side. I am struggling with how to animate my circle pieces so that they move and are clickable. Can someone offers directions?

  I made a sample for you, but not using EC.  This used boxes, images and a text field which is change according to the box that is clicked. I hope this helps.

  PNG and info.zip - Box

• How can I make an invisible button that toggles an icon when you click it?

  I am extremely new to Acrobat and Javascript overall, so I'm a little lost. I work with a form that requires that I do several buttons from rocking of the images/formatting in an existing pdf. What javascript would be appropriate for an 'invisible' borderless button or no fill color, in order to define an icon in there when you click on it and remove this icon when you click it again, with the ability to switch back constantly? Thank you very much!

  Mark III

  There are a number of ways to do this. If you want everything to be autonomous within a single button, you can configure the behavior of 'Push' button and set the icon the mouse down on the non-empty icon and flipping to the icon of the Virgin. You can then place the following code in the mouse event to the top of the button:

  Script mouse upward to a button

  (function () {}

  Get a reference to this button

  var f = event.target;

  Get the current property of the submitName

  var NS = f.submitName;

  Toggle submitName property

  f.submitName = sn = "" | SN = 'false '? "true": "false";

  Set the icon on the Down or reversal icon (empty) defined for this button

  var oIcon = f.submitName = "true"? f.buttonGetIcon (1): f.buttonGetIcon (2);

  f.buttonSetIcon (oIcon);

  })();

  This code co-opt little used field submitName property to track the State of the button. (It won't be a problem for the buttons, even if the form is put in place to present it as 'HTML', which is the only time where this property is used.) It extracted the icon below or on the icon to use for the icon overview.

  If you don't like that behavior, you can use a button hidden and implemented in the same way, companion setting icon upwards on the non-empty icon and the icon down empty. The key code can then be something like:

  (function () {}

  var f = event.target;

  var F2 = getField ("b2a");  Get a reference to the other button

  var NS = f.submitName;

  f.submitName = sn = "" | SN = 'false '? "true": "false";

  var oIcon = f.submitName = "true"? F2.buttonGetIcon (0): f2.buttonGetIcon (1);

  f.buttonSetIcon (oIcon);

  })();

  In this way, that you don't have to limit a parameter of behavior of Push button.

• Disable the feature of switching to tab, when you click on a link

  When I click on certain links particularly in gmail, for example, if I get an email from youtube of a video being downloaded and I click on the video says, firefox opens this link in a new tab, but the problem is that it will automatically switch to this tab that I hate. This happens with the other links that want to open in a new tab for.

  Switch to tab not more or go to the black list of the tab doesn't work. I got a fix for it in the comments: config page, but I've recently refreshed firefox and it removed the feature. preference, I don't want to use a plugin to solve this problem

  (edited for clarity - c title)

  Sorry, I'm distracted by the title of the question.

  You can check the tab bar setting in Options/Preferences > tabs.

  • [] "When I open a link in a new tab, switch to it immediately."

  There are three prefs, accessible via the comments: page of config, to control the development, if you click on a link.

  • browser.tabs.loadInBackground (normal links)
  • browser.tabs.loadDivertedInBackground (javascript)
  • browser.tabs.loadBookmarksInBackground (bookmarks)

• ADF necessary validation is triggered when you click on ANY link off the page

  I have a couple of fields of text on a page and I put the validation 'Real' = required on them so that when I click on a button that calls a pageflow validation method is device when there is no data in the field.
  
  The problem is that it is also device when I click on any other button navigation or link off the page. Is it possible that I can do the required validation related only to a particular button?
  
  
  In addition, this jsff belongs to a taskflow which is deployed in Webcenter spaces so some think that the reason that has something to do with it.
  
  Any help is appreciated.

  Hello
  Make the other buttons property immediate = "true", then he ignores all validation on the client side.

  For example:-If you want to do validation on the first button's click, but you don't want to do any validation on the second button's click, then place the immediate property = "true" on the second button and you're done.

• How to stop the computer to ask what program to use when you try to run a file ".exe"?

  Whenever I select a program runs it prompts me to choose what program should I use to run the program.  He acts like he can not find the "ini" file which allows to go along with the program.  The "ini" file usually defines the settings for the program works.  It sets up the lanes for the necessary files can be found.  How my computer is, he cannot understand the program that wants to be run because the definitions are not defined.  What can I do to fix this broken configuration? All this began after I got rid of a bunch of malicious programs.

  It seems that your .exe file associations have been lost.  To restore file associations, perform the procedure in the following site specific associations to exe.  Make sure to read the Special Summit as note specifically relates to lost .exe associations:

  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• How to change the image of a line when you click on it from the waterfall cookbook sample application

  Hi, I have a few sql data. And I'm showing them with qlistdatamodel. I used the ListItemProvider and implementing customControl for each line in the sample application cascade cookbook. Which can be found in here. I want to change an image of the line when it is selected. I modified the method 'select' of 'recipeItem.cpp'

  void RecipeItem::select(bool select)
  {
    // When an item is selected, show the colored highlight Container
    if (select)
    {
  
        mHighlighContainer->setOpacity(0.9f);
        mItemImage->setImage(Image(QString("app/native/assets/btn_a.png")));
  
    }
    else
    {
      mHighlighContainer->setOpacity(0.0f);
  
    }
  }
  

  It should have changed the image btn_a.png. But what it does is removes the image and the text remains. Thank you.

  I just found out another of my post that my uri of the image is incorrect. The format of the url I was using was valid only in a Beta SDK. It should be like "asset:///btn_a.png". Now it works perfectly

• Problems to show the driver IVI and property loader error messages when you use a type of operator interface

  I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

  Hello, Johann,.

  I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

  concerning

  Samuel

• Upgrade to Windows 10 and Acrobat Reader DC. A PDF file is not open when you click on a link or a web application.

  Some sites will detail «Can can't Open PDF»

  I am also unable to print postage for mailings of eBay. I have to click to save and print.

  Hello

  Could you please explain the workflow, what exactly happens when you try to launch a PDF file?

  You can go through the following link and check if this solves the problem.

  Unable to display Adobe PDF on the web

  Concerning

  Sukrit diallo

• Forcing a file DOWNLOAD vs open a file when you click on a link... What is the best way to do it?

  Hi all

  What is the best way to ensure that when a user clicks a download link on a web page that the file is actually downloaded rather than the file open in any program can read? For my case, this includes two types of files, video files (.wmv, mainly) and .pdf files. I want my users to browse I provide for them, then they choose a link, click and the file downloads, NOT to have them play/open.

  I started researching on this last night, and the best I could come up with was the suggestion to add "& action = 3Dsave" file as a query string name. So, me being curious, I tried without success to find out whether A) the right way to do it or B) If this query string is the code appropriate to today's standards.

  I looked on the Web site of w3c.org not knowing if it was something that was of their Kingdom, but their website has been revamped and is now so cinfusing to navigate that one must become a software engineer to understand.

  Any help on this would be most appreciated. Thank you!

  Sincerely,

  wordman

  Create a file with the same name as the video/pdf file but with the extension .php. Insert the following code at the beginning (NO space before that in the file):

  <>

  Header ('Content-disposition: attachment; filename = yourfilename.xyz');

  Header ('Content-type: abc');

  ReadFile ('sourcefilename.xyz');

  ?>

  Replace with the file name to "yourfilename" above. sourceFileName may be the same. This gives you just the ability to change names.

  You can find a list of the types mime here: http://en.wikipedia.org/wiki/Mime_type

  If you know php, you have a lot of files, it would probably be easier to have all the links go on one page with the filename and mime type as parameters. You would then use the simple substitution to do the rest.

• BSOD and the only file that appears is ntkrnlpa.exe when you play Metal Gear Rising

  So it's a bit complicated to explain especially because I downloaded Bluescreenview and the only file that appears is ntkrnlpa.exe and happens when I play Metal Gear Rising statement, which is a CPU intensive game, I thought it was because it was overheating and/or die but I downloaded Core Temp to monitor if my fan work and the max temp it reached is 65 degrees celsius so I can't find the problem, it happens randomly, once I could play 2 hours withouth a BSOD and the following 5 minutes, I also tried to reinstall but nothing happened, I only overclock my Gpu, my cpu is a pretty old 1.8 ghz dual core but it can still run any game well enough, I also tried the option veryfier.exe which led to my computer crash at startup , so I had to disable using safe mode, and it was down deamon tools, is my failing processor or windows give up and I need to reinstall?

  Thanks for the help, the game does not cause me a BSOD since I've updated PCI sound card drivers which I didn't at first because the site is in a mixture of Japanese and really bad English.