How to start isqlplus * on the linux platform

Similar Questions

• How to start to use the Oracle client to access the database?

  People,
  
  Hello. I just installed Oracle Client (Instant Client) in the directory/home/myOracle/Oracle_Client.
  But I don't know how to start and configure the client to access Oracle database.
  
  Can all folk tell me how to start to use the Oracle client to access the database?

  user8860348 wrote:
  People,

  Hello. I've successfully used Oracle SQL Developer. But I want to know how to use the Instant Client.

  Can any folk tell me how to use the Client then just install it?

  I guess you're hurting understand the definition of Client instant, there isn't a tool or application or tool GUI as a sql developer or another that you can start using. It's just client installed with the minimum characteristics
  If you want to use the right application tool install sql developer in your instant client or simply running sqlplus

  See you soon

• How to start IrDA by the BIOS on my Qosmio F10?

  Hello

  I have a Qosmio F10, and I read that the port IrDA does not start by the bios at startup, but by the operating system.
  How can I do to start my IrDA port with the bios at startup? Is this possible? Cause that will help you a lot

  Another question, yesterday I've post a message on the Linux driver. When I ve clicked on "post message" I ve got a message "this message must be approved by a moderator" but, I do not see my forum topic, but why yesterday, my topic was to be accepted by a moderator and today my topic doesn't have it?

  Post edited by: benlog

  Hello

  It is not possible to make some changes on the IRDA port in the BIOS. If the IRDA port is available on the machine, the operating system can recognize automatically. As far as I know that the infrared port is always enabled for communication with the other device that has obtained permit port IRDA.

  Good bye

• How to start DIRECTLY in the library (instead of starting firefox > bookmarks > show all bookmarks) is there a switch or something else to do?

  Rather than start FF and then go where I want via the bookmark to right, I would like to start * directly * to the library;

  -Today, I need to:
  1. open FF
  2. open the library
  3. close FF

  How to get to the library of everything right on, without going through the FF window first?

  Kind regards
  Alex.

  Launch Firefox with a chrome URL:

  firefox -chrome chrome://browser/content/places/places.xul
  

  • https://developer.Mozilla.org/en/Command_Line_Options

• How to start to use the first pro

  In creative cloud, I am installed first pro it show 'up-to-date '. I can't use first pro. How to start using the program.

  Thank you
  

  Please see system requirements | Adobe Premiere Pro

• How to start to put the program in place

  IM new to adobe and the need to learn how to start the process

  Hi Robert,.

  Try Adobe Creative cloud.

  Reference: DOWNLOAD Adobe Creative Cloud apps | CC free trial Adobe

  Kind regards

  Sheena

• Satellite U400-146 - how to start recovery without the recovery disk

  I need to try to do a restore system on my Satellite U400-146.
  However, I don't think it came with a disc.
  Does anyone know how to initiate recovery of the system on this laptop?

  Hello

  The recovery disk was not provided with the laptop because there is a tool called Toshiba Recovery disk Creator that allows you to create a recovery disc!
  Please check if you can create a recovery disk using this tool!

  If this is not possible, then you can check if the HARD drive recovery is available.
  For more details, see the HOW TO:
  [How to recover a Toshiba notebook with the HDD recovery procedure? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=58]

  As a last option, you can order a disk recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Restart the VMware Tools service in all the LINUX platform.

  Dear team,

  Please help me with the command to restart the Service tool VMware in any platform Linux (RedHat/SUSE/Ubuntu, etc.) and where it actually settle, the fodler where it settle.

  Concerning

  Mr. VMware.

  Hello

  Use the command as follows:
  $ sudo /etc/init.d/vmware-tools start
$ sudo /etc/init.d/vmware-tools stop
$ sudo /etc/init.d/vmware-tools restart

  I hope this helps.

  Thank you

  SA

• How to start and stop the APEX?

  Hi all! I am new to this forum and APEX too...

  We are runing (Version: Application Express 4.1.1.00.23)

  I need to reboot the server.

  How can I stop APEX graciously and start back after? Thank you!

  Kind regards

  Ghyslain salvation,

  to reinforce what Mike says. Apex is a database and, with the exception of the HTTP server application, runs entirely on the database. (Note with EPG, its all in the database) It contained in the users/schemas database and built items of data such as tables and PL/SQL packages. If the server that is running the Oracle database in which the Apex is installed needs to be restarted, the database must be stopped, which stops indeed Apex. If the HTTP server is also running on this server (ESS or earpiece of the Apex) then this should be stop as well.

  Of course, if your desire is not to stop the database, but to deny the user access to the Apex, perhaps for purposes of maintenance of database, then this can be done by stopping the HTTP server or by stopping the EPG.

  I hope it is clear now.

  André

• How to start to write the plugin (TortoiseSVN?) SVN for TS?

  Hello

  As in the subject.

  Any idea where to start?

  K

  Hi MimiKLM,

  You can connect to the SubVersion using an independent plugin like PushOK SVN or SVN Agent. These two are paid tools. I'm not aware of a tool open source that does the same thing.

  I hope this helps.

• How to start and stop the video capture in a state machine

  Hello

  I am a student of neuroscience and this is what I try to do: 1) trigger a camera to GigE (200 FPS), 2) start the video capture, 3) triggers a light that stays on for x milliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve at the same time and 5) stop the video capture 1 second after 4). For this, my VI is a state machine, with a State for each trigger (ex, 1 State for trigger camera 1 State of light of trigger, ect) and a statement to "stop" and a "time-out State." Everything worked except the video acquisition - the program could trigger the camera but only acquire a frame, because it was not running in a while loop and this is my first question: for an acquisition video is it always necessary to have a while loop?
  I guess the answer is Yes, so I built a loop of 'consumer' for the camera. A queue of the pre-trial 'trigger camera' in the loop of producer, I was then able to start the video capture, but now the problem is to stop it at the right time. I have an another queue in the State of 'stop' in the loop of the producer, but is not able to start the State 'stop' in the loop of consumer, I think that maybe it's because the loop of consumer gets "stuck" in the whole loop.

  I hope you can help me, the VI is attached. Thank you!

  Hello

  First of all, in your loop producer: STATE 'Stop', you use the flushing line, then there is no need to use 'item queue at the opposite end. You can use the enqueue function.

  Secondly, you said "I moved the command stop inside the while loop as you said, but it did not work. But if you look closely, you moved "Enqueue function" inside the while loop. Instead you should use Dequeue function. Please, look at the picture I posted an orderly manner.

  And remove the circled (i.e. function. Enqueue function loop of consumption, where I wrote 'Why stop here').

  Try now.

• Re installation Dell is 920 printer says spooler service must be started. How to start and get the printer to work?

  Windows XP... Dell desktop computer and printer

  Although Christopher has correctly described a way to start the Printer Spooler service, chances are that he won't stop even once until you remove the problem that caused its judgment in the first place.

  Often, but not always, the print spooler stops because there is a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• How lsnr start automatically when the computer starts

  Hello
  
  My OS is windows7 and Oracle version 11.2.0
  
  Whenever I start listener manually to start the computer. Is it possible to start car?
  
  Best regards

  have you checked the State of the listener service in the windows services console? (Start-> Run-> services.msc)

• How to start to let the other post from people on my site?

  Hello, I'm pretty new to dreamweaver. I worked on one we

  site for about 9 months now ya did know a little of my knowledge

  with the program.

  I want to be able to allow others who come to my site to post there own comments, thoughts and images or what ever. but I don't know where to even start.

  can someone point me in the right direction or possibly show me the basics of what I need to do to make this happen?

  I suppose I could add a bit more to it: Let's see, my name is chris and I thank you for your help... If you have good advice and I would like to help a web developer new patient and dertmined, you can contact me via yahoo messenger or email. my yahoo id is be_direct2002 and my email is [email protected].

  Once again thanks for your help.

  BTW im do not yet know with mysql or php or having my own server, but im in the chomping little to get to this point.

  IM currently using Global Domains International as my host. Honestly I don't know if they place restrictions on what you can do, or if there is even a restriction that prevents using things such as php, etc. I ftp through dreamweaver all my sites files, so I do all the codeing handmade by dreamweaver, blah enough tidious. but I prefer to enjoy the work... Should have gone to school for this instead of all the other nonsense that I jumped around through.

  Learning fast but behind on all the jargon, HELP Please, me lov you long LOL thanks again!

  Post edited by: Melchisedec1980

  I'm here seven days a week, lately. PM me if you need.

• How to start and stop the timer by using the keyboard.

  Hello, I would really like to help please, I have

  here to launch a program whereby I press a key

  which starts the timer and press another button to stop the timer, the

  delay is displayed and used to move an object on the phase on the delay dependant.

  Thank you

  Attach a listener of events on the stage of your film.

  stage... addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);

  According to the http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/events/KeyboardEvent.html# KEY_DOWN

  1 if you want any key, so you don't need a key code.

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  2. If you want the same key to both use a Boolean value like this:

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == MyKey) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  }

  3. If you want two different keys

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == myStartKey) {}

  start my Countdown

  } Else if (event.keyCode == myStopKey) {}

  Cancel and reset my timer

  }

  }

  }