How to transfer data from one hard drive to another?

Similar Questions

• How to copy data from one hard drive to another after the upgrade?

  I have a HP e9220y, and I recently bought a new hard drive for it. There is nothing wrong with the former, but this one has a 64 MB cache and 7200 RPM so I hope it will be a little faster. I installed it and it works fine, but I want to copy all data from the old disk to the new so I can start everything off the faster hard drive and I seem to have a bit of doing wrong. I can't just copy and paste because of the Windows system files that are used. And last night when I set up Windows backup, and went to bed, when I thought it that Windows has recovered from a stop unexpected, rebooted, and only 2 GB of data saved obtained.

  What is the best way to move all the data from the old drive to the new drive, make it the default C: drive and move partitions system and factory_image as well? Thank you!

  Please read this link to another post made by Big_Dave and myself

  http://h30434.www3.HP.com/T5/desktop-hardware/hard-drive-imminent-failure-problem/TD-p/438567

  (1) If your old drive and the new drive is Seagate or Western Digital, then free House with their cloning software.

  (2) before starting the clone process, I found best to perform a disk cleanup and defragmentation.

  Cloning software to copy the two partitions. Example:

  Old drive 250 GB formatted to 232 C: created 220 and 12 GB D:

  New 1000GO drive formatted to 931 GB created 919 GB C: and D: to 12 GB

  The "Seagate disc Wizard" cloning software will let create you a clone automatic or manual partition resizing.

  The two modes to offer an overview of the actions before commit you. The manual on this page of Seagate (PDF) is 68 pages.

  After the cloning process he complete, all you have to do is swap on the disks. Besure to connect your new disc on the original motherboard SATA port.

• Transfer raw files from one hard drive to another

  Hi, my friend has had lightroom 6 v6.0 and wants to transfer its raw files on one hard drive to another and he asked me what he should do but I don't know, does anyone know how to transfer files from one disk to the other raw? Thank you!

  Hi johnboy,.

  Please see How to move your Lightroom Photos to another HDD - LensVid.comLensVid.com

  Here is another article Running Out of Space? How to move pictures to another hard drive. Lightroom training Laura shoe, tutorials and tips

  Kind regards

  Assani

• Transfer from one hard drive to another

  I transferred all my music from one hard disk to another. I want to be able to play these files from the new location without redownloading everything iTunes game or duplication of entries for the itunes files.  At the moment Itunes shows my entire library with the icon for download next to him. If I drag and drop files from the new location to Itunes, it creates duplicate entries.  I could re - download the entire library through itunes game, but it would be a big waste of time. I wish I could tell itunes to search my library in the new location of the directory. Is this possible?

  For general information, see make a library of portable split . If the library was already divided and you have moved the content from one disk to the other you can fix things by reassigning drive letters. Otherwise if you copy the library files and place inside press it then it should be as if you moved a portable library as a unit and everything should be back in place.

  TT2

• Help: How to transfer data from one form to another form form

  Hello:

  I was wondering how / if it is possible to transfer data from form from one form to another form. I create a flow of forms, which are as follows: form of Incident report-> form of risk analysis-> error-> report form decision support survey Standard-> report form of risk control-> form of mitigation-> etc... You get the gist. It would be very time-consuming to constantly transfer the standard who, what, when, where and how from one form to the other. I was wondering how do? I have looked around on the net and this forum and couldn't find a tutorial or a guide? Is this possible with Adobe forms?

  I use a XML schema for the form to preload a list of employees and the standard list information and then publish the form to submit in PDF format for opening and tracking form mobile device. I notice that I can export the data in a form that is distributed in XML but I can't import in a distributed form. I'm a newb with code, but may contain a little of my own.

  An example of how to achieve this with a field name or something would be greatly appreciated! If you need anything, or a copy of the forms let me know!

  Thank you kindly,

  Al

  Hi Al,.

  I have here an example where the data in a single form are 'communicated' to other forms. Please note that there are specific script in each of the forms. It's a work in progress and one day I'll come back make a more polished example: http://assure.ly/qQivbm.

  See also John Brinkman's blog for a different approach: http://blogs.adobe.com/formfeed/2010/07/shared_data_in_packages_part_1.html and http://blogs.adobe.com/formfeed/2010/07/shared_data_in_packages_part_2.html.

  Good luck

  Niall

• How to copy photos of LR from one hard drive to another?

  Hi, LR peut the photos to copy a hard drive to another?

  
  

  I need necessarily ...

  
  

  The first hard drive I'm a messand I would like to that If LR has copied all the pictures for the second hard drive and created a folder by date.

  Peut it?

  What would be you have me or recommended by another program?

  
  

  Thanks Tomas.B
  

  
  

  Tanuj Sandal said

  Please visit the following links: How to copy files to an external hard drive in Lightroom | Adobe evangelists - Julieanne Kost. Adobe TV

  Despite the title, this video explains how to MOVE pictures, not how to copy.

  There is no way to make copies of the photos using Lightroom, you can move the photos using Lightroom.

  jakubn26183962 said

  The first hard drive I'm a mess, and I would if LR has copied all the pictures for the second hdd and created a folder by date.

  Lightroom will result in no records per day, except when you import photos. If I could make a suggestion, leave your files in the same "mess" they are in now and use the keywords and other metadata to allow you to organize and search.

• Transfer Windows 7 OS from one hard drive to another

  I think of buying a new hard drive soon, but stumbled upon this question.

  I currently have a genuine Windows 7 operating system installed on my computer. I had initially installed Windows Vista , but I had bought and installed a Windows 7 Home Premium Upgrade.
  If I haven't bought a new hard drive (in the sense of higher data transfer rate), would I be able to pass all of my files and my disk Windows 7 operating system hard current to the new hard drive?
  Or I have to buy another copy of the 'easy transfer' Windows 7 Edition Home Premium and files?

  If you move a drive hard mechanical to another mechanical disk, so long that the reader who is replaced, equal or superior in size, it must be able to back up your installation and restore it on the new drive.

  How to pass Windows 7 on a bigger hard drive - Notebooks.com

• How can I move a photo library from one hard drive to another?

  How can I move my library of photos on a new hard drive?

  Make sure that the hard drive is formatted as HFS partition map + and graphics interfaces.

  Click and drag the full library to the current location on the hard drive.

• Can I use easy transfer to copy one HARD drive to another?

  My old pc is dead - I tried several things, including a new power supply, but finally gave up and bought a new pc Dell, Windows 7.  Can I take my old hard drive, install temporarily in the new pc and use the transfer tool to move my files and folders of old HARD drive to the new?  How?

  Why would you when you can manually copy in Explorer

  However, you need to take in hand the old data files.

  Windows Help will show how

• What is the best way to copy all the files from one hard drive to another?

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Use disk cloning software.

  The safest way is to use an external hard drive enclosure to maintain the new disc during the cloning operation.  These come with interfaces USB or e-SATA to IDE or SATA interfaces for the drive and the computer.  Be sure to get the correct type.  If you have an available internal drive Bay, you can put the new drive it for the cloning operation, but do NOT restart with two connected drives.  After everything was settled down, you can mount the old disk of 60 GB inside, format and use it for storage of backup.

  Cloning (copy to disc) software may have been bundled with your new drive or may be accessed free of charge from the manufacturer of the new command.

  Otherwise, here are a few apps cloning that I have used myself or have been recommended by members of the community:

  Acronis True Image Home
  Casper
  Paragon Drive Copy
  EASEUS Partition Master

• How to transfer data from one VI to another?

  I am doing a project on avoiding obstacles using a LIDAR and DaNI1.0 sensor. I have to separate my VI into two parts as the sbRIO Crash when I deploy my VI. I want to run the LIDAR data acquisition and obstacle avoidance part of my project on the laptop and send the resulting management frame to control movement VI on the sbRIO. I don't know how to do this. Can anyone help with this?

  I am sending data between the host and the real-time processor as my LIDAR sensor does not directly ineract with the FPGA. I want to use the TCP/IP connection, but I've never done it before and I find it difficult to follow the functions in LabVIEW and TCP screws. Are there examples that I can see to help me? I am using LabVIEW 2010.

• How better to transfer files to one external drive to another

  How to transfer files from one external drive to another?

  You can drag individual; or just select and drag as a group by holding down the Option key for you key keep on #1 Drive until you are sure that they all copied over correctly to Drive #2...  Or you can select all/copy/paste.    Do not erase the files from the first drive until you are certain that they all copied properly.

• How to transfer data from laptop to external hard drive?

  How to transfer data from laptop to external hard drive?

  my model is vgn-cr323.

  Thanks in advance

  Let me provide you with General information on how you can transfer data from your computer to an external drive.

  To transfer the data, plug the USB cable into the correct port. Usually, your computer will know that he has a new disc attached and a pop box up will warn you. It will scan to determine what to do with the new connection and your computer will assign a drive letter (for example, drive G: and so on.) This will allow you to transfer data to the external hard drive just like you would move files on your internal hard drive.

  Once you have the USB cable plugged into your computers port (and the other end plugs into the external drive) you can now start to save files you want on the external hard drive.

  Open the item (s) or folder (s) you want to transfer or save on your external hard drive. There are two ways to save external hard disk 1). If you have only one or two things to save, you can open each item, click on file / record under... and choose the letter/drive (for example, drive G corresponding to that of your external hard drive, click Save.) This he recorded on the external hard drive.

  For more information on your model Asia Pacific computer we recommend contacting Sony's Support Center in your area at http://www.sony-asia.com/section/support.

  If my post answered your question, please mark it as "accept as a Solution.

• Transfer data to external hard drive from XP to Vista

  How would I be able to transfer data from a XP hard drive (which is in an external case) on my new laptop with Windows Vista? Please let me know. Thank you very much.

  original title: I have a XP hard drive in an external case, and I would like to transfer the data on Windows Vista.

  There are several options:

  External drive is already connected via USB?  Your new computer sees the old disk when you open Explorer?  Is the drive external HARD in the format identical to the new machine Vista (probably NtfS)?  If this isn't the case, you must first convert the external hard drive to NTFS.  http://technet.Microsoft.com/en-us/library/bb456984.aspx (although written for XP, it works with Vista as well).

  If so, create a new folder on the new disc called 'From Old Computer'. Go to the old drive. Now * COPY * ("hold") the files to the new folder that you created. After getting everything copied on you can turn off the computer and unplugging the old drive to protect its content - where everything is not going according to plan.

  Now you can take your time by placing the files copied, where you want that they finally reside on your new computer.

  If you have problems with 'Access denied', follow these steps on the external drive of the new computer:

  In Explorer, right-click on the drive in question and select Properties

  On the Security tab, click Advanced
  On the owner tab
  Select you realize if it isn't already and
  Check "Replace owner of subcontainers and objects".
  Click OK twice (close all dialog boxes)

  Defines you as the owner of every folder and file on the disk

  In Explorer, right-click on the drive in question and select Properties

  On the Security tab, add your account if it is not already there and set full access
  Click on apply
  Click on advanced
  Check "Replace permission on the child all the objects with...» »
  Click on apply

  If you do not see a Security tab, then turn off Simple file sharing (you may need to do in reconnedcting the count to the old XP machine - I'm not sure that this can be done through the new computer).  To do this, see http://support.microsoft.com/kb/810881.  The same may be true if the nets and records are password protected (although using a different procedure to remove the password to protenctio similar to what lets you add it iin the first place.)

  If you have problems setting up the permissions or ownership on the disk external drive files and folders, some information here that might help:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  =================================================================================================================

  If the external hard drive is not USB but IDE instead, here is an article on two methods that work for transfer: http://www.wikihow.com/Transfer-Data-Between-Two-Hard-Drives.

  ==================================================================================================================

  I realide what follows is not what you asked, but if it is still possible, it might be a better solution than moving the data to the external hard drive.

  If the external hard drive has only the data and you want to transfer settings and data (and perhaps even of programs if they are compatible with Vista) from the old XP machine (if it is always present and contains information on the new computer (which is better because it also transfers your program and other parameters (and maybe your programs) as well as the data (or you can ignore the data if it is the same which is))) already on the external drive))), then use the transfer tool.  Here's how: http://www.windowsnetworking.com/articles_tutorials/Migrating-Vista-using-Windows-Easy-Transfer.html#.  This is how I do the trasfer if I had to do it because it makes the implementation of the new computer much easier and faster.

  Here is another article on how to transfer data and settings from an XP machine to a new Vista computer using an external hard drive (although it discusses other methods as well): http://www.digitaltrends.com/how-to/how-to-transfer-your-data-from-xp-to-vista/

  Jere het another article on the use of Transsfer easy to pass data or parameters (and perhaps programs) from a XP computer to a Vista computer: http://www.bleepingcomputer.com/tutorials/tutorial138.html

  =====================================================================================================================

  I hope this helps.  If you have questions or problems on the way, do not forget to post back and get help.  It is best to do things right the first time.  And even once, I highly recommend using Easy Transfer (although this is not how you setup at the moment) for the transfer to get the new computer up and running much faster and easier.  The decision is yours.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to transfer data from the 7 Millennium

  How to transfer data from the 7 Millennium

  You will need to manually back up your files by copying and pasting on a device from external storage such as a USB key or external hard drive.

  Then copy them on Windows 7: