How to specify the port in webview

Similar Questions

• I can't figure out how to open the port of CD.

  * Original title: CD player

  I can't figure out how to open the port of CD. There are no buttons, and online forums have not helped. Any suggestions?

  Of course - just go on this PC (or computer) and r / click on the DVD/CD drive - you should see "eject" as shown below. Usually there will be a button in the center of the disc too... but sometimes well hidden tray! -Ric.

  

• How to follow the port on my router ipstar

  How to follow the port on my router ipstar

  Nothing to do with Windows.

  (1) read the help/documentation that accompanies it.
  2) go to the ipstar website and look for information.

• How to specify the custom application BB10 WebWorks category

  How to specify the custom in BB10 WebWorks app category. If tried, but it seems that this does not work for me. What shoul I do it.

  Hello.

  I think the element of config.xml standard tag would be the rim: category, as in the example of documentation:

  but it seems not be supported yet for BB10. You can ask a question to the github repo, I think that the BB10 Packer must be at the right place.

• How to change the Port WSX

  I should have said that I am under WS 9.0.2 (production) here.  So I do not know where to post

  My host is Fedora 19.  When I try to go to the localhost:8888 reports of Firefox "unable to connect".

  The output of netstat - ttlnp is:

  TCP 0 0 0.0.0.0:111 0.0.0.0: * LISTEN.
  TCP 0 0 127.0.0.1:8307 0.0.0.0: * LISTEN.
  TCP 0 0 192.168.122.1:53 0.0.0.0: * LISTEN.
  TCP 0 0 0.0.0.0:22 0.0.0.0: * LISTEN.
  TCP 0 0 127.0.0.1:631 0.0.0.0: * LISTEN.
  TCP 0 0 127.0.0.1:25 0.0.0.0: * LISTEN.
  TCP 0 0 0.0.0.0:443 0.0.0.0: * LISTEN.
  TCP 0 0 0.0.0.0:17500 0.0.0.0: * LISTEN 2852/dropbox
  TCP 0 0 0.0.0.0:902 0.0.0.0: * LISTEN.
  tcp6       0      0 :::111                  :::*                    LISTEN      -
  tcp6 0 0: 1:8307: * LISTENING.
  tcp6       0      0 :::22                   :::*                    LISTEN      -
  tcp6       0      0 ::1:631                 :::*                    LISTEN      -
  tcp6 0 0: 443

  Go to localhost:631 brings up the page of CUPS online.

  Maybe if I changed WSX in listening on port 8307 I might have better luck.

  But just run sudo/usr/bin/vmware-install vmware-wsx u

  and then reinstall thke bundle does not give the possibility to specify the port - I got the first time I ran the bundle.

  In which directory is the spec WSX port number and I can change it?

  -----------------------------------------------------------------------------

  This was solved by uninstalling WSX 1.02 (dereconfiguring I should say) and then installing the beta version 1.1 (allowing NoScript OK access to localhost).  Always the possibility to change change the port was not found, but 8888 worked if the thread is unanswered. .  I would like to move this thread to the WSX forum but it's fairly inactive last I checked.

  WSX login screen looks better, but it will take me a while to go through the changelog.

  Hey Buddy,

  Could you please try to modify the configuration file under/etc/vmware/wsx?

  I update the port 8888 to 8901 and restart the service. Then I can access through http://localhost:8901 wsx.

  I tried on Fedora 18 x 32.

  I hope this can help.

• How to specify the 'static' or 'dynamic' text in Flash CS5?

  Hmmm. things have moved in the CS5 version! How to specify the text 'static' or 'dynamic '? Can't find the selection in the Properties palette.

  Thank you-

  Should be right at the top of the properties panel. First, make sure you select your text box. In addition, change TLF text in classic text.

• How to specify the color for LR space?

  How to specify the color for LR space?

  chlonini said:

  How to specify the color for LR space?

  LR only uses the ProPhoto RGB color space. You cannot specify any other

  color space (work). When you export pictures, you can specify a

  different color space to convert. Or if you use an external editor.

  You can choose what color space to send to the external editor.

• How to specify the instance in SQL * more command line?

  Hello
  
  I'm learning to Oracle. I currently have 2 instances of database running. I wanted to connect to one of the bodies and used the following command from the command line:
  

  sqlplus system as sysdba/abc123@ocp11gsid
  
  where 1234 is the password for the system user in the ocp11gsys instance.

  When I run the command above, SQL * more ask me the password. I do not understand why he asks me the password because I provided on the command line.
  
  What is the correct command line, so he asks me the password? (without defining the variable ORACLE_SID of environment - basically, I want to know how to specify the user, his password and sid, all in the sqlplus command line, without being prompted to enter the password that I mentioned.)
  
  Thank you for your help,
  
  John.

  John,

  This is how it works.

  E:\Documents and Settings\aristadba>sqlplus system/oracle as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 22:49:25 2010
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL>
  

  And now it ask the password,

  E:\Documents and Settings\aristadba>sqlplus system as sysdba/oracle
  
  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 22:50:42 2010
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Enter password:
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL>
  

  Spot the difference?

  The user name and password must unite. What you are to provide the password with the role where it will not be considered.

  Update
  I missed that part,

  What is the correct command line, so he asks me the password? (without defining the variable ORACLE_SID of environment - basically, I want to know how to specify the user, his password and sid, all in the sqlplus command line, without being prompted to enter the password that I mentioned.)

  The only thing that you can specify is the user name and password. The SID must be defined by you, either explicitly using the export or oraenv command if you are on the local system and do not use the TNS to connect to the instance. If you use the TNS, then an appropriate entry should be there which would connect to the required database.

  HTH
  Aman...

  Published by: Aman... on August 2, 2010 22:54

• How to specify the tablespace for a India primary key in create table statement

  How to specify the storage space for a primary key index in a create table statement?
  Does the following statement is true?

  CREATE TABLE 'GPS'||TO_CHAR(SYSDATE+1,'YYYYMMDD')
              ("ID" NUMBER(10,0) NOT NULL ENABLE, 
              "IP_ADDRESS" VARCHAR2(32 BYTE), 
              "EQUIPMENT_ID" VARCHAR2(32 BYTE), 
              "PACKET_DT" DATE, 
              "PACKET" VARCHAR2(255 BYTE), 
              "PACKET_FORMAT" VARCHAR2(32 BYTE), 
              "SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP, 
               CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") TABLESPACE "INDEX_DATA"
               )            
               TABLESPACE "SBM_DATA";   

  Thank you
  
  Published by: qkc November 9, 2009 13:42

  As orafad noted, you can use the documentation using ESCALATION clause, i.e.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE GPS
    2              ("ID" NUMBER(10,0) NOT NULL ENABLE,
    3              "IP_ADDRESS" VARCHAR2(32 BYTE),
    4              "EQUIPMENT_ID" VARCHAR2(32 BYTE),
    5              "PACKET_DT" DATE,
    6              "PACKET" VARCHAR2(255 BYTE),
    7              "PACKET_FORMAT" VARCHAR2(32 BYTE),
    8              "SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP,
    9               CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") USING INDEX TABLESP
  ACE "USERS"
   10               )
   11*              TABLESPACE "USERS"
  SQL> /
  
  Table created.
  

  Justin

• How to find the port # OEM?

  How to find the port # in the Oracle enterprise Manager URL (http://mydatabase:xxxx / em /). I installed the Oracle long back do not write the URL. How to find the number XXXX in this case?
  Oracle 10g R2.
  Thank you
  Smith

  emctl status dbconsole

  It's probably in 1158 or 5500 (according to the version)

  Kind regards
  Uwe

  http://uhesse.WordPress.com

• How to specify the sampling frequency? Must use "measurement & Automation Explorer '?

  I use to measure the input current analog OR cDAQ-9171 (chassis only location USB) and NOR-9207. I have 2010 NOR-installed DAQmx and LabVIEW.

  How can I specify the sampling frequency?

  If I use M & A Explorer to create the task, I can specify the flow rate (Hz) on the Configuration tab-> sync settings.

  For the acquisition of data NOR, it is mandatory to use M & A exploring?

  If I don't want to use M & A Explorer, how can I specify the rate (Hz)?

  Hello

  You can specify the sampling frequency with "DAQmx Timing.vi" located in the function palette DAQmx (read context-sensitive help on how to use wisely).

  You do not have to use M & A exploring (MAX) to create a task.

  A simple and quick way is to use DAQ Assistant (same configuration as in MAX) to configure your measurement.

  Another is to use blocks of DAQmx function to manually build your application code.

  In my experience Assistant DAQ is ideal for simple tasks (one measure), with regard to the more complex measures (synchronized the analog and digital inputs).

  I tend to use function blocks because they give you more freedom about code execution.

  Note: You can also build DAQmx code from a wizard configured DAQ task.

  Best regards

  Matej

• Mailer Object - specify the Port

  Hi all and Ryan in particular.

  Problems with the mailer.  Until about a week ago, the sender has worked well thanks to a third-party SMTP relay service (local ISP requires authentication - with SMTP.com has solved the problem).  However, it seems that now, the local ISP has blocked port 25 and emails can get through.

  I can send emails from Outlook Express by the relay service very well using the port 2525.

  I'm assuming that uses port 25 as its default port Mailer.

  Is there a way to specify or change the port used by the mailer to send e-mails?

  This is important because it is the only method of notification of alarm for installation for 16 hours a day unattended.

  Answer please [email protected]

  Alan H.

  Alan,

  I'll give you a new mailer.cbx file. You can use the ini file to set the port. I would like to know if it works or not.

  Moreover, what is your version of lookout? If you use 5.x, I'll build another.

  Note that it is not an official component released.

• How to specify the precision required to NonLinearCurveFit

  Hi all

  I use the Non linear adjustment method. The method takes all accept the argument of the crieteria judgment. Only the crieteria there is the max iteration. I want the algorithm to iterate until what the quadratic error average of 1E-08 is reached. However it seems that the crieteria exit is hard-coded to be the value of the minimum deviation of function Marit 0.001.

  I work with a very small number here and therefore require very high precision.

  Can someone tell me a workaround to get higher level accuracy (as if the scale would help? if yes, then what is the exact procedure? I tried my way to him but not luck). I have another software (which is a freeware) using who, when I do this adjustment, the residue is minimal (less than 1E-10, quite within my acceptable limits) but when I use the library OR (for which I paid a very high amount) it stops fairly early whithout allowing me to specify the precision desired.

  I know that updates the library would not be that at first, but any idea on no good workaround solution is appreciated.

  And I suggest strongly to it please add this facility throughout the CurveFit library in your future updates. Any professional library must allow the user to decide what level of precision is good enough!

  Kind regards

  Alok

  Its been a week since I posted this question, but not one of the people NOR. SAD!

  However after a long on internet serching, found following link

  http://www.datamaster2003.com/

  For all of you who are stuck with all of CurveFit of NOR and its limits, this is the easiest way to use any type of estimators. Here are the features:

  1. only for linear and Non-linear editing library

  2 user can set thresholds and weights to the settings

  3. the user can define the function by the string expression. So no question of changing the definition of the function to try new possibilities of functions.

  I was very moved with this activeX control which is a FREEWARE. Maybe people NOR should learn how the library should be when they charge astronomical values for Measurement Studio and you give implementations where the user didn't flexibililty even specify the threshold. I guess the majority of implementations of the EMM is better suited for the acedemic only search.

  For commercial uses, this FREEWARE is far more superior as Measurement Studio.

  Kind regards

  Alok dandois.

• How to specify the location of CSS with BlackBerry S/w Version 4.5

  I use version 4.5 software.

  I'm developing some login pages in html and to specify the location of the CSS file. Documentation, I noticed that the HTML tag does not support the rel attributes or the type attribute that you can set to the style sheet and text/css.

  How can we embark/link CSS in the html file?

  Thanks in advance.

  The link tag should work. Maybe the docs are wrong. Best way is to just try and see what happens.

• How to specify the names of the icons on the desktop?

  How can I specify the names of desktop applications and shortcuts icons so that they appear in alphabetical order when I sort by name?

  Here is a partial list of the order of the icons on my desktop windows 7:

  The Quicken Premier

  WinFF

  AbiWord

  Command prompt

  Cygwin Terminal

  Thank you

  Paul.

  Paul

  The situation is there are two files that make up the office.

  One is your office users, and the other is Office public users.

  When you sort by name, they are classified as two lists.

  Some software during installation, installs for all users and put the shortcut in the Public Office.

  The best way to accomplish what you want is to ensure that all the shortcuts are in one of the two folders.

  Your office is located in C:\Users\*your username user name * \Desktop

  The other is in the C:\Users\Public\Public Office, which is a hidden folder

  Paul