How to stop a program Sonic Module of Activation at startup?

Original title: computer problems

Can advise you on how to stop a Sonic Module of Activation program on my system. whenever I turn it on. I don't have a disk to load this software/program and its considerable amount causing of annoyance, as I can't in my emails or anything else, because this also slows down the whole system and sometimes crashes. I have just tried, except to any clean/reboot. That I will need some help with. All I want is to get my computer working again. I hope that makes sense to anyone that I'm fed up with this. His summer lasts for too long time now. What can I do and how please.

Thank you
Vee

Hello

See the following Web site for a solution.

Solved: Sonic Module of Activation at startup:
http://forums.techguy.org/all-other-software/457318-solved-Sonic-activation-module-startup.html

Let us know if it works for you.

Concerning

Tags: Windows

Similar Questions

  • How to stop a program to declare - XPP

    in Windows XP, if once you have uncheched in the start menu in MSCONFIG, restarted the computer and the program always starts when the computer is turned on, how to stop the program to start the power?

    Msconfig should simply be used for testing. To disable a startup item, download and run Autoruns.

  • When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

    When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

    Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

  • How to stop a program to open when I start my computer?

    How to stop a program to open when I start my computer?

    I would check the following:

    1. The program has an option to stop from?
    2. Otherwise use Windows Defender to disable: http://windows.microsoft.com/en-US/windows-vista/Stop-a-program-from-running-automatically-when-Windows-starts . If you cannot use Windows Defender because your antivirus turns off, you have to use the Configuration utility system; See: http://windows.microsoft.com/en-US/windows-vista/Start-System-Configuration and http://windows.microsoft.com/en-US/windows-vista/Using-System-Configuration
    3. Some products start themselves in other ways. Http://technet.microsoft.com/en-us/sysinternals/bb963902 Autoruns lists most of these places. This tool is designed for advanced users. Incorrect use can result in an unusable system. See: http://forum.sysinternals.com/what-to-uncheck-and-what-not_topic5226.html
  • How to stop simultaneous programs to the external server

    Hello

    Oracle R12.1.3 application

    We have a database server node, an internal server and an external server. Now, I want to stop the concurrent program to the external server.

    I changed the variable s_concstatus to disabled and ran autoconfig. But still the current simultaneous program to the external server. A few times the program simultaneous log file is created in external rather than internal server server.

    Please tell the procedure how to stop the program contributing to the external server.

    Is order I need to run autoconfig between server to affect you.

    Please notify.

    Thank you

    I tried to change the variable s_concstatus to disabled but no luck.

    It is set correctly on the internal node?

    What happens if you start the CM on the node internal then? What is the bahvior?

    Thank you

    Hussein

  • When I start XP, Windows Installer wants to launch Sonic Module of Activation

    When I start it up, Windows Installer wants to launch Sonic Module of Activation... it stalls when it tells me to install the CD (which I did not)... Then I must cancel at least six times before I can use my computer... what gives?  How can I get rid of this?

    * original title - how can I get rid of the sound Activation Module at startup? *

    Download Autoruns from Microsoft:

    Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902 >

    Run the program.  It will give you a list of everything that is running when you upgrade Windows.  Start with the 'Connection' tab and see if you can find any startup item that corresponds to your Sonic Activation error.  Then simply uncheck the box in front of him and put an end to the program.

    HTH,
    JW

  • How to stop the program with 2 cases of event

    I know that this is a very easy solution, but I can't seem to find it.

    I have two cases of the event in a while loop. I worked previously with the case of an event, so I placed the button stop in the case of the event. However if I have 2 cases of the event can't place the button stop in one of them so, how can I stop the program then?

    If the stop button is outside of the case that the program will not stop.

    Here's my vi of adding two different values for output according to which key

    Add a change event value case more for wire to terminal under condition of loop and stop button.

    find the attached VI

    Kind regards

    Chick S

  • How to stop a program

    Hello

    I build a LabView LabView 2011 program to control experience. The entire program is contained in a stacked sequence and this sequence is maintained within a driving main while loop. This hand while the loop is controlled by a Stop button, which is associated with, a local variable and in my intentions, stop buttons and the associated local variable of were intended to stop the program at different points during execution.

    Now the way that program is built the button stop of course never actually stops execution of the program, because as the main while loop contains the entire program, the stop button, which is the first iteration of the false status, will never change its status to 'true' before the first iteration, it is the whole of the program, is completed. So I know the reason why I am not able to stop my program, but I don't know how to fix this. I read that queues, events or notifiers might solve my problem, but I have no idea how to use.

    Can someone help me with this please?

    Thank you very much

    It is one of the main reasons for not to use the structures of the sequence.  I think that a State Machine is what you really want.  In this way, you can stop the program at any time.

  • How to stop a program of pinning the icon on the taskbar

    Everytime I open Mozilla Firefox icon gets pinned to the taskbar. When I close the program the icon remains. How to stop the PIN to the taskbar?

    Whenever you open a program it automatically temporarily himself the PIN to the taskbar and disappears when you close the program.  This is done by default.

    If it is still there when you close the program then somewhere along you chose to pin to the taskbar for easy access whenever you want.  If the icon is still there when you close the program, right click it and no waiting.

  • How to stop a program such as internet explore running on administrator

    I have programs on my computer... and when I try to remove programs in the control panel it says I can't delete in its run by administrator

    My question is how do I stop all my files and programs managed by the administrator please
     
    Thank you

    Hello

    1. what happens when you double click and open?

    2. do you get an error message?

    3. have you logged as administrator?

    I suggest you to follow these steps and check if that helps.

    Method 1:

    Try to perform the clean boot and check if it helps:

    http://support.Microsoft.com/kb/929135

    NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

    Method 2:

    Try creating a new user account and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    It will be useful.

  • How to stop auto programming of the command after booking

    When I did the installation program, I had an obligation to stop the autoscheduling, I was able to stop when recording by setting the profile option ' OM: AutoSchedule "no, and the 'calendar om auto games' system setting no. and unchecking the box autoschedule as part of operation type. but when booking, the customer order gets automatically scheduled.

    How can I stop the autoscheduling the command system at the time of booking?

    You seem to have stopped the "Autoschedule" which is simply the action of schedule when the order is saved.  Your workflow line has annex step right after the step of booking?  If so, this is what is causing your planning to occur.  If you do not want the scheduling to happen, you might consider putting on hold.

  • How to stop a program called with exec.vi system

    Hey Gang,

    I need to run a third-party application of in LabVIEW.  It works fine when it is called with the exec.vi system, as long as the user has entered the correct data.  However in some (very difficult to determine) conditions, the application crashes.

    I want to be able to force by program the application to complete and return to LV I assumed that there is a way to do it using the Windows API, but I don't know how to do this, and I would need a way to get the handle of the offending application Windows.

    Short re - implement the app in BT, I'm out of ideas.  I'll appreciate any help.

    Thank you

    Roger

    If you could post a picture of the offending code, it would be great. but two things come to mind, if you expect the exploit code (for example go to a wait for a period, then kill a task) wire: completion to false.

    then is another call to command prompt, look in taskkill /f

    You can kill a process

    It may be useful

  • II you need VERY basic instructions on how to stop a program from running at startup, without the help of Windows Defender.

    I have a Vista operating system, I use Firefox as my browser and I have MS Security Essentials, I turn off my Windows Defender.  I want to disable some programs from starting automatically, but I can't figure out how do it when I can not use this feature in Windows Defender.  I'm not at all read and write or experienced in computers or software, so PLEASE keep this in mind.  I really need advice for flush on a kindergarten, with each specific step the easiest way, so I can understand & follow him.

    Thank you for your help in this matter, as well as for your understanding of my limitations.

    CA DJ

    Hello

    Without knowing the programs you want to disable, I'll start by saying that I can't be responsible for adverse effect to the normal operation of your system.

    That said...

    • Click Start
    • Type msconfig and press enter
    • Click on the Startup tab

    You will see checkboxes for programs that run at startup.

    Or you can use a more comprehensive tool called autoruns...

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    Maybe is a better way to explore the settings for the programs themselves, there is often a check box for "do not run at startup.

    Tricky

  • I'm running mse how to stop a program at startup to the top

    How do I change start programs when running microsoft security essentials,

    Use windows defender, but understand that this is blocked during execution of mse.

    also my pc is very slow the beginning upward since installing mse, is this normal?

    How do I change start programs when running microsoft security essentials,

    Use windows defender, but understand that this is blocked during execution of mse.

    also my pc is very slow the beginning upward since installing mse, is this normal?

    The quickest way to disable a startup program, in addition to the use of Windows Defender...

    Start button > in the search box, type msconfig > press > start up tab > here is the list of startup programs.

    To disable, uncheck the box in front.

    To activate... check the box opposite.

    Be careful, make sure you know for sure the program that you turn off will NOT affect the performance of the system.

  • How to stop a program that runs as administrator

    When you start a program that I use regularly, I clicked "run as administrator", how can I fix this so the program no longer works as an administrator?

    I tried to go in the properties and uncheck "run as Administrator".

    Help, please!

    The "Run as Administrator" option in the menu popup is used only once when you select.  It is not stored and permantently used for future time you use the program.

    Just close the program, then click the icon to open it normally and it is no longer "will run as an administrator" unless tell you him again.

Maybe you are looking for

  • WIN 7/64, no updates, code 80246008, BITS could not started

    Hello the problem of update I have is quite similar to the a J.J.blair.013 described under the link: http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/da840ce8-bab3-462D-9580-035ee6d32fee I first tried basics like http://Windows.Microso

  • By default the control ring

    I have a control of the ring which is to have a default value of . I can't replace it with a new control of the ring that I use a lot of its property nodes in different cases. How to remove the default... ? I have attached the control for reference.

  • Letters change to the capitals and enter the function is blocked

    L.S. I use a Probook 4730 s 64-bit. I type blind So maybe I'm doing something wrong while typing. When I am typing in a box like that or Skype or MSN or a contact form used by companies to ask the question while typing the letters change in capitals

  • How do I create a second account along side my only Admin account? (I have good need?)

    I am new to Vista and Windows7 and all the reading I've done, I'm horrified to discover that I would have had a secondary user account whenever I go on the Internet and perform simple tasks.  (Right)?  I want to assure you that I know how to create t

  • Can I replace with purple plug by a grey connector?

    Hello HP Deskjet power my mother 2050B is down after the warranty. It's a 0957-2286 with purple plug type power (30V and 333 mA, on the ground, not connected). Can I replace it with an older type of electricity supply 0950-4401 with gray connector (3