How to stop external connections to my wireless network?

Similar Questions

• Laptop won't connect to a wireless network

  Hello. My Dell laptop has stopped to connect to a wireless network. He had been the connection very well for months until about a week ago. Then he would only reconnect when I restarted my laptop. Now it doesn't connect at all. I'm in Windows 8. I tried to solve the problems, but nothing worked, I also tried to remove the network from the list and reconnect, but without success. Any help would be great.

  Windows 8 did a diagnostic self test... and it automatically fixed my problems with the connection via WiFi.   He is now on the connection manually.  Apparently, he has been on the connection automatically.  I have di0sconnected my Ethernet connection, before you run the test.  Then it is automatically set to manual connection.

• When I try to connect to my wireless network, that it asks a security key how do I find the key my router is a comtrend CT-5363

  When I try to connect to my wireless network, that it asks a security key how do I find the key my router is a comtrend CT-5363

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. who is your internet service provider?

  If you use windows7, I suggest you to follow the steps from the links and check out.

  Set up a wireless router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a security key for a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-security-key-for-a-wireless-network

• How to remove or delete network domestic (not homegroup) so that I can access and connect to our wireless network.

  I have Windows 7 and it is connected to the network via a home network (not homegroup - that is not disconnected).

  We have a set up wireless network and the other computer, tv, xbox, cell phones, tablet, that all were connected successfully to our home wi - fi configuration. My Dell windows 7 is always connected through an old home network of a previous wired router. How in the world I remove, delete or otherwise change the settings so that I can connect to the wireless network. My computer does not even list or recognize the wireless network. Help, please. I looked and looked and can't find anything to help me.

  My computer does not even list or recognize the wireless network.

  If your machine does not list the wireless networks, this is caused by one of the following:

  • There are no active of nearby wireless networks.
  • The machine doesn't have a wireless adapter.
  • The wireless adapter is disabled.
  • The wireless adapter is disabled. Most laptops have a switch or some facility keyboard to turn off the wireless network card.

• How can I disable 'O2 connection manager' to automatically connect to the wireless network?

  Original title: I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection

  I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection to the network.

  Hi John,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  If you do not O2 connection manager, you can disable it to connect to the Internet or you can uninstall the program and check the issue.

  You can follow the steps in the link below.

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I would say O2 you back for more information in the links below:

  http://www.O2.co.UK/business/support

  http://community.o2online.IE/

  I hope that the information above helps you.

• I get my connection wizard of wireless network to work when I get the RunDLL error "an exception occurred while trying to run"wzcdlg.dll, FlashConfigCreateNetwork"

  Original title: wireless network connection wizard does not work

  How can I get my connection wizard of wireless network to work when I get the RunDLL error "an exception occurred while trying to run 'wzcdlg.dll, FlashConfigCreateNetwork' I can see no wireless connections more.  Not sure why all of a sudden it stopped working.  Thank you!

  Hi ChadWilliams_1974,

  Try the following methods:

  Method 1: Try the steps from the link.

  Troubleshooting network connection problems:

  http://www.Microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx#3

  Method 2: Reset TCP/IP Protocol, you can run the fix it from the link below and check if the problem is resolved.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  I hope this helps.

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Pavilion p6-2310: can no longer connect to our wireless network

  All of a sudden our PC no longer has a connection to our wireless network.  We looked at the list of installed programs and it shows Ralink RT539OR 802.11bgn Wi - Fi adapter has having been installed today - but we have no install anything today.  Is it a coincidence that shows like this and all of a sudden we can access our wireless network?  How do we get working again that it is necessary as soon as possible?  Thanks for any help.

  Thank you.  I'm like a dog with a bone when it comes to these things and not rest until I get solved.  So, I found something in the knowledge base of the forum who pointed me in the right direction.  Using Device Manager we uninstalled and reinstalled the card wifi, and bingo, it works again.  Ceases to amaze me, but how a computer works fine 1 minute and then the next time that you are never going to use it, boom, something does not work.  And you did nothing to change anything so that it does not work.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Windows is unable to find certificate to connect to my wireless network.

  I am trying to connect to my wireless network and it says I'm connected but validating identity with an exclamation mark.  A window pop up if poster that says windows can not fine a certificate for you to connect to my network.  My internet provider said that they could not help me, it's a windows problem.  How can I fix it?

  Hello

  Your wireless network is probably configured as if it is attached to cooperate Wireless Network (AKA RADUIS).

  Look at the Configuration Wireless in the network connection properties and uncheck, enable IEEE 802. 1 x

  See central panel here, http://www.ezlan.net/wireless/wzc4.jpg

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• Photosmart C4599 connects to the wireless network

  System details: Windows 7 64 bit, HP Photosmart C4599 Limited Edition. Wireless network (Netgear router) with visible SSID and MAC filter.

  As the title suggests: my wireless printer is not connecting to my wireless network more. The reason that it is 'more' is because he used to work. But my wireless router has started to lose the internet connection - and I read somewhere that it might work to change the broadcast channel of the router (instead of channel 11 to 13). And it helped.
  But since then, the printer was not able to connect. I tried it back - and interruption of the internet connection but the printer worked (a little).

  I tell myself that I have to reset the wireless printers Setup, I don't know how to do.

  Ok.  I think that the issue would be with the channel.  It might be too high a frequency for the printer to communicate properly.  You can have a heavy traffic on any channel, it depends on what is around you.  I recommend trying channel 1 or 6.  You should be able to download a parser for your smart phone wifi see what are the channels have less useage.

• Can I update my system to connect to a wireless network?

  is it possible to convert a vista inspiron 530 for a wireless connection

  I run an Inspiron 530 Vista OS, it's the outside improved power supply basic package and the graphics card.

  Hello

  1. Why do you want to be upgraded to connect to the wireless network?

  2. are - what you are talking about to upgrade to Windows 7?

  As you are using a desktop computer, you must purchase and install a Peripheral Component Interconnect (PCI) wireless adapter or a USB wireless adapter, and then you will be able to connect to the wireless network.

  Once you purchase and install the adapter, please try the steps in the following Microsoft articles.

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  View and connect to available wireless networks:

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-connect-to-available-wireless-networks

  And see also the following Microsoft article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-a-wireless-network-is-secure

  Hope the information is useful.