How to update a column with 7 inputText on earpiece popupClose box
12.1.3 JDev
On the popup close listening port column on the home page is not refreshing.
In the home page, I have a column with inputText 7 and a link (all are within the same column).
When you click on the link, I'll open a popup.
Popup close listener I am affecting certain values the inputText 7.
but Popup close column is not refreshing.
I tried to link partialTrigger with the inputTxt boxes but did not work.
Also tried to make the main provision of the Panel including the inputTextbox group are surrounded, but not refreshing.
Thank you.
No difference if you call bindCreateTable.resetStampState () before programmatic refresh?
Dario
Tags: Java
Similar Questions
-
Insert/update the column with the clob data type
Hi all
ORCL Version: 11g.
I have a table with the clob data type.
Test12
(col1 clob);
I'm trying to insert/update to update the column with more than 4000 characters.
But due to the limitation of tank 4000, I could not Insert/Update.
Need your help in resolving this issue.
THX
Rod.
The limit of 4000 characters is incorrect. That pertains only to the varchar2 data type. A clob can hold more than 4 G.
Here is an example that shows how to insert it, I found...
Otherwise, here is a way 'dirty' to do.
insert into your_table (COLA, COLB)
values
(PRIMARY_KEY, PART 1 OF DATA)
;
Update your_table
Define COLB = COLB | PART 2 OF BIG DATA
where COLA = PRIMARY_KEY;
Update your_table
Define COLB = COLB | PART 3 OF BIG DATA
where COLA = PRIMARY_KEY;
.. and so on...
I don't know that I personally recommend the second style... But he could do the job.
-
How to fill a column with numbers and maintain when adding or deleting lines?
So far, I've discovered two ways to fill a column with the number:
1. Enter '1' in a single cell, '2' in the one below, select both, and then use the yellow dot to drag down - it will do the rest.
2 create a formula such as 'A2 + 1' and drag also.
However, in both cases it will work if I manually this continues to do for each newly added line at the bottom. Now, that alone would not be that big of a problem if it wasn't for the fact that I'm working with a table where the lines can be added among other rows in the future.
Having said that, could someone please tell me how to create a column with a number that will increase automatically? I mean - if I add a new line between line 56 and 57, I want the new line to have a '57"in it, and the" old 57 "would now be"58"and so on." " I don't want to drag the whole column, which can be hundreds if not more than a thousand lines.
Try to put this in the cells in the column:
= ROW()
In the formula, you can add or subtract a number if necessary to get the starting number that you need.
SG
-
How to update exists column on the table with the exact number and auto increment
Hello
I have a table with more than 10 million rows and there is a column called 'number_zaq', I want to update this column on line frist from 2000 and + 1 for the next all ranks.
Update your_table
Set number_zaq = rownum + 2000-1;
-
Update updated the columns with null are excluded from the DB adapter
Hi all
My fusion system interacts with DB2 using the DB adapter.
I have a script that I need to update a flag in the table after completing my bpel workflow. But by updating the value of indicator to "Processsed", there are other columns with a NULL value.
How to solve this problem. I don't want to do, the other columns should not be alerted.
Thank you
Richa
Hello
The issue has been resolved. In fact, I've updated the update statement, excluding items that couldnot be updated top link mappings. I had to create a new adapter and it worked.
Concerning
-
update of column with the number of sequence based on the condition
HelloVersion of DB: database Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
Here's the script to reporduce:
CREATE TABLE T2
(
PARAMLOCATION NVARCHAR2 (16).
PARAMTYPE VARCHAR2 (3 BYTE),
PARAMNUM VARCHAR2 (3 BYTE)
)Insert into T2
(PARAMLOCATION)
Values
('49');
Insert into T2
(PARAMLOCATION)
Values
(« 12 ») ;
Insert into T2
(PARAMLOCATION)
Values
(« 50 ») ;
Insert into T2
(PARAMLOCATION, PARAMTYPE)
Values
('loc51', 'B');
Insert into T2
(PARAMLOCATION, PARAMTYPE)
Values
('loc52', 'B');
Insert into T2
(PARAMLOCATION, PARAMTYPE)
Values
('loc53', 'B');
Insert into T2
(PARAMLOCATION)
Values
("loc54");
Insert into T2
(PARAMLOCATION)
Values
("loc55");
Insert into T2
(PARAMLOCATION, PARAMTYPE)
Values
('aoc01', 'I');
Insert into T2
(PARAMLOCATION, PARAMTYPE)
Values
('aoc02', 'I');
Insert into T2
(PARAMLOCATION)
Values
("loc58");
Insert into T2
(PARAMLOCATION, PARAMTYPE)
Values
("doc03", "DL");
Insert into T2
(PARAMLOCATION, PARAMTYPE)
Values
("doc02", "DL");
Insert into T2
(PARAMLOCATION, PARAMTYPE)
Values
("doc01", "DL");I should update the column in table (paramnum) function sequential paramtype as this: also you can not order in paramlocation, its like that paramlocation comes first start sequence ordering from there based on paramtype.
PARAMLOCATION PARAMTYPE PARAMNUM 49 12 50 loc51 B 1 loc52 B 2 loc53 B 3 loc54 loc55 aoc01 AI 1 aoc02 AI 2 loc58 doc03 DL 1 doc02 DL 2 doc01 DL 3 Please advice.
Hello
I'll assume you have a column called load_order, which corresponds to the order of the lines:
CREATE TABLE T2
(
NUMBER OF LOAD_ORDER
PARAMLOCATION NVARCHAR2 (16).
PARAMTYPE VARCHAR2 (3 BYTE),
PARAMNUM VARCHAR2 (3 BYTE)
) ;Insert into T2
(LOAD_ORDER, PARAMLOCATION)
Values
(1, '49');
Insert into T2
(LOAD_ORDER, PARAMLOCATION)
Values
(2, '12');
Insert into T2
(LOAD_ORDER, PARAMLOCATION)
Values
(3, '50');
Insert into T2
(LOAD_ORDER, PARAMLOCATION, PARAMTYPE)
Values
(5, 'loc51', 'B');
Insert into T2
(LOAD_ORDER, PARAMLOCATION, PARAMTYPE)
Values
(8, 'loc52', 'B');
Insert into T2
(LOAD_ORDER, PARAMLOCATION, PARAMTYPE)
Values
(13, 'loc53', 'B');
Insert into T2
(LOAD_ORDER, PARAMLOCATION)
Values
(13.2, "loc54");
Insert into T2
(LOAD_ORDER, PARAMLOCATION)
Values
(13.5, 'loc55');
Insert into T2
(LOAD_ORDER, PARAMLOCATION, PARAMTYPE)
Values
(50, 'aoc01', 'I');
Insert into T2
(LOAD_ORDER, PARAMLOCATION, PARAMTYPE)
Values
(80, 'aoc02', 'I');
Insert into T2
(LOAD_ORDER, PARAMLOCATION)
Values
(81, 'loc58');
Insert into T2
(LOAD_ORDER, PARAMLOCATION, PARAMTYPE)
Values
(82, "doc03", "DL");
Insert into T2
(LOAD_ORDER, PARAMLOCATION, PARAMTYPE)
Values
(83, "doc02", "DL");
Insert into T2
(LOAD_ORDER, PARAMLOCATION, PARAMTYPE)
Values
(99, "doc01", "DL");Any data type, this column is or what are the values it contains, as long as you can derive from the order of the rows of values in the column. (Of course, the values can be consecutive integers, only they do not have to be). If you do not have this type of column, you don't have any order to your lines, and what you request is impossible.
Since you have a load_order column, here's a way to get the results you requested:
MERGE INTO dst t2
WITH THE HELP OF)
WITH got_grp AS
(
SELECT load_order
paramlocation
paramtype
ROW_NUMBER () OVER (ORDER BY load_order)
-ROW_NUMBER () OVER (PARTITION BY CASE
WHEN paramtype IS NULL
THEN 0
END
ORDER BY load_order
) AS the grp
THE t2
)
SELECT load_order
paramlocation
ROW_NUMBER () OVER (PARTITION BY grp
ORDER BY load_order
), Paramnum
OF got_grp
WHERE the paramtype IS NOT NULL
) CBC
WE (dst.paramlocation = src.paramlocation)
WHEN MATCHED THEN UPDATE
SET dst.paramnum = src.paramnum
;
Results:
LOAD_ORDER PARAMLOCATION BY
---------- ---------------- --- ---
1 49
2 12
3 50
loc51 5 B 1
loc52 8 B 2
13 loc53 B 3
13.2 loc54
loc55 13.5
50 aoc01 AI 1
80 aoc02 AI 2
loc58 81
1 DL of 82 doc03
2 DL doc02 83
3 DL of 99 doc01
-
In DataGrid, how to fill a column with zeros (0) records?
Is there a simple way, in a DataGrid, for fill the records in a column with zeros (0)?
I have a DataGrid with two columns: colA and colB. ColA records values from a RemoteObject call. I need auto-fill (AutoFill) recordings in colB with zeros. How is that possible?
Thank you!
If you need to 0 in the dataprovider, once pass you the loop of result of the data provider and add a dynamic property with value = 0;
Something like that
var dp:ArrayCollection = event.result as ArrayCollection collection;
for (each var item: Object in PD)
{
item.demoValue = 0;
}Create a new datagrid column, set demoValue as datafield.
If it is just for display, add a new column, put an itemrenderer with label = '0 '.
-
Update of column with the rank on the parition
Hi, I have a table A given as:
MASTER_ID, CHILD_ID
100...
100...
100...
101...
101...
102...
102...
102...
102...
The initial values of CHILD_ID are garbage and should be updated as follows:
For each unique MASTER_ID the CHILD_ID should have values beginning with 1 (with lowest rowid)
so when this column is updated the table should look like:
MASTER_ID, CHILD_ID
100, 1
100, 2
100, 3
101, 1
101, 2
102, 1
102, 2
102, 3
102, 4
Select MASTER_ID, CHILD_ID,
Rank() over (partition by MASTER_ID order by rowid) as rank
a.
give the good ranking, but when I try to update the CHILD_ID with this rank
Update)
Select MASTER_ID, CHILD_ID,
Rank() over (partition by MASTER_ID order by rowid) as rank
of (A)
Set CHILD_ID = row_id
I get the error:
SQL error: ORA-01732: non-legal data manipulation operation on this point of view
01732 00000 - 'operation not legal data manipulation on this point of view'
Can you please help me with an sql update to set this child_id?
Thank youcreate table masta ( pk_id number, ch_id number ); insert into masta values (1, 0); insert into masta values (1, 0); insert into masta values (1, 0); insert into masta values (2, 0); ME_XE?merge into masta m 2 using 3 ( 4 select 5 row_number() over(partition by pk_id order by 1) rn, 6 rowid as the_rowid 7 from masta 8 ) m1 9 on 10 ( 11 m.rowid = m1.the_rowid 12 ) 13 when matched then update set m.ch_id = m1.rn; 4 rows merged. Elapsed: 00:00:00.14 ME_XE?select * from masta; PK_ID CH_ID ------------------ ------------------ 1 1 1 2 1 3 2 1 4 rows selected. Elapsed: 00:00:00.21 ME_XE?
Ideally, you do not want to fix the application so that 'unwanted values' are not met initially in the table.
-
UPDATE multiple columns with conditional parameters
I have a procedure that updates several columns of a table using the parameter of the procedure. Is it possible to have a update unique with the parameter SET conditional statement?
Is it possible to replace several IFs code to have only one UPDATE statement with the condition that update the column only if the parameter passed is not null? In the real world scenario, I have more than 3 columns and I do not want to write lots of IF blocks.CREATE TABLE TEMP (POL_NUM NUMBER, OED DATE, TERM NUMBER, TRANS_CD CHAR(2)); INSERT INTO TEMP VALUES (1, '1 AUG 2009', 12, 'NB'); INSERT INTO TEMP VALUES (2, '4 AUG 2009', 12, 'XL'); INSERT INTO TEMP VALUES (3, '2 AUG 2009', 12, 'RN'); COMMIT; CREATE OR REPLACE PROCEDURE TMP_PROC ( pPOL_NUM NUMBER, pOED IN DATE, pTERM IN NUMBER, pTRANS_CD CHAR2) AS BEGIN IF pOED IS NOT NULL THEN UPDATE TEMP SET OED = pOED WHERE POL_NUM = pPOL_NUM; END IF; IF pTERM IS NOT NULL THEN UPDATE TEMP SET TERM = pTERM WHERE POL_NUM = pPOL_NUM; END IF; IF pTRAN_CD IS NOT NULL THEN UPDATE TEMP SET TRANS_CD = pTRANS_CD WHERE POL_NUM = pPOL_NUM; END IF; COMMIT; EXCEPTION WHEN OTHERS THEN NULL; END;
Please help gurus!
Published by: Kuul13 on September 18, 2009 13:26Hello
Maybe this,.
Create OR Replace Procedure TMP_PROC( pPOL_NUM IN Number , pOED IN Date , pTERM IN Number , pTRANS_CD IN Varchar2 ) As Begin UPDATE TEMP SET OED = NVL(POED , OED ) , TERM = NVL(PTERM , TERM ) , TRANS_CD = NVL(PTRANS_CD, TRANS_CD ) WHERE POL_NUM = PPOL_NUM; Commit; Exception When Others Then Null; End;
Kind regards
Christian Balz -
[8i &; 10g XE] How to compare a column with the text of a column with numbers
This is probably a simple question, but I can't seem to find the answer. I tried variations on use to_number to_char and interpreters, all nothing will do.
The real problem is that I have a table with a column of numbers in a database 8i (datatype = NUMBER (3)) and a column with the text (datatype = CHAR (3)), and I need to compare two values.
This table has thousands of lines, but here's an example of the data in these two columns:
What I want to do is select the lines where the TXT and CHR VALUES do not match, then it would be (given my example):TXT CHR ----------- 001 1 001 2 002 2 XXX 1 003 3
But, I'm having difficulties in comparing two columns, because they are not the same type of data.TXT CHR ----------- 001 2 XXX 1
I tried to work on a simplified version of the problem in the 8i database both my 10g XE database:
But this also returns any line, and it isn't even the "XXX" in the text column to treat in this example.SELECT * FROM ( SELECT 1.000 AS nbr , TO_CHAR(1.000,'000') AS txt , CAST('001' AS CHAR(3)) AS chr FROM dual ) WHERE txt = chr ;
Can someone help me understand what it is that I'm missing?
Thank you!Hello
user11033437 wrote:
This is probably a simple question...Simple if you know the secret; maddening if you do not have.
... I tried to work on a simplified version of the problem in the 8i database both my 10g XE database:
SELECT * FROM ( SELECT 1.000 AS nbr , TO_CHAR(1.000,'000') AS txt , CAST('001' AS CHAR(3)) AS chr FROM dual ) WHERE txt = chr ;
Try:
TO_CHAR (1.000, 'FM000')
By default, TO_CHAR leaves place the beginning of the string to a sign less, in which case he should ever one, TO_CHAR (1,000, '000') returns makes 4 characters, not 3. "FM" in the format said TO_CHAR do not add a space.
If it does not, after the release of DUMP (txt) for the few lines that you can't match, so that we can see exactly what is in them.
-
How to update the table with the number management
Hello
I need as there is a loc_tab of the created table as below,
CREATE TABLE loc_tab
(
Country_ID NUMBER,
country_code VARCHAR2 (3),
country_name VARCHAR2 (50).
State_ID NUMBER,
state_code VARCHAR2 (3),
state_name VARCHAR2 (50).
city_id NUMBER,
city_code VARCHAR2 (3),
city_name VARCHAR2 (50)
);
I inserted records like below,
Now, I wanted to update the table such that all ID columns are updated with running number.COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME IND INDIA TN TAMIL NADU CHN CHENNAI IND INDIA TN TAMIL NADU TRI TRICHY IND INDIA TN TAMIL NADU CMT COIMBATORE IND INDIA TN TAMIL NADU MDU MADURAI IND INDIA AP ANDHRA PRADESH HYD HYDERABAD IND INDIA AP ANDHRA PRADESH SEC SECUNDRABAD AUS AUSTRALIA QLD QUEENSLAND BRI BRISBANE AUS AUSTRALIA TAS TASMANIA HB HOBART AUS AUSTRALIA TAS TASMANIA CCE CITY OF CLEARANCE AUS AUSTRALIA TAS TASMANIA BUR BURNIE
Each ID columns should get incremented so that, for Country_ID column corresponding to "India" If country_id is 1, that there must be one for all the lines with the name as "India". Likewise for "Australia".
In the case of State, she also has the same logic with numbers repeated until the very name of the State comes.
For the city, it of course will hold separate ID only because the name of the city will not get duplicated.
This update must be done in the normal way using simple SQL such as no PLSQL don't like looping, etc... is involved.
Here are the contents of the table, and that's how the table should be updated,
Thank you and best regards,COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME 1 IND INDIA 1 TN TAMIL NADU 1 CHN CHENNAI 1 IND INDIA 1 TN TAMIL NADU 2 TRI TRICHY 1 IND INDIA 1 TN TAMIL NADU 3 CMT COIMBATORE 1 IND INDIA 1 TN TAMIL NADU 4 MDU MADURAI 1 IND INDIA 2 AP ANDHRA PRADESH 1 HYD HYDERABAD 1 IND INDIA 2 AP ANDHRA PRADESH 2 SEC SECUNDRABAD 2 AUS AUSTRALIA 1 QLD QUEENSLAND 1 BRI BRISBANE 2 AUS AUSTRALIA 2 TAS TASMANIA 1 HB HOBART 2 AUS AUSTRALIA 2 TAS TASMANIA 2 CCE CITY OF CLEARANCE 2 AUS AUSTRALIA 2 TAS TASMANIA 3 BUR BURNIE
Shiva
-
How to update one column from another table
Hello
We have some sellers who are defined as employees but without employee_id for some reason any. So I would like to update the correct number of a view of HR records. Here is what I tried:
update of po.po_vendors x
Define employee_id = (select apps.per_people_v7 person_id y)
where y.first_name |' '|| y.last_name = x.vendor_name)
Error received: a row subquery returns more than one line.
If I use this instruction to check, I'm correct employee_id or person_id home:
Select apps.per_people_v7 person_id y, po.po_vendors x
where y.first_name |' '|| y.last_name = x.vendor_name
When I checked/compared with some old posts here, I could not just see where I did mistake. Please notify.
Thank you
Ning
Because for the same vendor id, you have a (employee id) id of the person twice in the target table. As Boneist said "fix data, difficulty of the request, fix the requirement...". »
How many sellers are there in your target table?
-
How to display 5 columns with blank lines
Hi Experts,
I need to display in the dashboard column 5 with blank lines. After download in excel I need to see the same thing as the names in columns 5 and that it must contain empty lines. It is one of the requirements of the user.
So how do you achieve...
Thanks in advance,
SitbonNext to all the answers of your son, you should see a button 'OK' or 'useful '.
Helpful = 5pts,.
Correct = 10pts:-)
Check the sticky thred:
http://forums.Oracle.com/forums/Ann.jspa?annID=939Welcome to the community, pls help others!
-
update of column with another column with in the same table
Hello
We are using oracle 10g,
I have a table with two columns i a s number one other data type is varchar2, varchar2 column contains
numAriques and data type character I want to move only numAriques to the numeric data type field data, please kindly give answer
Thanks and greetings
tmadugulaYou are not providing any version of the database, sample data or table desc, but anyway:
http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:3083286970877 #49518312679214
Something like:
create or replace function is_num (p_str in varchar2) return number as begin return to_number(p_str); exception when others then return null; end;
Which translates into:
MHO%xe> select * from bla; MY_VA MY_NUMBER ----- ---------- AAAAA BBBBB 11111 22222 CCCCC 33333 6 rijen zijn geselecteerd. Verstreken: 00:00:01.32 MHO%xe> desc bla Naam Null? Type ----------------------------------------- -------- ---------------------------- MY_VARCHAR VARCHAR2(5) MY_NUMBER NUMBER(5) MHO%xe> select * from bla where is_num(my_varchar) is not null; MY_VA MY_NUMBER ----- ---------- 11111 22222 33333 Verstreken: 00:00:01.73 MHO%xe> update bla 2 set my_number = is_num(my_varchar) 3 where is_num(my_varchar) is not null; 3 rijen zijn bijgewerkt. Verstreken: 00:00:00.51 MHO%xe> select * from bla; MY_VA MY_NUMBER ----- ---------- AAAAA BBBBB 11111 11111 22222 22222 CCCCC 33333 33333 6 rijen zijn geselecteerd.
-
OK, here's my situation...
I have a directory with 300 + JPG images in it; I'm hoping to use some (if not all) of these images for a project.
However, the project has very specific requirements for the image dimensions, resolution, and a representation of the colors; So I need to evaluate the supplied images to validate if they are all in line with these requirements.
If I right click on an individual image and choose Properties - then click on details, I can see the image information such as:
- Dimensions,
- horizontal resolution,
- vertical resolution, and
- color representation.
... which would be perfect if I had only 1 or 2 images to cross; but with more than 300 images, it becomes cumbersome.
So: I put the "Détails" view folder and added columns for dimensions, horizontal and vertical resolution resolution.
This helps my cause, because I can then sort the directory... and quickly see if the images are too small, too big, or unacceptable resolution.
However, I have not found a way to add a column for the representation of colors.
Is it possible to add a column for the representation of colors?
Hello
Unfortunately there is no other option to define the representation of colors in Windows Explorer. If you want to provide feedback about it, then check out the link:
Maybe you are looking for
-
I can't file my emails, what is the problem?
Dear Sir/Madam, When I want to drop a mail, I get the following message: Caveat! It is failed to post this message. Check your file name and try again later. It's strange. I use thunderbird for many years. My important emails I always file in the dir
-
Some Web pages displays the text as tabs, and vertical separators
I have this problem with Firefox where for some reason when I go to some random Web sites or even in my e-mails posted on the Web site is replaced by vertical and tab delimiters http://S29.postimg.org/r59ug5r1z/Firefox_Messed_Display.jpg But if I hig
-
How to download Mozillafirefox without a download button?
When accessing Mozillafirefox downloads for windows, screens come with instructions and a download example are not accessible.
-
I have Chinese characters in a queue (queues make supports Unicode)?
I am aware that there is a number of tools that allow the use of Chinese characters in LabVIEW. I have successfully built an application where I am able to switch between English and Chinese, as well as all text, buttons, screen etc multi-column list
-
can not change the brightness in windows 7 on SL500
Hello just installed windows 7 64 bit on my SL500. previously, I had vista 32-bit home. granted, everything works, but I can't change the brightness. its default value (which is 85% I think) I have the latest driver from nvidia geforce 105M display,