How to start the tunnels without the need of ping to a remote host
That's the big question!
How can you tunnels without need to ping to a remote host in the target network? Our clients get hung on a regular basis because of this problem. 10 points for the first answer!
Hello
You can configure KeepAlive on end VPN.
For example
On PIX
ISAKMP keepalive 2 30
On IOS
ISAKMP crypto keepalive 10 periodicals
If it does not solve that and you need some kind of traffic you can configure NTP on the link VPN (source of the private interface it is so interesting traffic for VPN).
HTH
Sangaré
Tags: Cisco Security
Similar Questions
-
How to start the assessment without a device
Hello
I downloaded the evaluation version.
How to start the assessment without a device?
Thank you
DV63
Hi DV63,
Welcome to the Forums EITHER!
If you downloaded an evaluation version of LabVIEW your 30 day trial must begin immediately after being invited to enter a serial number. You can choose not to enter a serial number and this will begin your trial period. I recommend that you install OR-DAQmx device drivers; It is a software that allows you to communicate with the hardware from National Instruments DAQ. However, this facility will be particularly useful because it allows you to simulate an Instrument with the measurement and Automation Explorer (MAX); This means that you can immediately start the signals in LabVIEW.
-
How to start the database and servers after the installation of the Webcenter JSK Portal
Hello
I finally installed the portal WebCenter using JSK, after it turned off the machine, I don't know how to start the database or server, I need to set the environment variables? create the oracletab file? or is it a file .sh to start the database and servers?
Any help will be great!
Best regards!
Thanks Françoise-Oracle for your response
As you say, I need to go to /WCPortal_JSK_Linux.x 86-64/linux64, I found all the scripts that I needed to start or stop a server or database. But more especially if you run evertything, (I did) you just need to run the de./startup.sh script and wait, he'll run, but take some time.
Best regards!
-
How to start the agent on the database host computer that is being monitored
Hi all
I installed OEM 11.2.1.0. I stopped getting alerts after the 1 server node is restarted. I followed RAC database.
When I checked the status of the host agent I get the following output
[oracle@rs1pre91dvdba01 bin] $ pwd
/ u01/app/Oracle/agent11g/bin
State of the agent emctl [oracle@rs1pre91dvdba01 bin] $
ORACLE_UNQNAME environment variable not defined. Please install ORACLE_UNQNAME in unique name of database.
[oracle@rs1pre91dvdba01 bin] $ export ORACLE_UNQNAME = MDM11
State of the agent emctl [oracle@rs1pre91dvdba01 bin] $
The MA Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_MDM11 not found.
[oracle@rs1pre91dvdba01 bin] $
And even on node 2
[oracle@rs1pre91dvdba02 bin] $ pwd
/ u01/app/Oracle/agent11g/bin
[oracle@rs1pre91dvdba02 bin] $ export ORACLE_UNQNAME = MDM12
State of the agent emctl [oracle@rs1pre91dvdba02 bin] $
The MA Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/rs1pre91dvdba02_MDM12 not found.
Please can I know how to start the agent on the nodes and also auto how the boot process of the agent on the server restart
Thank you.I assume that you have installed your agent in the directory
/ u01/app/Oracle/agent11g/bin
If this is correct then run the following commands
Export ORACLE_HOME = / u01/app/oracle/agent11g /.
export LD_LIBRARY_PATH = / u01/app/oracle/agent11g/libPATH = $ORACLE_HOME/bin:. : $PATH; export PATH
As a matter of fact, you need to set the environment variables separate for the agent to execute commands
which are related to the agent. These distinct environment must be set correctly to ensure that the
commands can be found in the appropriate directories...Then, run the status command emctl agent...
-
Hello
I installed the database 10g on linux
How to start the isqlplus in the browser window
Is there a command that I need to run
pls helpSee:
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14196/em_manage006.htm#sthref168Edit
In fact, there is an OBE on this subject as well:
http://www.Oracle.com/technology/OBE/obe10gdb/install/isqlplus/isqlplus.htmPublished by: hoek on December 30, 2009 08:38
-
I can't understand how to start the calendar after the migration.
I can't understand how to start the calendar of lighting. Documentation, said he will start automatically, but it doesn't.
I reinstalled Thunderbird with the XPI in the folder with the exec install and now it works. Install documentation is poor.
-
Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you
So what measures through 'install '?
-
I discovered that Windows defender is disabled. I tried to turn it back on, and he said that there is an error. How can I turn it back on? Anyone with information would be a great help. How to start the service manually? __
Hellocould a. you give us the exact error that you are experiencing?
(b) also mention the error code, as well if it is listed.
have c. you installed other software security like McAfee, Microsoft Security Essentials etc. ?
Let us check if the service is set to automatic.1. Click Start-> run and type services.msc
2. now, locate the service named Windows Defender,
3. double click to bring up the Properties window.
4. set the startup type to automatic
5. click on apply, and then click Start
6. click OK, and then click Close window Services/LocalWe hope to hear from you soon.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
How to start the database using CRS to start the database instance
Dear Experts,
How to start the database using CRS to start the database instance
As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.
There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.
-
How to start the service in order
Hello
I'm new to Hyperion.
Can someone tell me how to start the service for HFM, planning and Essbase?
Thanks in advance...
HanPlease read the following document:
http://download.Oracle.com/docs/CD/E12825_01/EPM.111/epm_install_troubleshooting.PDF -
How to start the database aautomatically
Hello
Oracle Version: 10.2.0.1(standard edition)
OS: FEDORA 7
Can someone help me please on how to start the base database automatically when the server is in place.http://www.Oracle-base.com/articles/Linux/AutomatingDatabaseStartupAndShutdownOnLinux.php
Good, nice and clear link to auto-start the PB on linux.
HTH
Girish Sharma -
Hello
I'm trying to follow the steps described in the following link:
How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?
It is said
The software on the target currently supports only the time zoneand deletes the old files?
I need set the date and time
and remove all the old unwanted files
the calendar was gray does not allow me to change the current date.
Anyone know how to change
Hi all!
According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.
If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.
Please let us know if you have any questions!
-
- How to maximize the number of RDP session for Remote Desktop connections in windows 2008 server?
- By default, the system says 2. and to not change/increase.
- is everything permissible special necessary to buy?
HelloYour question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to maximize the number of RDP session for Office remote connections to the server. Appropriate in instances of Windows Server.
Please post your question in the Forums of Windows Server.
-
How one move the templates of virtual machine from one host to another host in the cluster even
Hello
Can you get it someone please let me know how to move the templates of virtual machine from one host to another host in the cluster even?
Thank you
James
Welcome to the forums!
Convert it to a virtual machine (right click on guest and choose the appropriateoption), move it through the migration feature (right-click Guest, and then choose "Migrate") and convert into a model (right click on guest again and choose to convert to a template).
If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!
AWo
VCP / vEXPERT 2009
-
How to start the program without the run button
How can I start the program from the moment I opened the vi?
without the use of the race.
Thank you
Under properties for vi, performance, click on run when open as in the screenshot of Jeff . Do not post any code set to run when open forums!
Maybe you are looking for
-
Message that had been opened and was text inside is no longer have text. Just a white screen. Others just code and no original text. How to restore these to be able to read the message?
-
Clicking on web links embedded in the email does not work correctly
With FF3.6 and earlier versions when you clicked on a link in an email, the focus would turn to the FF window with a new tab open to the linked web page. With 4.0 when you click window link a launches new FF, reduced to a minimum and it is on my home
-
I received notice to install the microsoft agent using the fix. Must I do cela or should I wait for an update to my windows 7?
-
using the button to select distinct values
I would like to have a button where a user can choose one of four options: 6, 12, 18, 24. I updated the properties of force and I changed the labels so that it looks only four options are available but it always allows me to choose between 6 to 24 i
-
Photosmart 7520: msg of error on the cartridges
Hi... need help with an error message on the ink cartridges. I read through the forum and other people are having the same problem. I get the message "one or more cartridges appear to be missing or damaged." Until then it was printing normally. I