How to use as and between operators at the same time

Similar Questions

• How to use HDMI and plug headphones at the same time?

  I'm running to a HDMI projector (via a HDMI-DVI adapter) for video and Composite (red & white RCA) using the socket for headphones and a splitter cable to a receiver of older Theater-in-a-box type for audio. But when I plug the HDMI, the headset turns off - no sound. I've seen people describe the ways to solve this problem for older versions of Windows, but I have Windows 8 and I'm unable to find. Thank you

  Michel,

  Apparently, it is not possible to output sound via the HDMI and the headphone jack at the same time.  But if you want to watch the video via HDMI and listen via the headset follow these steps:
  Right click on the speaker icon in the task bar > left, click playback devices > right-click on HDMI > disable.
  It works for me.
  Rusty

• How to use vGPU and vSGA both on the same host vSphere 6.0

  I tested vGPU on a host vSphere 6.0 to 6.1 of the Horizon, and I would now add a vSGA pool to this host. Only two physical GPU is used with the two vGPU vm that I turned on.

  My question is, what should I do to make this Host allow compatible vSGA VM turning on and share resources on the other two other GPU?  I put the office pool to use the 'Material' 3D rendering engine and added a VM pool.

  When I try to turn on the virtual machine, I get this error message in vSphere client Web:

  "GPU hardware is required but not available. The virtual machine will not start until the GPU resources are available or the virtual machine is configured to allow software rendering. »

  It's the output of command line gpuvm and nvidia-smi:

  

  The host ESXi 6.0 has two cards of K2 of GRID for a total of 4 GPUS. Only two vGPU-enabled vm is turned on, it seems that I can use the other two GPU for vSGA VM, right?

  It is currently not possible since the Nvidia VIB:s vSGA and vGPU cannot be loaded at the same time.

  The driver will claim all compatible GPU:s (except those configured for passthrough, IE vDGA)

  An exception to this rule is if you have an AMD GPU for vSGA and a Nvidia GPU for vGPU.

  Can't comment on if, and when this will be resolved, perhaps krd can do.

  Linjo

• How can I use Adobe and a camera at the same time?

  I am a musician and I put to read sheet music and record with the camera to the IPad. But whenever I left the window of the camera and switch to Adobe agani, the camera stop recording.

  I can't save IM reading the notes of music at Adobe.

  I use Air from the IPad.

  Nobody helps me?

  Thank you.

  Hi Edusax,

  It seems to be the limitation of the device because it doesn't have the split screen function to use two applications at the same time.

  You will need two devices else you can print the PDF to read sheet music.

  Kind regards

  Nicos

• How to use more than one address at the same time?

  The Adobe server page that allows entry of a recipients address should not inform users how to add another address?  We separate them by semicolons? Commas?  Or is it still possible to use more than one address?

  Hi orison123,

  You talk about Adobe send? If Yes, you are absolutely right. Who should be written somewhere I had to double check and was able to send to multiple email addresses separated by commas or semicolons.

  Best,

  Sara

• How to make audio and video playback at the same time in movie maker?

  I've done some films with a flip camera and edited with Movie Maker.  However, when I played movies the sound does not match the video.  The sound was going faster.  How to synchronize the two together?

  Try to download windows media encoder 9 series, microsoft, download utilities

  also... Once installed, open it, select "convert video", change how data

  is to convert, convert a folder that you have created.

• I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see all at the same time, of

  Hello

  My name is Ellie and I am new to Dreamweaver.

  I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see everything at the same time, design, HTML and CSS?

  Thank you

  It ends up something like that...

  

• Impossible to use VMWare Server and Virtual PC at the same time?

  I have a Win 7 box I use VirtualPC (unfortunately, VPN to the employer only supports the 32-bit Win XP).

  If I try to start any virtual machines using VMWare Server, power on and then immediately off.  Tried several different VMs.

  However, if I disable VirtualPC, they all work normally.

  Then... there at - it a known issue with the help of Virtual PC and VMWare Server at the same time?

  BTW, I didn't see this problem when you use Virtual PC and VMWare Player at the same time.

  VirtualPC leaves the CPU of the exploitation of VMX root, which is a restricted mode.  VMware Server is problems to switch between legacy mode and long (this switch is prohibited when the CPU is in VMX root operation).  The current versions of the workstation and the player are able to circumvent this restriction.

• If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as a photoshop and illustrator, for example.

  If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as one for photoshop and Illustrator for example.adobe

  This excerpt from: terms of conditions of use Adobe software should help to clarify the terms for you:

  ..... You can activate the software on up to 2 devices (or virtual machines) at the same time, if these activations are associated with the same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.

  You can also see:FAQ: where can I find the terms of membership and the terms of use?

• I want to open two different pdf documents and view them at the same time so I can read about everything by watching the other document.  I use Acrobat DC and whenever I open a document it creates a tab and I can only examine a document at a time.

  I want to open two different pdf documents and view them at the same time so I can read a whole watching the other document.  I use Acrobat DC and whenever I open a document, it creates a tab and I can only examine a document at a time. Is it possible to display two or more documents without having to toggle tabs?

  Don't think that will work, but you can drag the tab to a new window. Each window can have a set of tabs.

• How to transform a layer object and a path at the same time?

  Hi all

  I know that I will start when you tell me the answer to this!

  I would really like to know if there is a way I can manage to transform a layer object and a path at the same time... or if there is no work around to get there.

  In a Word, for example I spend a VERY long time to create a drive complex around a very detailed object and then at the end note to what twisted and perspective, and would like to straighten.

  Of course I could turn and correct the object and then carefully turn the path - but it will not correct and I have to spend a lot of time the path of adjustment and make SURE, it is perfect.

  Are there not somehow, I was able to transform set?

  Usually, of course, I do all the correction to straighten and correct the perspective in advance, but in some cases after I am done creating the path I then notice that image could have used other adjustments.

  I appreciate all the advice you can get :)

  Thank you kindly,

  Christine

  Transform the layer and then target the way and make "Edit > Transform path > Again. If you make several changes on the layer, and then each time that validate you and leave transformation mode, remember to do the ' transform path > Again "to keep the layer and the synchronized pathname.

• What broadcast and Round Robin at the same time of the modes of distribution?

  Hi all
  
  as you know it some methods so that they were distributing data between consumer and producer of games. for ex: partition, hash, range...
  
  If you use one order by statement at the same time a statement that you will probably see the range method because the sets of consumption creates a range of order the lines and every time an execution in parallel to producer (parallel) server wants to send a row, he look for parallel processes of consumer who has an appropriate range of selection.
  
  but on the methods of dissemination and Round robin, I couldn't understand what they do and how to work Hey... I searched the documentation, but I couldn't find a document that explains their good. for ex if I write a select statement like this
  

  select /*+ parallel(sales, 4) */ * from sh.sales
  union
  select * from sh.sales2

  then I can see alternating in the execution plan.
  
  So what's "Broadcast" and what do do "Round robin".
  
  Thanks a lot for the answers.
  
  Edited by: elcaro on Sep 25, 2011 11:00

  in the method of Robin, a set of parallel processes to manage your data and process series send all data (she) up to the parallel treats each as a game of poker. in your example, manages the sales data in the table by the (process) parallel execution servers and sales2 table is managed by a process series (one).

  disseminate the method, a line sends to all the processes of consumption.

• can I play the guitar and midi keyboards at the same time?

  IM using the 3 main stage, I would like to play guitar and midi keyboards at the same time. I know that I can have more than one keyboard will at the same time, but I can't understand how to play the guitar too. I use a core Alesis 1 plug the guitar and a Keith McMillen 12 Step midi controller, he reads both just fine alone, but they play together. How can I get there? In addition, Im using a MacBook Pro OS X El Capitan.

  Thank you

  Mike

  You add a bunch of audio channels and affect the Core 1 Alesis entry?

  

  

• How user by VM (XP) can connect at the same time?

  Hello guys,.

  We test VMware View 4 and so far work fine, but I have a question? How many user by VM can connect at the same time? I test with 2 VM (XP) in the pool, but I want to use more than 2 users, but when I try to login doesn't say "no resources available", what that means is that a single user by VM? Us who is running Terminal Server and try to find alternatives.

  Thank you

  It's the same as with a XP machine. 1 single user can connect at the same time.

  André

• Should I iMatch and music Apple at the same time?

  Is there a point I iMatch and music Apple at the same time?

  These are two different services > iCloud library: understand the differences between music from Apple and iTunes game - Apple Support