How to tour calculations with two decimal places (scaling of the form)

Similar Questions

• How I find myself with two passwords to iCloud for the same account?

  How I find myself with two passwords to iCloud for the same account?

  For security reasons, I only use iCloud for Contacts and "find my iPhone".

  Several months ago Apple forced me to change my password to iCloud.  So I did this.   In the last months, I used successfully the new password to 10 or 12 times when asked without problem.

  However, I received a notification of a software update for my Apple Watch. I did the update without problem. However, after completing the update my iPhone asked me to connect to my iCloud account. When I did this, she rejected my password. I made 4 attempts typing very slowly and with care for you sure I did it right.

  Then, operating under a hunch, I decided to enter my old password to iCloud. It worked?  I'm confused about this, any ideas would be appreciated.

  I had a similar problem last year. I had to call Apple. Contact is a bottom of this page.

• I have a basic calculation, but I can't figure out how to make the total tower with two decimal places

  Here is the code I use. I looked everywhere, but I couldn't find answers on how to round specific numbers, not total String.

  Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;

  gccalculate.addEventListener (TouchEvent.TOUCH_TAP, fl_TapHandler_21);

  function fl_TapHandler_21(event:TouchEvent):void

  {

  var a: number = Number (input1.text) * Number (input2.text) *.01 * Number (input3.text).

  total.set_Text = String (a);

  }

  use toFixed():

  Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;

  gccalculate.addEventListener (TouchEvent.TOUCH_TAP, fl_TapHandler_21);

  function fl_TapHandler_21(event:TouchEvent):void

  {

  var a: number = Number (input1.text) * Number (input2.text) *.01 * Number (input3.text).

  total.set_Text = a.toFixed (2);

  }

• Tour of metric to two decimal places by using [math]: tour

  I use the following psobject to extract performance data, but I have around two of the measures with two decimal places. Usually, I would use [math]: round ($var, 2) but I do not know how to integrate this into the code and settings, I need are AvgMem and AvgCPU.

  $groups | % {

  New-object PSObject-property @ {}

  'TimeIndex' = $_. Group [0]. TimeStamp

  "AvgMem" = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Measure-object-property value - average | Select - ExpandProperty average

  "AvgCPU" = $_. Group | where {$_.} MetricId - eq "cpu.usage.average"} | Measure-object-property value - average | Select - ExpandProperty average

  'TotalMemory' = $TotalMemory.Split(".") | Select - index 0

  'TotalCPU' = ((Get-cluster_$cluster_|_get-vmhost_|_%_{$_}_|_measure-object-property_cputotalmhz-sum).sum)

  "Cluster" = $cluster

  'Data center' = $DC

  				"vCenter' = $vcenter
  				"Home" = $VMSummary.Hostname

  }

  }

  Any help is appreciated

  Thanks in advance

  Do you have one loan try like this

  $groups | % {

  New-object PSObject-property @ {}

  'TimeIndex' = $_. Group [0]. TimeStamp

  "AvgMem" = [math]: Round (($_.)) Group | where {$_.} MetricId - eq "mem.usage.average"} | Measure-object-property value - average | Select average - ExpandProperty), 2)

  "AvgCPU" = [math]: Round (($_.)) Group | where {$_.} MetricId - eq "cpu.usage.average"} | Measure-object-property value - average | Select average - ExpandProperty), 2)

  'TotalMemory' = $TotalMemory.Split(".") | Select - index 0

  'TotalCPU' = ((Get-cluster_$cluster_|_get-vmhost_|_%_{$_}_|_measure-object-property_cputotalmhz-sum).sum)

  "Cluster" = $cluster

  'Data center' = $DC

  "vCenter' = $vcenter

  "Home" = $VMSummary.Hostname

  }

  }

• Limitation of DISTANCE to two decimal places

  I pretty much get the Google Maps API, talking to my SQL database. For the results of my research, I have SQL code:

  SELECT *, (3959 * acos (cos (radians (".")))) $POST ["latitude"]. (radians (lat)))) * cos * cos ((LNG) radians: radians (".")) $POST ["longitude"]. ")) + sin (radians (". "))" $_POST ["latitude"]. ")) * sin (radians (lat))) AS distance FROM VenuesGeocodes1 HAVING distance < 100 ORDER BY LIMIT 0, 30;"

  That works very well, but will display the distance to 15 decimal places, which is an exaggeration full.

  How can I limit that to only two decimal places? I thought I just needed to change the distance to distance (10.2), but he doesn't like it.

  If anyone can let me know what need would be much appreciated.

  Thank you.

  If you use PHP, you can do it like this:

  $grandtotal = number_format($grandtotal,2,'.',',');

• rounded to two decimal places

  my cost per month textbox typically returns several decimal places, is it possible to limit it's out to two decimal places as actual monetary calculations?

  calculatebutton.addEventListener (MouseEvent.CLICK, doMyCalculation);

  calculatebutton2.addEventListener (MouseEvent.CLICK, doMyCalculation2);

  costpermonth. Restrict = '. 0-9 ";

  {

  var strFileName: number;

  strFileName = Number (costofitem.text) - (amountsaved.text) Number;

  amountneedtosave. Text = String (myAnswer);

  }

  function doMyCalculation2(e:MouseEvent):void

  {

  var myAnswer2: number;

  myAnswer2 = Number (amountneedtosave.text) / Number (howmanymonths.text).

  costpermonth. Text = String (myAnswer2);

  }

  Use the numbers toFixed() method:

  amountneedtosave. Text = myAnswer.toFixed (2);

• trunc percentage two decimal places

  I have a report that offers the option of dispalying pdf or excel. I have the pdf version works fine, but I'm having a little trouble on the version of excel. I have a grand total and the total for the Department. Basically, I need help formatting two decimal places. The dept_total and the grand_total are numbers that both display. I have another column that indicates what percentage of the total is in every Department it currently returns a number such as 10.23383547957459973, I need to display in the form of 10.23, how can I integrate the trunc function in this code?
  
  (...to_char((dept_total/Grand_Total) * 100)
  
  The query looks like this.
  Select
  TO_CHAR (a._grand_total)
  to_char (a.dept_total)
  TO_CHAR ((dept_total/grand_total) * 100)
  de)
  Select sum (xxxx) grand_total,
  Sum (xxxx) dept_total
  According to the table) one

  TO_CHAR (trunc ((dept_total/Grand_Total) * 100.2))

  Or, if you want to round to two decimals palces:

  TO_CHAR (Round ((dept_total/Grand_Total) * 100.2))

  SY.

• Format of number to two decimal places

  Hi all
  
  I tried to find a similar question on OTN position but were not very successful. Found [this: http://forums.oracle.com/forums/thread.jspa?messageID=4231352 & #4231352], but this isn't the right solution for me.
  
  I want to convert a number (to two decimal places) to a string, but keep the trailing zeros. The number can be of any length.
  
  So, for example
  
  Number String          
  1234.5 1234.50
  323213.1 323213.10
  9876.23 9876.23
  
  Using a mask of format with to_char function does not work for me because the results are recorded in a text using UTL_FILE file and I don't want any white space.
  
  For example
  
  Select to_char (1234.40, '9999999.99') of double
  TO_CHAR (1232.70,99999999.99)
  ----------------------------
  1232.70
  
  As you can see the to_char doesn't work only partially. It keeps the two decimals and add a zero, but it also hads of white space at the front of the number. I could change the format mask to "9999.99', but then if the number is 12345.12 or 123.12 it wouldn't work!
  
  Thank you!

  Use the format fm modifier:

  Select to_char(1234.40, 'fm9999999.90') from dual;
  
  TO_CHAR(1234.40,'FM9999999.90')
  -------------------------------
  1234.40   
  

• How can I work with two icloud ID on the same pc?

  How can I work with two icloud ID on the same pc?

  Define "work".

  What exactly do you want to accomplish?

  You can use the iCloud Panel to connect to iCloud account and use a browser to go to icloud.com and sign in with another account.

• When you configure synchronization how sync manages information on two computers? It merges the information?

  When you configure synchronization how sync manages information on two computers? It merges the information?

  Hello!

  Yes, how Sync is that it brings together all the bookmarks and pushes them to all your devices. Same thing with the story.

  You will lose all the information in one of your computers.

• I want to move a large number of photos but don't want to unique, click each photo. I know there is a simple control function that allows to select groups of files with ' two'clicks ', as opposed to the selection of each file. Suggestions?

  I want to spend a lot of photos (they are in order) but and do not want to have to click to move each photo. I know there is a simple control function that allows to select groups of files with ' two'clicks ', as opposed to the selection of each file. Suggestions? I know it's apple 101, but I don't remember what order to press the button command, or shift, or other. Thank you

  Select the first file, then hold down the SHIFT key, and then click the last file. Or, select any file in the folder and then press command + A

• I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  Hi Eileen97933052,

  The PDF form must be extended drive in order to have this feature to save & print the form data.

  Please confirm by the PDF Creator is the PDF reader or not extended.

  Otherwise, if you have Acrobat installed on your system, you can reader extend PDF form yourself.

  Kind regards

  Nicos

• View all numbers with 2 decimal places.

  Hi all
  
  We have a requirement in our code where we want all numbers must be displayed to 2 decimal places.
  
  For example: If a number is 21.234 then it should be displayed as 21.23
  If a number is 21.289 then it should be displayed as 21,28
  If a number is 21 so it should be displayed as 21.00
  
  Can someone help me please how do in a SQL query.
  
  Kind regards
  Shruti

  Hi, Shruti,

  This shows a couple of things you can do:

  COLUMN     trnc     FORMAT     999999.99
  
  WITH     got_x     AS
  (
       SELECT     empno / 1000     AS x
       FROM     scott.emp
  )
  SELECT     x
  ,     TO_CHAR (x,            '999999.99')     AS tc
  ,     TO_CHAR (TRUNC (x, 2), '999999.99')     AS trnc_tc
  ,     TRUNC (x, 2)                              AS trnc
  FROM     got_x
  ;
  

  Output:

  `        X TC         TRNC_TC          TRNC
  ---------- ---------- ---------- ----------
       7.369       7.37       7.36       7.36
       7.499       7.50       7.49       7.49
       7.521       7.52       7.52       7.52
       7.566       7.57       7.56       7.56
       7.654       7.65       7.65       7.65
       7.698       7.70       7.69       7.69
       7.782       7.78       7.78       7.78
       7.788       7.79       7.78       7.78
       7.839       7.84       7.83       7.83
       7.844       7.84       7.84       7.84
       7.876       7.88       7.87       7.87
         7.9       7.90       7.90       7.90
       7.902       7.90       7.90       7.90
       7.934       7.93       7.93       7.93
  

  Column x is the number, such as SQL * more it displays by default. Note there is as many digits after the decimal point are needed.
  TC column shows how TO_CHAR can put in shape the number with exactly 2 digits after the decimal point. This automatically rounds the number nearest multiple de.01, so on the first line (for example) 7.369 gets displayed as 7.37.

  user11272043 wrote:
  ... If a number is 21.289 then it should be displayed as 21,28

  You (apparently) still want the number rounded to 0, then the tc column isn't quite what you want.
  Column trnc_tc is exactly what you asked for, with the number rounded to 0 (when a rouning is possible) and 2 digits after the decimal point.
  TC column is also exactly what you asked, but he uses the language SQL * Plus formatting rather than SQL. In addition, TRNC column is a NUMBER, while the column trnc_tc is a VARCHAR2, because TO_CHAR, as its name implies, returns a VARCHAR2.

  SQL * more order

  SET   NUMFORMAT  999999.99
  

  change the default format for all the number of columns. If you use it, you can ignore it for individual columns using TO_CHAR (since it returns a VARCHAR2, the FORMATNUM does not apply), or an order of the COLUMN. Also, if you use the VALUE FORMATNUM 999999.99, you must still explicitly TRUNC each number, otherwise 21.289 will come out as 21.29, 21.28. not.

• Digital formatting with Variable decimal places

  Acrobat 9 Pro, Windows XP

  I have created a form that has a number of text box form fields that must be numeric only by the applicant of the form. However, for any field data of this type, the number of digits that can be entered can vary from 0 to 3 and the applicant wants all decimal unnecessary to appear in the final output (for example, an entry "1.2" does not appear as "1,200"). The standard number formatting properties always show all decimals, so I know that it is not this way. No calculations will be made with one of these entries - the applicant form is simply enter data and then printing to make it readable for the end user.

  I know that the following line of JavaScript in the hit limit the digital input only Custom property, but how do I change the syntax to allow a decimal writing:

  Event.RC = (! event.change | / ^ \d$/.test(event.change))

  I probably also need a script to format for decimals, but I don't know where to look in the JavaScript for Acrobat QAnywhere or the JavaScript reference DND.

  Thanks in advance for any help.

  OK, here's a link to an example: https://workspaces.acrobat.com/?d=Xf5mboqmkpf-zRxB9MVAJw

  The code that is called in Format typing of the text events field and is in a JavaScript at the level of the document named "format". Post again if you have any questions.

• Display Total table with 3 decimal places

  Hi people,

  I wanted to display table Total for a column in the table with 3 Decimals.I have used the code below to set to 3 decimal places, but his does not work.

  In the application process:

  Formatter formatter = new OADecimalValidater ("#, ##0.000;(#,##0.000)","#, ##0.000;(#,##0.000)");

  OAAdvancedTableBean expTable = (OAAdvancedTableBean) webBean.findIndexedChildRecursive ("ExpenseDtlsRN");

  	If (expTable! = null)
  	{
  	OATableFooterBean footerBean = (OATableFooterBean) expTable.getFooter ();
  	System.out.println ("footerBean:" + footerBean);

  	If (footerBean! = null)
  	{
  	OATotalRowBean totalRowBean = (OATotalRowBean) footerBean.getTotal ();
  	System.out.println ("Formattotal:" + totalRowBean);

  	totalRowBean.setAttributeValue (ON_SUBMIT_VALIDATER_ATTR, trainer);

  	}
  	}

  Please help me I need very urgent.

  Hi people,

  I found the solution

  Formatter formatter = new OADecimalValidater ("#, ##0.000;(#,##0.000)","#, ##0.000;(#,##0.000)");

  	OAColumnBean ocb = (OAColumnBean) webBean.findChildRecursive ("column29816");
  	ocb.setAttributeValue (ON_SUBMIT_VALIDATER_ATTR, formatter);

  It worked for me