How to use the book of fonts with fonts that are installed on the external hard drive

Similar Questions

• How to use the second HARD drive of Satellite A210 - BP1 for mirroring

  Satellite A210-BP1 came with 2 HDD (160 GB).
  Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
  This should be done without supervision and in real time - as a RAID 1.

  How can I do this?
  I also have Vista professional available and I would be willing to use 3rd party software as well.

  Thanks in advance for your answers.

  Hi Jan

  I doubt that this is possible
  Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
  Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

  Therefore, the final answer is; NO, it is not possible to use mirroring

  Concerning

• How to use the external optical drive as disc 2011?

  Hello

  I'm trying to use the optical drive of my iMac (super) dvd 2011 as an external drive for my new 2015 27 "iMac

  I plugged it but any time, I put a disc in the drive it runs for about 30 seconds and then ejected

  is there a software I need to install in order to use the drive?

  Problem solved I connect the external hard drive after starting the computer, open the drive must be connected before starting upwards

  works fine now

• Re: How to use the second hard drive in Satellite A300?

  I got a second hand Satellite A300 which was to be thrown out due to a defective DVD.
  I fixed the DVD and have a perfect system.

  On opening the box, I discovered that there 2 x 250 GB hard drives. I checked CMOS and show the 2 drives. However, Vista displays only the a drive.

  Excuse my ignorance, but how do I access to the second drive?

  I have Satellite A300 with two hard drives and each HARD drive has another operating system. Both hard drives are recognized correctly.
  I put t know what the problem is here, but the two hard disks should be recognized automatically.
  Try to set the BIOS to default settings and check again.
  Try to start the check and install Microsoft bootable disk if the two hard disks are displayed in Setup.

  I just hope that there is not a hardware problem.

• Satellite P70 - how to use the second HARD drive?

  I have recently bought a satellite P70 - A - 10 d.

  I see that there is no second location on hard disk, so I can install a second disk.
  You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

  But I can't understand how screed the disc.
  Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

  Hello

  If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

  Welcome them

• How to get the external hard drive to connect to VMWare Player?

  Hi all

  I currently have VMWare Player 3.1.4 and that you have a VM installed on an external SSD that works very well.

  The guest operating system is XP and host operating system is OpenSuSE 11.4.

  The problem is that I have another external hard drive that I want to connect to the virtual machine to store files and other (WD Scorpio Black 320 GB).

  So what I tried was when I opend VMWare Player, I went to add a new SCSI device, found the hard drive, I wanted to use and created it. But when I go in-> "VM" > "Removable devices" > "generic SCSI (SCSI 0:1) ' > 'Connect'-> I get the below error message.

  Device virtual scsi0:1: could not open the device host "/ dev/sdc": not sufficient permissions to access the file. Please make sure that the virtual device is configured to use a Linux generic SCSI device (/ dev/sg *), and that the physical device works normally on the host computer.
  Cannot connect the device virtual scsi0:1.

  Does anyone know if I'm doing something wrong? What are the permissions are they talking about?

  Thanks in advance,

  Matt

  Are back at the office and tested on a variety of Linux Ubuntu and was able to add a second drive HARD/dev/sdb as a physical and even disc was also able to boot from it even if it needs to be dismantled first and I had to start VMware Player using sudo, because I was using a standard account both add the disk and run the virtual machine with the added disk.

• How to access the external hard drive iPhoto library

  Hello

  I'm trying to access my iPhoto library that is on my external hard drive.  I try to free up space on my MacBook and want to make sure that I can still pick up stuff if I want to from the outside. I get this message (photo).   OK let me download a photojeeeeeezzzz... You have made changes etc, a newer version of iPhoto... .do you want to leave a use of the latest version, or creat new version etc,... I want to just access my library of tha hard drive...   All ideas

  Heres the phot o

• How can I get WMP to find all my songs that are stored on an external hard drive?

  I bought an external hard drive to store music for my product and WMP adds only about 30% of the songs to the Player library.  Some are wma and some are in mp3 format (added to the library and which must still be added).  I tried to uncheck Read-only after reading some responses online, but who did not stick and nothing changed.  How can I get WMP to find all my songs?

  I couldn't change them to read-only.  Fortunately after the computer restarts several times it work itself.

  Thanks for all the tips!

• How to use the 2nd hard drive internal for storage?

  Hi, I am a newbie in all of this. I would use the 2nd internal hard drive of our mac mini server (end 2012) for storage (in fact, I'll things rsync from a remote server to here. but this is not the point here.). The thing is, I don't know how to access the 2nd internal hard drive and where to start. I did all of the following commands in the Terminal, but I don't really know what they mean, and what can I do with this information. I've been Googling but most are guides on how to install a 2nd hard drive etc. I hope that the information below is enough for someone to give me advice please?

  Thank you!

  

  

  

  That shows disk utility?

• External hard drive does not work on windows 7 after using the external hard drive on a mac (osx 10.7)

  title says it all. It does not open on autoplay and does not anywhere, but is always works on mac

  http://www.Mediafour.com/products/MacDrive

  If you want to use the drive to read and save files on both mac & PC I think that you will need create separate partitions on the disk, a formatted for mac and one for the PC.

  The utility linked above only allows access to a mac formatted drive and access the data, having never had to use it I don't know if it allows you to save files PC to the mac player

• -macbook pro 128 GB of storage space, I do not want to use the external hard drive, can I put my storage space in 512 St 1 TB?

  Hi, I have a macbok pro 128 GB and I'm done with the space... so now I won't wear my external HD everywhere wherever I'm going, so I put my storage from my macbook to 512 r 1 TB?

  Yes you can, however by doing so, you will cancel the guarantee of the Ant or Applecare that you might have:

  https://eShop.MacSales.com/shop/SSD/OWC/MacBook-Pro

  There are other options available as well.

  Ciao.

• Windows 8 cannot connect to the external hard drive after you have added the drive case.

  Original title: I have my hard drive from my previous PC attached to my new PC with windows 8. My old PC had XP. How to access the external hard drive?

  I had problems with my XP operating system and could not transfer all the files to my new PC. I spoke with Dell who I believe created the problem with software support. I was told to get out the hard drive, buy a hard drive enclosure and get my files from there. I can't find the hard drive.

  Hello

  Thank you for the update.

  Given that the problem occurs when the hard drive is connected to a different USB port or another computer, it is probably related to the connection of the hard disk.

  Method 1: check if the problem occurs in another computer after removing the hard disk enclosure.

  Method 2:

   

  Step 1: Check if the hard drive is detected in Windows Explorer.

  To do this, follow these steps:

  a. connect the hard disk of the computer.

  b. press the Windows key + E to open Windows Explorer.

  c. check if the hard drive is present here.

  Step 2: Check if the hard drive is detected in disk management.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + X , and then select disk management.

  b. check if the hard drive is listed there.

  Contact the manufacturer of the hard drive and hard drive enclosure for assistance.

  http://www.Seagate.com/support/

  Please get back to us if you have any other questions about Windows operating systems. We are happy to help you.

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?

• Lightroom does not recognize the external hard drive used with your old computer.  gives it a new drive letter.  How can I do understand that it is the same as that?

  Bought a new computer.  Lightroom cannot find the photos that have been saved on external hard drive because lightroom gave a different drive letter.  How (H) instead of (E).  How can I merge them without doing a full import?

  In Windows, you can change the drive letter e (Besides, isn't Lightroom, in doing so, is Windows)

  Change, add, or remove a drive letter - Windows help

• How to use the SDLT tape drive in the guest OS VM

  Dear

  now, I have HP DL380 G5 Server running windows 2003 Ent. with bus adapter host SC11xe PCI - E HP which directly connected tp SDLT Tape Drive as backup server and use for the backup operation.

  I want to move the physical backup to host vmware server and EMC AX4 allows you to have a backup online and allows you to take backup offline, SDLT tape drive

  My question is how I use the SDLT tape drive in guest OS vm and vmware knows "HP PCI - E SC11xe Host bus adapter" or not.

  Please let me know how to do this.

  Kind regards

  Mahdi Bellavia

  I have a G5 DL385 (AMD of the DL380 version) with a DLT3.   I use an Adaptec 29320LPE, appearing on the compatibility list.  We plugged a HP Ultrium 920 changer using the 'old method' SCSI passthrough.  We bought the Adaptec card, because we used initially ESX3.5.  We are now on ESX4.0, but for various reasons, the configuration left the same, so I have not tried with VMDirectPath I don't know if it is possible to use the SC11ex card, but if you arrive VMDirectPath at work, it seems then you need another SCSI card.