How to trigger the fb message?

Similar Questions

• How to trigger the dictation from the smart keyboard on the iPad pro.

  I use dictated on my iPhone and my iPad quite often.

  However on my new iPad Pro with the smart keyboard attached, I do not how to trigger the dictation from the keyboard.

  I don't see how to get the soft keyboard back to press the button of the microphone are there, such space suggested by some on this forum.

  This doesn't seem to work in the latest iOS Update 9.

  I would be fine with a hotkey, or have to invoke the keyboard of the shop, then press the button of the microphone, but I don't see how do either.

  When the Emoji button on the keyboard smart strike as the keyboard, the software keyboard emoji is displayed, the space but when I press the soft ABC capital but I cannot get to the regular keyboard with the microphone button.

  A possible alternative would be to use Siri to dictation trigger in recording a memo or another application, space but I didn't understand how to do this job either.

  Has anyone experience this problem and found a solution?

  Unfortunately I had to spend a good hour on the phone with technical support when they finally admit that it was an oversight by Apple.  I hope someone reads this post until they spend countless hours trying to understand something, but has no solution at the moment. Frustrated!

• How to disable the annoying message "Printer cartridges no HP installed" on Windows 7?

  How to disable the annoying message "Printer cartridges no HP installed" on Windows 7? I have a HP Officejet 6500 has more and there is a way to disable those annoying pop ups. First of all, why HP can't fix their software to display only 1 message. If I turn on my printer, I get about 5 popups when the 3-minute delay. Is - this embarrassing? You bet, I do not turn off my printer more to avoid these messages. There must be a registry entry that I can delete gladly. Ideas? If you are an employee of HP, please do not give the Conference on "genuine cartridges" and how you take care of your printer. I've had my printer for 7 years and never had a problem with cartridges not HP. They are all made in China.

  This isn't a bad idea, but this does not resolve the issue. There are many complaints from customers about these annoying messages. All HP needs to do is to say to their developers to add a function to disable this feature. What is a marketing thing? Yes, it's a boring marketing question that should really be fixed. It's like Windows display constantly that your device drivers are not fully tested. Of course, when a customer buys a product at a lower price, they take this risk. I hate to be notified 365 days a year that my cartridges are not authentic.

• How to trigger the new numbering of the lines in a group?

  Suppose we have an ORDER_DETAILS table with columns (ORDER_ID, LINE_NUMBER, DESCRIPTION).

  We have these lines:

  order_id, line_number, description

  17: 1, "A".

  17.2, 'G '.

  17.3, 'R '.

  17.4, "Q".

  Next, it inserts a new line

  17.2, 'K '.

  How to trigger the renumbering?

  This should be the result after renumbering.

  17: 1, "A".

  17.2, 'K '.

  17.3, 'G '.

  17.4, 'R '.

  17.5, "Q".

  Then we move the line 5 to line 2.

  How to trigger the renumbering?

  This should be the result after renumbering.

  17: 1, "A".

  17.2, "Q".

  17.3, 'K '.

  17.4, 'G '.

  17.5, 'R '.

  This question is related to another discussion:

  https://forums.Oracle.com/thread/1088303

  create the order_details table

  (number of order_id,

  number of line_number,

  Description varchar2 (30)

  )

  rowdependencies;

  Start

  insert into values order_details (17, 1, 'A');

  insert into values order_details (17.2, 'G');

  insert into values order_details (17.3, 'R');

  insert into values order_details (17.4, 'Q');

  end;

  Select * from order_details by line_number

  ORDER_ID	LINE_NUMBER	DESCRIPTION
  17	1	A
  17	2	G
  17	3	R
  17	4	Q

  create or replace renumber procedure (number p_order_id)

  Start

  Update order_details od

  Set line_number = (select rn

  from (select rowid, RID,)

  / * for autocommit APEX active, etc. * / row_number() on rn (order of line_number, ora_rowscn desc)

  / * for autocommit = OFF favorite above row_number() (line_number order, nulls first ora_rowscn) rn * /.

  of order_details

  where order_id = p_order_id

  )

  where rid = od.rowid

  )

  where order_id = p_order_id;

  end;

  Start

  insert into values order_details (17.2, 'K');

  RENUMBER (17);

  end;

  Select * from order_details by line_number

  ORDER_ID	LINE_NUMBER	DESCRIPTION
  17	1	A
  17	2	K
  17	3	G
  17	4	R
  17	5	Q

  Start

  Update order_details

  Line_number = 2 set

  where order_id = 17

  and line_number = 5;

  RENUMBER (17);

  end;

  Select * from order_details by line_number

  ORDER_ID	LINE_NUMBER	DESCRIPTION
  17	1	A
  17	2	Q
  17	3	K
  17	4	G
  17	5	R

  Concerning

  Etbin

• How to add the warning message when you use the function 'print' in Adobe LiveCycle Designer

  I'm trying to make the pdf document for my business that requires the addition of a warning message while everyone to use the function 'print' page...

  Does anyone know how to add the warning message about LiveCycle Designer

  Also my supervisor mentioned something using "nag" If that sounds at all

  Not in the XML code, in the case of script of pre-publication of the "print" key. If you don't have the script editor to the top on your version of designer, you can press ctrl + shift + F5 to bring it.

• ODI: how to trigger the error return prior to loading in Essbase?

  Hi John... If you read my post, I want to say that you impress me! really, thank you for your blog.
  
  Today, my problem is:
  -J' received a poor quality of extract of ERP data file
  -J' saw the reference table (Source == > target)
  -> > How to trigger the error prior to loading in Essbase!
  
  My idea is this, (first of all, I don't know if it's a good thing, and also I have the problem to do in ODI!)
  -Step 1: make the JOIN between data.txt and cross-reference Table == > create a DATA_STEP1 table in the ODISTAGING schema (columns of DATA_STEP1 are adding data.txt columns than the table of cross references (... there more than 20 columns in my case))
  -Step 2: Control if there is no NULL value in the target column (NULL means that the data.txt file contains the value that are not defined in my Table of cross references) by using the filter (filter = Target_Account IS NULL or Target_Entity IS NULL or...)
  The result of this interface is sent to the queue of reject.txt - if reject.txt file is not empty, then a mail is sent to the administrator
  -Step 3: do the opposite: filter NOT (Target_Account IS NULL or Target_Entity IS NULL...) == > the result is sent in the DATA_STEP3 Table
  -Step 4: run correctly mapping: source: DATA_STEP3 (own and verified data!) with reference Tables and send data into Essbase - NORMALLY, it is not rejected record!
  
  My main problem is: what is the right IKM to send data in the DATA_STEP3 Table, which are the Oracle Table in my scheme of ODISTAGING or DATA_STEP1! I tone with Oracle IKM incremental update but I get error and in fact I don't need an update (which is a time trust), I just need an insert!
  "I'm just lookiing for a ' IKM SQL for Oracle...
  concerning
  Xavier

  Create a sequence in oracle, you use the sequence in the mapping of your target.

  < %="odiRef.getObjectName" ("l",="">","","< d="" ou="" w="">") %>.nextval"

  so, for example, it might be

  <%=odiRef.getObjectName("L","DATASEQUENCE","DATALOGICALSCHEMA","D")%>.nextval

  Make sure that you run the mapping target or intermediary.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• JDev 10.1.3.4: How to customize the validation message?

  Hello
  
  I am using JDeveloper 10.1.3.4 and want to customize validation error message but don't know how. Also, the error message is triggered off the base and needs fixing.
  
  On my page, I have a group of two radio button is set to required = "true", a message is added, and the two buttons and the error message are placed in a grid of three-column table:
  

  <h:panelGrid columns="3"
               binding="#{backing_student_doValidation.panelGrid1}"
               id="panelGrid1" frame="none">
  <h:selectOneRadio binding="#{backing_student_doValidation.selectOneRadio1}"
                    id="selectOneRadio1" required="true">
    <f:selectItem itemLabel="I Agree" itemValue="agree"
                  binding="#{backing_student_doValidation.selectItem1}"
                  id="selectItem1"/>
    <f:selectItem itemLabel="I Disagree" itemValue="disagree"
                  binding="#{backing_student_doValidation.selectItem2}"
                  id="selectItem2"/>
  </h:selectOneRadio>
  <h:message for="selectOneRadio1" errorStyle="color:rgb(255,0,0);"/>
  </h:panelGrid>

  When none of the buttons is selected, the validation error message is:
  

     O I Agree   O I Disagree   Validation Error: Value is required

  that is not quite user-friendly. I want the message to be: "you have to either agree or disagree. But how?
  
  Another problem is that the error message is triggered. What may be not presented above, is that this error is emitted above the buttons as if the error message is surrounded by the Exhibitor tag: imagine < font size = "2" > < sup > Validation error: it takes value negative > < / police >. I tried several (middle, base, low) values for the vertical-align property of the panelGrid but none has no effect. Is there a way to fix this?
  
  Thank you!
  
  
  Newman

  Hello Newman,

  It is strongly recommended to use the xml format of the jsp that is jspx. It's good to move to this format for all of the examples you will find only in this format. JSPX has nothing to do with panelPage or ADF Faces components. You can use pure standard JSF
  jspx format components. But I would suggest that you use ADF Faces components since they are compatible JSF and they provide the enriched functionality. Or you can freely combine JSF components and standard ADF Faces or even if you like another set of compatible
  You can import the tag library and also use JSF components.
  To return to your use case. Using the af:selectOneRadio instead of f: selectOneRadio component you can solve the problem with customization of message required validation by using the requiredMessageDetail property, but you will encounter :) problem of position of this message

  Kind regards

  Branislav

• How to activate the module message once per trigger event?

  I use the action to display a message and possibly send emails when a triggering event occurs, say that a temperature exceeds a limit.  Currently when a product (high TTL of a pre/post trigger) trigger module action continues to produce messages every minute in the message window, continues to send messages to the log file and would continue to send emails every minute if I had the Active Messaging module.  I wish I had the messgae displayed once.  Any help would be appreciated and thanks.

  You must use Rising Edge to the event, not TTL high. It has an automatic hysteresis because it seems to change from low to high, not only from top.

• How to trigger the value change in the structure of the event

  HII everyone, like the title, how should I trigger the value change event to display a message... Here is my connection... I want to trigger structure of the event to bring up the subvi, when the flame and the led are TRUE State... I have using the node property, but still not able to run event structure... How should I connect? Thank you very much...

  There are several ways you can do. First of all, you need to configure your sub - vi while he does everything you want when you run (in the properties of vi, top most window for example) and to make sure that it closes completely when you're done (when you click on the 'OK' button, for example).

  Spend you need an asynchronous call to the subvi. There are several ways to do so. My favorite one below. You go in the palette under 'Application control' and select a static reference VI. I like this approach because it keeps track of the way subvi for you, as long as the subvi is in the same project. Then, drag the sub - vi on the empty square which will be changes to your sub - vi icon. Then, you connect to an invoke node in the same palette under and select run VI. "Wait, that 's" set to false and the main VI will continue to function after the start of the vi of Sub. Together "Auto Ref" is the best way to go. Otherwise, you will need to follow the sub - vi reference and shut up yourself when you are finished.

  

• Even though I've updated to the latest version several times, I get messages from "update." How to stop the input messages?

  I get "upgrade to the latest version of Firefox" messages on my iMac, even if I downloaded the latest version several times. I'm afraid to click on the update message, because it might be spam/virus/whatever. Mozilla tells me that I downloaded the latest version of Firefox successfully. How to stop messages from appearing?

  Hello!

  Thank you to get in touch with us here at Mozilla's Support. I'll do my best to help you.

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  I see that you are running Firefox 25.0.1. Our latest version is the version of 26. But Firefox should display this update constantly. The screenshot is necessary so I can see if it's a legitimate link to Mozilla.

• How to fix the error message: xerces.dll is missing

  You try to view a dvd, but when I go to play the dvd, I get an error message: xerces.dll is missing.  How can I solve this problem?

  Hello

  1. what operating system do you use?
  2 are there any changes or updates made on the computer?
  3. are you able to read the DVD by cancelling the error message?
  4 is the issue limited only when you try to play the DVD?

  Try to play the DVD on another computer and check.

  Xerces.dll error message can be caused by corruption in the Windows System.

  Check out the link to use the System File Checker (SFC) tool to troubleshoot missing or corrupted system files in Windows 7.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should usually be your first troubleshooting step.
  http://support.Microsoft.com/kb/929833

• How to remove the original message in the body of the e-mail forward

  When e-mail is sent the original message remains in the body of the email. How I didn't remove that?

  Sorry, but I can't help with this program.
   
  Help for Windows Live Hotmail is located in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail?tab=all
   
  
  Help for Outlook.com is located in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/mail?tab=all
   
  
   
   
  
   

• How to fix the error message "unable to start Bluetooth stack service"?

  When I start my computer I get the following message: error: could not start battery Bluetooth Service.

  What is c?

  How can I get rid of him?

  How will this affect my Bluetooth?

  Hello

  (1) have you made changes before the start of this issue?

  (2) windows operating system you are using?

  (3) what is the brand and model of the Bluetooth device?

  You can get this error if the drivers are not updated, or if the driver has been corrupted.

  Method 1:

  Step 1: You can check if the same problem occurs in safe mode with network.

  Please follow the link on how to start the computer in safe mode with network below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Manually start the Bluetooth service.

  a. Click Start, type services.msc and press to enter.

  b. in the list of components, double-click Bluetooth support Service.

  c. change the startup type to automatic and click on the Start button to start the service.

  d. click on apply and then click ok.

  e. check if the problem persists.

  Method 3: update driver of Bluetooth device. Steps to update the device driver:

  a. click on start

  b. Select Control Panel

  c. Select system and maintenance

  d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)

  e. in the Device Manager, look for the Bluetooth device

  f. click on the driver tab, click Update driver

  Link for reference: updating a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest you to download and install the latest drivers from the manufacturers Web site.

  Let us know if that helps.

• How to get the last message received in the Inbox?

  Currently I am using the following code to the list of messages in the Inbox.

  Folder[] folders = store.list(Folder.INBOX);Folder inbox = folders[0];Message[] msgs = inbox.getMessages();
  

  But, how could I do the last message that was received in my inbox at the moment?

  I have a lot of unread messages in my Inbox and I can even receive the same message from sender twice at the same time, but I need access to the last message you received.

  Thank you

  As I have a implements FolderListener, I need to get the last message of FolderEvent object. But, I tried to access the last Inbox message, which will not always be there!

  Thanks Deepesh

• How to get the alert message while trying to open a file, folder, or drive?

  How to provide a warning message when opening a file, folder, or drive, such as I had in my disk recovery and back the file, but once I opened it, that message never came again, I want this parameters with some of my important files. so, how do you restore this setting? and how do you get to my files?

  Hello

  Thanks for posting the question in the Microsoft Community forums. According to the description, you need help to get an alert message when you attempt to open a file, folder or drive.

  The alert message you received disk and backup recovery file is supplied by the manufacturer.

  There is no message alert option in Windows. You can search for any third-party application, using your favorite search engine.

  Note:  This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Hope this information helps. For any help about Windows, you can still post on the Microsoft Community Forum.