How to use face recognition tool?

I bought a new Toshiba notebook, getting on ok with it.
Anyone is able to help me with my question is this, to use face recognition how I do it.

What I need to download something? I got the impression that he was already implemented.

All this is very simple. You want to protect your laptop with the face recognition tool. So it may happen that for some reason your face will be not recognized correctly but your laptop must always be protected.

In this case, you can enter Vista using password. This password must be initially created for your ACCOUNT of USER of VISTA. Later when you create account in face recognition tool this password must be the same. On this way the software makes control and compares password on behalf of law.

Can you imagine what will happen if a friend you create an account in the recognition of faces, and you don't know anything about. How you will be able to enter again in Vista?

So with this mechanism of self-control all kinds of misconduct will be prevented successfully.

Get you it now? ;)

Tags: Toshiba

Similar Questions

  • How to use facial recognition on Satellite P855?

    Hello

    I have P855-10j

    can I put a facial recognition for connection instead of password? How?

    Hello

    Instructions how to use face recognition tool you will find under
    Start > all programs > Toshiba > utilities > face recognition help

    Check it out.

  • Satellite A350 - which driver should I use face recognition

    Hello

    I have a Satellite A350 laptop and wanted to know what driver I need to install for the recognition of faces, because my manual is not something of this nature.

    Thank you

    Hello

    Computer laptop A350-xxx is this?

    You n t need any special drivers to use face recognition.
    Toshiba face recognition software is available on the European driver Toshiba page and it of designed for Vista OS.

    This tool must be installed on your laptop if you want to use.

    Here, in this thread, you will find details of face recognition and how to use it.
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=147434

    Check it!

  • How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

    How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

    Ashley,

    What about window > show the rectangle enclosing (Ctrl / Cmd + Shift + B to toggle)?

  • Satellite P300 - How can I change face recognition tool?

    I have a Toshiba Satellite P300.
    This laptop has the recognition of faces. There was an update on the facial recognition available so I tried to update the program.
    But when I tried I got the message that there is already an existing version of the program and I should delete this first version.

    So I tried to remove it using the remove program under Vista.
    But then I had the message 1628 has not finished the install script-based.

    So my question is: How can I update the facial recognition?

    In my opinion you n t need any update. Please test the functionality and if the face recognition works correctly, you should be satisfied with it.

    By the way: which version is preinstalled on your laptop now?

  • Satellite U400: How to set the BIOS password & learn how to use facial recognition

    I have a Satellite U400 Satellite.

    Can someone direct me to a link of support for the implementation in passwords in BIOS?

    There are several options and I don't know what does what...
    Thanks for your help...

    Another point:

    I feel that the definition of a password or both in the BIOS will help the face recognition program to work, for some reason any.
    I NEVER managed to properly configure that, although I tried several times,
    go in accordance with the instructions.

    A lot of frustration and time, I would say.
    This is for safety.

    > Can someone direct me to a link of support for the implementation in passwords in BIOS?
    If you want to set the password in the BIOS you will need to access the BIOS by pressing the F2 key immediately after that the laptop has been powered.

    There is a 3rd tab security.
    There you can set the BIOS password. You would need to put everything first and then you must confirm the password once more to

    > I have the impression that the definition of a word or two in the BIOS will help the face recognition program to work, for some reason any.
    This s the password of BIOS nonsense has nothing to do with the reorganization of face.

    Here's a very useful thread that provides details on the reorganization of the face:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=147434

    Check it out. It is very useful

  • How to use the Rectangle tool?

    I'm trying to use the Rectangle tool to make the spaces in my text. im making a navigation bar for a Web site for a member of the family.

    So I need to add dviders to go between each text link. I need to make selections 210 by 1 pixel using the rectangular sharp tool between each line and fill it with the color #1e1e1e.

    How do I do that? I'm not sure where to find these settings. im a turtial subsequently thats why its like that.

    Here is a picture of what im trying to do.

    photo 1.png

    any help would be thank you very much!

    How can I do this?

    Difficult to explain in a single forum post.

    Ideal if you publish your web site and post a link.

    Then, it comes to create a CSS-based navigation bar (there are a lot of tutorials - and tools/utilities to make the process easier - online) and tweaking the CSS rules to your taste

    An example: http://css3menu.com

    All of this is strictly off-topic for a Photoshop forum, of course. What web editing software do you use? Perhaps to bring the discussion.

  • How to use the gradient tool?

    I am having trouble using gradient tool! I do my level best understand how to fill in with the color of the specific area, but I don't get everything! Can Ode if you please help me? Or you can refer me any video link or some info where I can read and understand about that?

    Thank you

    Christie

    Hi Christie,

    You use the gradient tool to create a background, fill a selection or shape or something else? The gradient tool can be used in many different ways. Here are some videos for you started - if you try to do something more specific, feel free to post a reply!

    Design custom Gradients (04:44)

    Photoshop Top 40 #21 - tool degraded (08:42)

    See you soon!

    Kendall

  • How to use the Brush tool?

    I'm new here. I'm looking forward to my problems here and hoping that the experts will help me! I have questions about the Brush tool! How to use wisely?

    Warn the looks,

    Christe

    Hi Christie,

    Welcome to the forums, thank you for coming, and we're eager to help you here!

    This video, "Brushes 101" will on all the basics of tool brush for Photoshop CC:

    If you have an older version of Photoshop, don't worry, this video should be useful for the latest versions of little.

  • How to use the move tool in CS5 to put two images on an A4 sheet?

    Have recently updated from CS3 to CS5.

    I often print two images on A4 paper.  In CS3, I would simply adjust and crop 2 images to say ins 7 x 5 ins, after that put in place a new A4 size sheet (new file), then using the move tool, I propose the two images on the A4 sheet to separate and print.  Very well!

    Now under the CS5, once I've adjusted my first image and then try putting a second image with one I seem to lose one of the screen.  But on going back via the bridge and by clicking on the image, it appears again - problem is, I'm losing the second image.

    When I put it up a new A4 sheet, or pictures stay on the screen and there is nothing to move.

    Have been in preferences to see if there is something there to help, but nothing appears.

    Anyone know what is happening here and what I am doing wrong that is how to do 2 separate images on an A4 sheet?

    Thank you

    Bob Eveleigh.

    You may want to disable"Open Documents as tabs"and"enable floating Document window Docking" in the Interface preferences and the framework of the Application If you are a "old"Mac-user.

  • [After Effects] How to use "Convert Vertex Tool" for several vertex at the same time?

    Hey guys,.

    I used the "Convert Vertex Tool" to create a curve on a step of stairs and by mistake it curve all the point of my staircase which is what I wanted to do but point by point. I didn't know it was possible to point (s) at the same time.

    And now I keep it again. I want to convert all the points as a curve at the same time.

    If someone has the magic shortcut, please let me know.

    See you soon.

    uncurved.JPGall-curved.JPG

    It's all using the right tools.

    1. Select the layer with the path
    2. Select the tool pen (g)
    3. Press and hold Ctrl/Cmnd and place the cursor on any part of the path to select - you will see a solid filled small arrow
    4. Release the Ctrl/Cmnd key and move the path tool, so you can drag a selection around the verticies
    5. Hold Down the Ctrl/Cmnd key to reveal an arrow small white selection
    6. Drag your selected verticies
    7. Release the Ctrl/Cmnd key and press the Alt/Option key to reveal the convert vertex tool
    8. Click on any vertex to change linear to Bezier or vice versa

    This allows you to convert all the selected vertices. You can't click and drag, but you can convert it to a symmetrical set of Bezier curves.

  • How to use the crop tool without losing pixels?

    5616 x 3774 / res 72, is what CS5 says my Canon 5 d 2 large jpeg is off camera.

    Can I use the harvest too to make a picture of 20 "x 24" and keep all or most of these pixels? "

    Leave the area blank resolution?

    The lab I send the file to print, said they want 300 res files (just to complicate the thing a little more)

    Thank you!

    To tell the truth I do not use the crop tool. I use the selection Rectangle, crop image tool and the size of the image.  If you use the crop tool and fill a field of resolution in the crop tool crop tool makes all three operations including the harvest to the resolution that you have entered the resampling. Adobe also gave the crop tool implemented in CS6 that a lot in my arms. Don't mind at all.

    IMO if you use harvest its best tool to fill the field of the resolution. In this way the harvest will not resample.  You can enter height 24 20 width or height width 6 5 in fact the same proportions as it is 12:10

    After you do the crop you can use the size of the Image. In the dialog box uncheck resample set the width for printing on 24. You'll see Photoshop set a height 20 and set the resolution to a certain value. If the fall of DPI value below what you want check resample together in the desired resolution and interpolation method to use and then click OK.

  • In version 5, how to use the selection tool to move items?

    I can use the selection tool to select objects, but when I try to drag, nothing happens. My solution is to use the selection tool to select an object, then use the transform tool to drag the object in its new position. Any help is greatly appreciated.

    Start by restoring your InDesign preferences. Tutorial here:

    http://PFL.com/TRB

  • How to use the SQLT tool?

    Hello

    I have installed SQLT tool. But I don't know how to start with him. I really want to generate explain plans for one my SQL request using SQLT tool.

    Can you please help?

    And there is a book which has had very positive reviews: Oracle SQL Tuning with Oracle SQLTXPLAIN: Stelios Charalambides: 9781430248095: Amazon.com: books

    Concerning

    Jonathan Lewis

  • How to use the Brush tool effectively...?

    More specifically, I have a pic that is much darker show, a hay field and the end of the field is a hill on the island of trees.  In addition are mountains/hills, this is the high country of Colorado and on these hills are light patches of sunlight thanks to the handful of clouds.  I would like to put a little lightness to the left of the island for a little more definition and I can't really understand how to do it well, it comes out too light and that the border is no longer enough for my taste.  Any thoughts, good people?  I'm NEW to this game at this level.

    Hi James,

    Take the easy one first: pen. He comes to the edge of the shape of the brush. A value of zero pen gives you a sharp hard brush, with a good clear round edge shape to paint along the edges clearly defined as walls or signs. Affecting the pen to a higher value creates a soft or fuzzy border brush which is very subtle; You can not easily know where at the edge of the affected area.

    Workflow with a density control the intensity of the effect.

    Density determines the maximum amount of effective to apply - something less than 100 will result in a partial effect that may seem a little transparent.

    Flow of control the amount of effect to be applied with a single brush. Assignment of a low value like 10 or 20 (think it's percent) will allow you to put in place an effect on several consecutive brush strokes, for maximum effect that is equal to the value of density. So a flow of 20 would take 5 shots to build to whatever the density setting is maximum (100%).

    You can combine the two for very subtle effects. Density of 50 with throughput of 10 means 10 shots build fo up to the value of the total density of 50%.

    I hope this helps!

    Mike

Maybe you are looking for

  • How to stop the game unsecure information visit https sites?

    As ol ' IE fact when you visit https sites I'd like to interact only with information secure via a secure connection... Impossible to find a setting that allows me to do, ' cept for output/block sites.

  • Satellite Pro 4310 support - looking for Northbridge/Southbridge

    I have recently spoken of an old Toshiba Satellite Pro 4310. Currently, it's obviously a little slow and I am wanting to update is usable.I'll buy some more RAM and a new HARD drive for it. He is running Puppy Linux (that I installed) and seems to wo

  • Continuous Mac access vacuum superdrive

    My MacBookPro guard [loudly] access his empty superdrive drive. When I opened my MBP and randomly, sometimes... Can someone suggest a method to reset that stop at this?

  • 200 - 2h2wm: password administrator or power on password

    When I turn on my compiuter, I am invited with a "power on password or administrator". I have not set up a password and it cannot work around. When I try to enter a password, I end up getting the code: 85764024 Any help would be appreciated!

  • Arp s MS-DOS command prompt

    Trying to attack a NIC with the command prompt "arp s 010.010.014.100 00-20-4A-0B-1B-6B" and continue to be "ARP entry addition failed: 5" message.» Anyone know what this means?