How to tie the two serial numbers using test including the tie in the database.

I have two separate committees, I need to link the serial number too.  One is being tested as a separate unit, then the two are tested together, I need to make sure that I connect them in the database.  Don't know how to do it, looking for any input I can get.  Using a labVIEW vi to request the entry of a Board, and then use information interface to USE testbed for UUT of the hand.

I have juries, one of the boards, A onboard, was tested by a different sequence file, then A is connected to Board B, and then they are tested as a complete set.  Received a few suggestions on how to save the two serial numbers, but went with a popup message added types of step (modified record results), and then just have the user scann the second number in and it stands as one of the results of the step in the database.

Tags: NI Software

Similar Questions

  • try re-installing CS5 on a new hard drive... I forgot to remove my CS5 on the old hard drive... I have the CD of installation of CS5... I've updated from CS3 and have two serial numbers

    try re-installing CS5 on a new hard drive... I forgot to remove my CS5 on the old hard drive... I have the CD of installation of CS5... I've updated from CS3 and have two serial numbers...

    I use a PC...

    Please check Adobe - Creative Suite 5 Master Collection: System requirements and try to install the product, please let us know if you are unable to activate. You can check: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,

    I hope this helps.

  • I lost my two serial numbers


    Hello

    Good day.

    in September 2011, I was a student at Nottingham Trent University and I bought a web Adobe CS5 premium format I used the first serial number on my first laptop, but it was stolen, so I bought a new laptop and used the second serial number on this topic, today as I fool to my laptop and I lost the two serial numbers and it is not easy to get them in the way common, because I am not a student any more I don't have a student ID. can you help me with this question means?

    Thank you

    concerning

    Martine Hatem

    Lost information - response #1 in https://forums.adobe.com/thread/2008767

  • How can I get two jobs when using two monitors, instead of stretching a desktop on both screens?

    Hello!

    How can I get two jobs when using two monitors, instead of stretching a desktop on both screens? I n ' want to clone my office, and I don't want to stretch it. I want two desktop computers, where I can "send/give" to the other desktop programs.

    I need a third party program? It is very good. If you know one please tell me about it.

    Hi OskarKvist,

    This feature is not supported by Windows XP.

    However, you can use your favorite search engine to download any third-party software that could serve the purpose.

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope the helps of information.

  • I get two serial numbers when I buy ColdFusion 11 full license?

    I just bought full ColdFusion 11 Standard license (no upgrade license).

    The order from Adobe e-mail contains two different serial numbers, why?

    This means only with a single purchase of ColdFusion 11 can I legally install, license and run on two different servers?

    Or y at - it an explanation for having two serial numbers?

    Hello

    I suppose that a set of keys is your CF11 Standard or Enterprise and the other set of keys are for ColdFusion Builder.

    HTH, Carl.

  • How to start the database using CRS to start the database instance

    Dear Experts,

    How to start the database using CRS to start the database instance

    As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

    There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.

  • How to know the database uses pfile or spfile?

    Hi guru

    How to know the database uses pfile or spfile?



    Thank you

    Thank you for this question of doc!
    Please type in sql * show spfile parameter.
    If it is empty, you do not use a spfile.

    --------------
    Sybrand Bakker
    Senior Oracle DBA

  • Help, how to query the database using pagination

    Hello

    How to query the database using paging for large data.

    any API for this?

    Thank you in advance!

    Hello

    You can specify XmlQueryContext::Lazy as the type of assessment and only call XmlResults:: next() comes as many times as you need.

    John

  • How to start the database and servers after the installation of the Webcenter JSK Portal

    Hello

    I finally installed the portal WebCenter using JSK, after it turned off the machine, I don't know how to start the database or server, I need to set the environment variables? create the oracletab file? or is it a file .sh to start the database and servers?

    Any help will be great!

    Best regards!

    Thanks Françoise-Oracle for your response

    As you say, I need to go to /WCPortal_JSK_Linux.x 86-64/linux64, I found all the scripts that I needed to start or stop a server or database. But more especially if you run evertything, (I did) you just need to run the de./startup.sh script and wait, he'll run, but take some time.

    Best regards!

  • How to display the database column value in a component of choice selected?

    Hello everyone;

    I use Jdeveloper 11.1.1.4 and right now I have the .jspx UI page that includes < af:selectonechoice / > components and according to the requirment I have to fill one of the column in the table in this drop-down list.

    can someone tell me how to fill the database column value in this drop-down list. I know I need to create the VO for the same thing, but I'm new to this technology. Then please suggest.

    Thanks in advance.,

    This will help u

    https://blogs.Oracle.com/prajkumar/entry/create_lov_in_adf_application

    How to create LOV in ADF 11 g | Techartifact

    Oracle Fusion Middleware Technologies: 11G: how to create a list of Values (LOV)?

    http://www.baigzeeshan.com/2010/03/creating-lov-in-ADF-application.html

    http://husaindalal.blogspot.de/2010/05/How-to-default-lov-with-its-first-value.html

  • How to check the database is created in the database of node 2 RAC

    Hi all

    Please allow questions maybe too obvious. I'm not familiar with RAC and ASM.
    virtual box (Windows 7)

    2 built nodes on Linux 6.1 Windows 64-bit virtual machine.
    11.2.0.3 software grid & database.
    One of DB name is demo
    Node1 (demo1)
    Node2 (demo2)


    1. I installed the 11.2.0.3 grid software and set up ASM with her. The installation seems to succeed.

    I am able to use view state using crsctl (see the log)

    2. I installed the database software and you want to create a database (demo) by default. the software from 95%, but not able to realized the dbca.

    I see that the asm_pmon is running, but not able to see the process of demo db. I think at this point, I don't have my demo of database has been created yet.

    Yes, question
    1: is the database created?
    2. I try to use dbca to create my demo db, but at the stage of creation of the 'copy of the database files' - she complaint ORA-03114: not connected to ORACLE
    ???? What? What oracle server trying to connect?
    3. If the database is created, how to start the database, in particular it has 2 instances (demo1 and demo2)?

    Please advise!

    Thank you very much!




    [grid@demo1 ~] $ crsctl stat res t
    --------------------------------------------------------------------------------
    TARGET STATE SERVER STATE_DETAILS NAME
    --------------------------------------------------------------------------------
    Local resources
    --------------------------------------------------------------------------------
    ORA. DATA.dg
    Demo1 ONLINE
    Demo2 online
    ORA. LISTENER.lsnr
    Demo1 ONLINE
    Demo2 online
    ORA.asm
    Demo1 Started online
    Demo2 Started ONLINE
    ORA. GSD
    In offline mode offline demo1
    Demo2 offline offline
    ORA.net1.Network
    Demo1 ONLINE
    Demo2 online
    ORA.ons
    Demo1 ONLINE
    Demo2 online
    --------------------------------------------------------------------------------
    Cluster resources
    --------------------------------------------------------------------------------
    ORA. LISTENER_SCAN1. LSNR
    1 demo1 ONLINE
    ORA.demo1.VIP
    1 demo1 ONLINE
    ORA.demo2.VIP
    1 demo2 online
    ORA. CVU
    1 demo1 ONLINE
    ORA. OC4J
    1 demo1 ONLINE
    ORA.scan1.VIP
    1 demo1 ONLINE

    Published by: 969880 on November 13, 2012 14:18

    1. What is sure, is that your database is not registered in OCR because there are missing elements in crsctl stat res t exit for database instances.
    2. default DBCA trying to restore an RMAN backup to create a database. DBCA probably also try to connect to the new instance of the database to run scripts.
    3. you must use:

    srvctl start database -d demo
    

    This should start all database instances.

    But first try to check the DBCA logs that should be under $ORACLE_HOME/cfgtoollogs/dbca and to correct related errors.

  • How to recover the database when archive some of the log file are deleted.

    I am facing a problem with the Oracle database, which is linked to archivelogs.
    Our development database is running in archivelog mode, but we don't have safeguards and have no recovery catalog.
    When the database was in running, disk got full, so some archivelogs were deleted manually.
    After that they have restarted the DB, and DB now not come. The errors are as follows:

    -------------------------------------------------------------------------------------------------------------


    SQL > startup
    ORACLE instance started.

    Total System Global Area 1444383504 bytes
    Bytes of size 731920 fixed
    486539264 variable size bytes
    956301312 of database buffers bytes
    Redo buffers 811008 bytes
    Mounted database.
    ORA-01589: must use RESETLOGS or NORESETLOGS option of database open


    SQL > alter database open resetlogs;
    ALTER database open resetlogs
    *
    ERROR on line 1:
    ORA-01113: file 1 needs media recovery
    ORA-01110: data file 1: ' / export/home/oracle/dev/ADVFRW/ADVFRW.system'


    SQL > recover datafile ' / export/home/oracle/dev/ADVFRW/ADVFRW.system'
    ORA-00283: cool cancelled due to errors
    ORA-01610: recovery using BACKUP CONTROLFILE option must be


    SQL > restore database using backup controlfile;
    ORA-00279: change 215548705 generated at 2008-09-02 17:06:10 needed for thread
    1
    ORA-00289: suggestion:
    /export/home/Oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.arc
    ORA-00280: change 215548705 thread 1 is in sequence #1107


    Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
    /export/home/Oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.arc
    ORA-00308: cannot open archived log
    ' / export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
    ORA-27037: unable to get file status
    SVR4 error: 2: no such file or directory
    Additional information: 3


    Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
    Cancel
    Cancelled media recovery.
    SQL >

    -------------------------------------------------------------------------------------------------------------


    1 how to recover the database and put online

    Any help will be much appreciated.

    Regarding
    Hemant Joshi

    Published by: hem_Kec on 7 Sep 2008 09:07

    Hello

    It is actually quite easy.
    We knew that Oracle was looking for logsequence 1107. There is no archived log, it was deleted, or it has never generated. As you delete files, the 1st solution would be possible, BUT as there was only an instance crash so more old archived logs is not required for crash recovery. There is a need during the restoration of the old backup files, which is not our case.

    Thus, the missing log sequence has not been archived = > it is a redo log.
    To identify the required online redo log, we just to log query v$ as I suggest.

    Once the log identified file, we can recover it by specifying the redo log when you ask logsequence 1107.

    And it is on. We win! :)

  • Why two serial numbers?

    Sorry if this isn't the usual but confusing technical issue. The registration of my photosmart c7280

    has asked me to enter a serial number of the device, the problem, is there are two different serial numbers, one on the

    the machine base and the other based on the gray box dark at the back of the device both starting MY82-.

    Should I assume that the number that corresponds to that on the area of the machine came in is correct and if so this

    importance has the other number obtained, as appropriate. Thank you for your time and superior knowledge.

    2nd serial number may be for the sides of the printer module. If you want to find the serial number of the printer, then print a self test report by pressing the Setup button > print report > self-test report. You will not see the correct serial number. in the upper left corner of the page. Although 14 digits, use only the first 10 digits during registration.

  • How to copy the database using rman file from another location.

    You can clone data base using the files of rman backup from somewhere else (on the server to clone).

    I have two server db source and clone db server.
    I normally copy the files of RMAN backup to clone server (under the same folder structure, as it was on the source server).

    The purpose of the test, IE I don't have same partition and free space on the source server and the clone.

    I usually use under notes to the clone.
    http://trysellit.com/hosting/Ttrail/Fajr.php?doc=wtrail & ND = 0556200

    I would try to explain for example again.
    In source server, my rman backup are stored in / U01 and clone server, I copied the files of rman /u04. What step I should take to clone to work anywhere else?

    Using Oracle 10 g on Linux RedHat.

    sape007 wrote:
    Thanks Ken & PrafullaNath.

    BUT my question is: how to transport .dbf files in another place on the clone (I already do).

    Rather:
    The clone is on another server. How to restore by copying the RMAN files from another location on the clone. Please read description above in its entirety.

    Sorry for not being clear.

    Please see my video tutorial. In this tutorial that I take backup of the database, copy the backup to the different server and perform a recovery disaster

  • How to export the database and import the database using sql developer

    Hello

    I need to export the database to a server and import it on another server db using the export function of database under the Tools menu in SQLl developer. How to import it? This is for Oracle database 10g.

    Thank you

    Hello

    I think it generates the file .sql containing all the objects that you are exported. Then you can simply open the target database file and run as a script. Also, there is another forum for sqldeveloper related issues.

    Concerning

Maybe you are looking for

  • channels drop-down list box

    I'm trying to get some combo boxes to have their entries populated by a text file. I have read many entries of forum on 'string []' property, but he refuses to work for me. I want the combo box is editable by changing the entries in a text file. Does

  • X200t blue screen

    I'm having a problem with the x200t 17 tablets that I manage. If I change some things in the way that the graphical output, it blue screens of the machine. Especially if I have the tablet should extend the desktop on an external monitor and I pull th

  • Error 0 x 80070570 when you access my flash drive using windows 7

    I get an error 0 x 80070570 when you access my flash drive using windows 7, but the same flash drive works perfectly on two other PC's with Windows XP. It's frustrating because I need to backup and transfer files.

  • BlackBerry 10 calendar

    Suddenly, my calendar doesn't work. It is empty. I have several e-mail accounts, including Outlook, Gmail etc. The content of all of the calendars has disappeared. I enter a new event in the calendar of BB, it is accepted but does not appear in the c

  • Smart failure predicted hard disk. Code 0:ST9250315AS

    My laptop continues to send me the message above