How to simulate a DAQ hardware and use it to test applications without hardware?

                       How can I simulate a DAQ in MAX material and use it to test applications without hardware?

If my application requires input from external hardware to do how can I simulate a DAQ hardware in LabVEIW?

I need to simulate several digital inputs and outputs to test the software. currently I have not the material and material DAQ here.

answer with your valuable suggestions.

Thanks in advance

RENN

Hello

There is no option to simulate the traditional device. You need hardware for it so I would say to simulate a PXI system that has a configuration similar to the PCI-6014 and make a small change to your request...

Tags: NI Software

Similar Questions

  • Windows 8, 32-bit: how to cancel the file history and use the USB for the sole purpose Ready Boost

    By mistake, I clicked file history on. The USB key used for ready boost is selected and that the disk is write protected. Windows 8, 32-bit: how to cancel the file history and use the USB for the sole purpose Ready Boost. I don't have an another USB suitable for ready boost.

    Hello

    You should be able to disable the history of files by using the local Group Policy Editor.  Consult this publication of the article.  Use the #2 option.

  • How can I disable mcafee firewall and use windows defender in windows 8?

    How can I disable mcafee firewall and use windows defender in windows 8?

    It doesn't let me do using Panel and says it is managed by a client application of vendor - but it was a product of mcafee of track and it has expired.

    Go to programs and features in Control Panel and uninstall McAfee or use the McAfee removal tool.

  • I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

    I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

    How can I solve the problem and use the software again?

    If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

  • Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on t

    Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on this issue.

    single user licenses allow you to use the adobe corporate programs and allow to sell the products that you create using adobe programs.

  • mod_ntlm/AD/LDAP how the user password is recovered and used.

    I have an application that currently uses authorization authentication LDAP based on a username and password from the login screen 101 page. I am trying to convert it to a solution SSO using mod_ntlm authenticate the connection of windows users in Active Directory. I authenticate properly with a standard page Sentinel mod_ntlm let me access the application and I can use the owa_util.get_cgi_env ('remote_user') to get the user name. What I did not set is how to recover the password for users to pass as a parameter in the existing LDAP authorization functions.

    I founded a large part of the fieldwork on the following article
    http://withasmiletomeltathousandhearts.WordPress.com/2009/01/29/Apex-Windows-integrated-authentication/

    However, it relies on a pre-recorded LDAP_user and LDAP_Passwrd to extract data from AD. Rather than to do this I try to use the user currently connected, whose username I can recover, but I have not found a way to recover and use their password?

    What Miss me?

    Thanks in advance

    FunkyMonky

    I don't think that it is possible to ask for the password of the currently logged in user, which is good, as it is a problem of NTLM security.

    If your LDAP configuration does not allow for anonymous operations (most don't by default), then I think you need to use your "préstockés" user and password to access LDAP.

  • How to disable SSL 2.0 and use SSL 3.0 or TLS 1.0 instead.

    We want to disable SSL 2.0 and use SSL 3.0 or TLS 1.0 instead. We used the followign command:

    SET JAVA_OPTION = - Dweblogic.security.SSL.protocolVersion = SSL3 - Dweblogic.security.disableNullCipher = true

    but still SSL 2.0 is used. Help, please

    Deepak looking good so far.

    Let us know for any other help. We encourage you to create a service request with Oracle.

    See you soon,.

  • I want to disable firefox 19 pdf viewer and use foxit in the browser without downloading.

    I tried two methods that I have heard so far to disable the new firefox pdf 19 viewr:
    -in total: config pdfjs.disable set to true
    -options > Applications > set display pdf application

    The problem: when I'm on the Foxit pdf viewing application, firefox automatically downloads the pdf file to open it in the separate application. Until firefox 19, application of Foxit reader will open in the browser. How can Foxit not having an add-on firefox, I disable the pdf viewer 19 firefox and use Foxit Reader to open PDF files as a new tab in the browser?

    To display the content in a Firefox tab, it generally takes a plugin. If that's not come with the main installer, it seems that you can use one of them:

  • Upgrade to Firefox 4.0.1 and can no longer use my Norton Toolbar. How to return to my old and used Firefox?

    I use Firefox and Norton Toolbar 4.6 reports it is disabled because it is not compatible with Firefox 4.0.1. Given that I have use this feature much more that any increased in the new Firefox functionality, how can I revert to the previous version I was using? It's Firefox 3.6.17. Everything works and I'm happy to wait until Norton supports new version.

    Follow these steps.

    Go to Download Firefox v3.6.17 and upload it to the office.

    Then go to add/remove programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, etc., the customizations (don't tick the box).

    Reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox

    Finally, run the installation file downloaded previously on the desktop.

    Your bookmarks, etc., customizations are stored in a different location and will become available to you even once you complete the installation.

    EDIT: keep an eye on this thread product compatibility with Firefox updates Norton

  • How to install traditional DAQ parallel and DAQ mx in Windows 7

    Solved with NOR-DAQ traditional (old) 7.5 for Windows 2000/XP/Vista/7 - BETA and DAQmx Version 9.2.2

    Add traditional Support for a system with mx drivers installed.

    You need two files of unzipped installation package.

    Traditional installation driver 7.5 Beta, maybe you should do this by selecting the Compatibility Mode for an Installation of Vista.
    Go to your installation directory NIDAQmx--> products NOR - DAQ_INF_files--> infInstaller.msi.
    Right-click the--> Uninstall.
    Go to your repertoire of the installer of the 7.5--> products Beta NOR - DAQ_INF_files--> infInstaller.msi
    Double-click--> installation and proceed with click Next, Next, finish.

    Check in the Windows Device Manager, if the driver Date is now 19/09/2007
    and the Version of the driver 1.0.0.16384 or similar 1.0.xxx.

    Reboot your system.

    MAX check if your device is displayed in MX-tree and traditional.

    It worked for me for a NI DAQ PCI 6025 e card.

    I used WES 7 Standard SP1 32 bit / x 86. I have confirmation that it should work on any Windows 7 32-bit as well.

    Thank you very much!

  • How can I disable sapi 6 and use sapi 5 in windows vista and windows 7

    any body know how to disable the sapi 6 under vista so I can install sapi 5
    because sapi 6 runs outside the visual studio programming environment and cannot be completely disabled in visual studio for tts activating tts recognition is still ongoing and hears the tts and conventional disabling command with sapi 5 is not completely turn off recognition

    or any body know how to turn off the microphone in visual studio
    I found a lot of examples for c +, but the order of the mixer is not in visual basic
    examples of c + convert no more Basic, I was able to find an example of visual basic 6 complex really but I am unable to convert on visual basic studio and like I said it's really complex and very original programming uses I suppose that if I looked at him with her for a year I could understand it
    but right now it's just jiberish

    Hello

    I suggest you post the question in the forums and check them out below:

    http://social.msdn.Microsoft.com/forums/en/categories/

    It will be useful.

  • How to remove the initial synchronization and use restore backup

    dear friend

    Hello

    I have a question about replication of vsphere

    I limit my bandwidth of the network with my virtual disk machine (vm1) is so big (1 TB) I want to know if I can do the first step to get a copy or a backup of my vm and restore on my second host then to do replication on machine (vm1) when starting replication can he understand most of the data are the second host and not do the full synchronization or initial synchronization just make changes

    my means is: I want to remove the step of the initial sync and sync just to change data

    Best regards

    what you ask is quite possible.

    Replication of Virtual Machines using seeds of replication

    To minimize the network traffic generated by transfer of data during the initial full synchronization, replication vSphere allows you to copy virtual disk files or use the files that already exist in the target data store, and highlight those as seeds of replication when configuring a replication.

    vSphere replication compares the differences on the source and target site and replicates only the changed blocks.

    When, during the configuration of the replication, you select a target for the virtual machine data store,
    vSphere replication seeks a disk with the same file name in the target data store. If a file with the same name exists, vSphere replication invite with a warning you and offers you the possibility to use the disk file existing as a seed for replication. If you accept the option, after that the virtual machine fully configured and enabled, vSphere replication replication compares the differences and replicates only the changed blocks. If you do not agree to the command prompt, you must change the location for your replication target.

    NOTE If you plan to copy the files from the source to the target, the virtual machine data store source must be powered down before you download vmdk files which will be the seeds for replication.

    Ref: http://pubs.vmware.com/vsphere-replication-60/topic/com.vmware.ICbase/PDF/vsphere-replication-60-admin.pdf

    As the note says: power off the VM source and download VMDK who you plan to reproduce, to take them to the site data store target. When you set replication vSphere for your virtual machines, Wizard will ask you how you want to do, as if you have original seeds on the target site

  • After you install Windows XP Service Pack 3, my computer keeps restarting on repeatedly. How can I resolve this problem and use Service Pack 3?

    I downloaded Windows XP Service Pack 3, yesterday, Microsoft's official site, and after that I managed to install successfully, it makes my computer continuously.

    I searched this problem with Service Pack 3, and he seems to have an impact on nearly everyone who uses it.
    I also searched for solutions to this problem, but they do not work for me after that I tried them.
    I would greatly appreciate anyone who has solved this problem and did Service Pack3 achievable without having their computer restarted constantly.

    Hi Robert,.

    I managed to solve the WinXP SP3 reboot loop by reinstalling WinXP fully and then install SP3.
    Now, the reboot loop disappeared and I can use SP3 without any problem.
    Thank you very much for your help and assistance.
    I really appreciate it.
    Best regards
    Daniel
  • How can I customize my computer and use transparency?

    original title: How can I make my apprence good pc?

    in my pc I have windows 7, but its does not work properly my pc task bar appearance is not good and it is not transferable look... Please help me

    Assuming you meant tranparent and cannot be transferred the fix is quite easy. Simply right click your desktop--> personalize--> the window color and appearance--> and finally to enable transparency. Here you will find also more options for color and intensity. I hope this has helped!

  • How iterate through a symbol name and use & quot; push & quot; to add it to a table?

    I'm unable to the declaration to push.

    On my stage, I have ten marked blocks Block1, Block2... Block10. I added manually these blocks by drag-and - drop. Doing this because it's easier for me to figure where they should be on the scene to try to encode a routine for her.

    In my .as file, I created a table to contain all of these blocks. I can easily add a block to the table using code such as:

    blockArray.push (Block1)

    or

    blockArray.push (Block10)

    and so on.

    However, I would like to add all block elements in the table by using a loop and I cannot. I tried to code like this:


    for (var i = 1; i 11 <; i ++) {}
    blockArray.push (block + i);
    }

    My intention was to have 'i' iterate and so whenever the loop it would push Block1 and Block2 and then Block3, etc.. However, I get the following error when I try to compile:

    1120: access of undefined property Block

    Rather than adding value 'i' to the block so that I am referencing Block1, Block2 and so on, the code seems to think I'm just making reference to a symbol called block.

    Any thoughts on what code to use to solve this problem?

    Try something like this:

Maybe you are looking for