How to solve an error "HDD 1 (301)" on my HP Pavilion Dv7 notebook PC

HP Pavilion Dv7 Notebook Pc with OS! Windows 7 Home premium 64-bit.

Error message:-hard drive 1 (301) - it sounds like there might be a malware

Virus on it. 2012 on the laptop with me AVG Internet Security. I do not know

The guys at the shop where I bought it says that I must not update the laptop

software and drivers to many.

Hard disk 1 (301) is a hard disk failure. This means that the hard drive needs to be replaced.

You will need get a new hard drive and install it, then you will need to reinstall the Windows operating system using the HP recovery media. If you are in warranty, HP will send you replacement parts by your warranty conditions.

If you are out of warranty, you will need to buy a replacement hard drive, and then call HP to order the specific recovery HP for your portable media.

The number of American support is 1-800-474-6836.

I'll be happy to answer any additional questions or provide additional information if you want to replace it yourself. It is not too difficult.

Tags: Notebooks

Similar Questions

  • How to solve the error-1074396080 appeared in IMAQ Image color table

    Hello

    I'm above mentioned error.

    Here, I have attached my screenshot of the error.

    Could any one please guide me how to solve this error.

    I use kinect driver kinesthesia generating U24 Bit RGB Image and I want to convert it to Image IMAQ type, but I get an error mentioned.

    But when I do not use the acquisition of vision and vision assistant then every thing is good average is no any error which I have attached in annex 2.

    Please guide me how to solve this problem.

    Thank you very much.


  • How to solve the error 49 when the photoshop trial download?

    How to solve the error 49 when the photoshop trial download?

    Hello, Scarlett,.

    Please see the below help document to solve the problem:

    Download error, installation or update of Cloud Creative applications

    You can also see the thread below where the issue has been addressed:

    CC of Photoshop update failed. Download error 49

    Kind regards

    Sheena

  • I tried to download the free 30 day trial and I kept getting the message 'fail' 49. How to solve this error?

    I tried to download the free 30 day trial and I kept getting the message 'fail' 49. How to solve this error?

    Hi Charmaine.

    Please follow the article: error download, install or update creative Cloud applications that could help solve the above error message.

    Thank you

    Yann Arora

  • How to solve the error ORA-00001 in SQL Insert?

    Hi all, I need your help appreciated.

    I do a plsql procedure that inserts a line according to the value of the slider, I have error oracle ORA-00001: unique constraint (constraint_name) violated.

    This message may appear if a duplicate entry exists at a different level: in the RDBMS MySQL, I have the syntax IGNORES to solve this error of duplication... and in Oracle?

    Thanks for your time and your advice.
    Miguelito

    user6317803 wrote:
    How to solve the error ORA-00001 in SQL Insert?

    ORA-00001 means table a unique/primary key / index and you attempt to insert a row with the key value already exists in the table. I'll assume table has a primary key on COUNTRY_ID. Then modify SQL for:

    SQL = "INSERT INTO COUNTRIES (COUNTRY_ID, COUNTRY_NAME, REGION_ID) SELECT"BZ","BLZ", 3 DOUBLE WHERE DOES NOT EXIST (SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID ="BZ").

    There is a good chance COUNTRY table also has unique key/index on COUNTRY_NAME. If so use:

    SQL = "INSERT INTO COUNTRIES (COUNTRY_ID, COUNTRY_NAME, REGION_ID) SELECT"BZ","BLZ", 3 DOUBLE WHERE DOES NOT EXIST (SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID = 'BZ' OR 'BLZ' = COUNTRY_NAME).

    SY.

  • How to solve this error with Adobe After Effects CS6?

    I've updated operating system for OS X EI captain and since then, After Effects will not open (error attached photo).  All the other Applications of Adobe will open and working.  I have the Adobe Creative Suite 6 Master Collection.

    Screen Shot 2015-11-25 at 10.00.20 p.m..png

    Anyone who has encountered same problem and how to solve?

    I really want this problem to be resolved because I need After Effects for projects of the College.

    Kind regards

    John

    Install the 11.0.4 update. Instructions are here:

    After Effects CS6 (11.0.4) updated

  • How to solve this error message: errorinC:\windows\system32\spool\drivers\x64\3\lxcdtime.dll missing entry_Rundllentry@16

    I don't know how to resolve this error message. Can someone help me? ErrorinC:\windows\system32\spool\drivers\x64\3\lxcdtime.dll missing entry_Rundllentry@16

    Re-install your Lexmark printer driver

  • HP connection manager fatal error 80080005 8 windows on my HP Pavilion dv7-6b50ea

    Hi, I got this error for some time and now find hair on my bald head out have used Manager recovery and uninstalled - reinstalled - restarted my laptop, but still get this error on HP Pavilion dv7-6b50ea. Can anyone help please.

    Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Here is the link to the latest version of HP Support Assistant:

    http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

    Here is the link to the latest version of the HP Software Framework:

    http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

    So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

  • How can I check if the AHCI is enabled on my Pavilion dv7 1199ed?

    Hi all

    I recently bought a new SSD (Samsung 830 128 GB) to replace one of the two HARD drives containing faulty sectors. To use the TRIM, I need the SATA controller that AHCI enabled. How I check that? BIOS is unfortunately limited.

    If AHCI is not enabled, how can I activate it?

    Some data: Pavilion dv7 1199ed (I have no product number, because I'm sending you this issue of my work (don't tell my boss), my laptop is at home), using triple boot Vista, Ubuntu 12.04 (both on the HARD drive) and Debian Wheezy (freshly installed on the SSD).

    Thank you!

    Hello

    Even if the option is not available in the bios, AHCI is enabled by default.

    Kind regards

    DP - K

  • Satellite 1410-304: how to solve the error IDE #1?

    I read on the pins of connection 45 & 47 to solve 'error ide #1' and my question...
    How to change of mode c / salt/slave differently (without connecting pins)?
    I bought liteon dvd - RW drive (sosw - 833 s 51 c) and satellite 1410 304 facility and my laptop will not work with this drive (at startup 'ide #1 error', os do not drive)

    Hello

    I'm not 100% sure but c-salt/slave can not be changed. It is factory defined essentially as slave.

  • How to solve the error message "run-time error '3170', cannot find installable ISAM"

    Hello!
    Recently I was faced with a great difficulty to install a computer simulation problem.
    "International Futures" (you can here access the IFs - http://www.ifs.du.edu/ifs/index.aspx)

    After completing all installation of a software process ' IFs, I got an error message "runtime error '3170', cannot find installable ISAM" when the execution of the simulation program installed.

    How could I solve this problem? Please give me an easy solution!

    Hello

    What operating system is installed on your computer?

    This problem occurs if the application fails to access the database, this is why I suggest you to report your query in the community International Futures. Please visit the link below to find a community that will support what ask you:

    http://www.ifsforums.du.edu/

  • How to solve the error windows 8007641? Unable to install the update or access iTunes store.

    I keep trying to install the latest windows update and there no 2 x, so I hit the system restore to a point earlier, now it failed for the 3rd time and I get the error code 8007641. can you help me solve this problem? It all started when I couldn't access the iTunes store. Thank you

    Hello

    Update can't install?

    Method 1:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    I suggest to perform the clean boot and try to install the update manually and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    http://www.Microsoft.com/download/en/default.aspx

    Method 3:

    I also suggest you to follow the links and contact support apple technique.

    http://support.Apple.com/kb/ts3297

    http://support.Apple.com/kb/ts1368

    http://www.Apple.com/support/

  • How to solve the error error on page message

    I get the error message that says: error on the page, how can I fix

    Pleaee provide the EXACT text of the message (including all codes).  What type of program (name and version) or on what screen work when this happens?  How many times does it happen?  When did start?  What is a specific form within this program or all screens in the program?  It happens in other programs? It happens in response to any action on your part (like lick on a box or trying to type or other)? Which version of Vista you are using (for example, 32-bit Vista Business SP2)?

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If it does not, we expect the answers above - we cannot help you without more information (and perhaps more information once you provide these answers).

    Thanks and good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to solve an error internal

    Apex 5.0.

    Page 301 is an interactive report based on a join of multiple tables stored as a point of view.

    The link attribute called Page 302, from 3 ID values for the elements of page P302.

    Page 302 is a form of single-row using one of the 3 ID values as a primary key in the source table.

    This is accomplished by a generated, pre-rendered, after the header, Line of SSN_LINKprocess.

    Display only the values of the form are obtained by a second process after the header of pre-rendering,.

    This is a SQL query made by hand using two other ID values as a key compound in a table

    another database using a database link. (The 2nd data base is local, but on another device of DB).

    The call to the Page 302 works gently until we begin to use the filter on the interactive report.

    After filtering the report to a more specific list of people, the first call to the Page 302 will fail with an internal error.

    Back in the browser (Chrome) and retry the link works perfectly.

    Other links in the filtered list even work perfectly.

    But when the filter is removed, the first attempt to make a link to the Page 302 fails with the same internal error.

    Then, back in the browser and retry the link works perfectly.

    What toggles interactive report filter?

    Here's the technical info internal error, which I do not know how to interpret it:

    Internal error

    Contact your administrator for the application.

    http://cobra1:8081/i/htmldb/builder/rollup_minus_dgray.gifTechnical information (only visible to developers)
    • is_internal_error: true
    • apex_error_code: APEX. ERROR. INTERNAL
    • Component.type: APEX_APPLICATION_PAGE_REGIONS
    • Component.ID: 2554504249580925
    • error_backtrace: - stack of PL/SQL calls.
    • the line object
    • serial number of handle
    • package body 641 0xd3b3b4e0 APEX_050000.WWV_FLOW_ERROR
    • package body 709 0xd3b3b4e0 APEX_050000.WWV_FLOW_ERROR
    • body of 0xd3b3b4e0 1013 package APEX_050000.WWV_FLOW_ERROR
    • body of 0xd3b3b4e0 1106 package APEX_050000.WWV_FLOW_ERROR
    • 0xc0488c18 body 1749 package APEX_050000.WWV_FLOW_PLUGIN
    • package body 2622 0xc0488c18 APEX_050000.WWV_FLOW_PLUGIN
    • 0xd3a800f0 body 4535 package APEX_050000.WWV_FLOW
    • 0xc093e170 173 APEX_050000.F procedure
    • 0xcc2b4fc0 30 anonymous block

    Continuing to probe without a lot of guidance, the culprit was discovered. To simplify the generic question how to go about debugging and maybe understand package WWV_FLOW obscured, calls I left a piece of the change in the URL. When the checksum (& cs) change, there is also a PLUGIN B2C8 =... argument (64 alphanumeric characters) in the f? parameter p! It is in the position that is delimited by colons for the value of the REQUEST in the call to the page. This is the interactive report acts differently and tries to provide a useless APPLICATION to me. So my pages may not rely on the default substitution parameter and I need to redevelop a method by which the sequence of page 301-302 knows where it comes from. (Sometimes the breadcrumb will be pages 1-301-302 and other times 501-301-302, and there are 2 components of bread crumbs different pages 301 and 302).

    So in this case, the internal error was not disclosed as a bad value of the APPLICATION, but the problem has been identified by searches on parameters and arguments to the/f? p URL. As Microsoft said, "an error occurred."

  • How to solve the error E:31:00 in a Camcorder HDR-XR160?

    I am very disappointed wth Sony quality. I chose this camera for the capacity of the hard drive and now I can't access all the videos of my family vacation. I would like to know how to grab the videos and restore the hard drive to the E:31:00 error.

    Hello Uls,
    Welcome to the community of Sony.

    Follow the steps below to reset the camcorder:
    (1) turn off the camcorder.
    (2) remove the battery or disconnect the AC adapter for 60 seconds.
    (3) Insert the battery or reconnect the AC adapter.
    (4) turn on the camcorder.

    Press the button to reset, using a small pin object did during 2-3 seconds, to reset the camera to factory default settings.

    If the issue is still unresolved, the camcorder will require repairs.
    See the link below to start the service request.
    https://eService.Sony.com

    Before launching the service request, you can contact the Sony Media Services support team to retrieve the files.
    You can contact them from this link.

    If my post answered your question, please mark it as an "accepted Solution".

Maybe you are looking for