How to use the device as a simulator.

Hi all

Can someone tell me how to use the device (with my development pc) as Simulator.

Whenever I need to check the appilcation in device of signed files .cod that is compiled in the Simulator.

Because I got the outofmemory error in the device rather than simulator.

   

Thus, any solution which signed without how can I check my direct request to the device itself. Any setting in preferences or etc...

Thank you

Tejas

        

Advertisement

The only way you should not sign the cod is if no controlled classes/interfaces are used. The easy way to find out is to open the SignatureTool and see if your application requires signature. Otherwise this says icefrost1 's good enough solution.

Tags: BlackBerry Developers

Similar Questions

  • How to use the recovery CD?

    Hello

    Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

    Can anyone help please?
    St. Clare

    Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

    Richard S.

  • Manual or how to use the ExpressCard Remote control Mobile HP Media Center

    My HP Pavilion dv7-1448dx-product # NV213UA #ABA.
    I'm running Win 7 Ultimate x 64 OEM.

    I searched HP and found 1 photo of my card ExpressCard Mobile HP Media Center remote control, I found all the descriptions of component and everything BUT how to use it?

    Where can I get information on how to use the "card ExpressCard Remote control Mobile HP Media Center"?

    Deborah M souls.

    Deborah M souls

    Hello

    Are you talking about the next device? How to install and how to use information is here:

    Express Card Media Center

    Kind regards.

  • How to use the NI USB-6525 digital filtering feature?

    Hi can someone tell me how to use the 'digital filtering' feature of the NI USB-6525 device? How can I set up the device to turn on? Using LabVIEW or NI MAX?

    It is configured using a DAQmx property node:

  • How to use the webcam

    I have an Acer laptop AS 5740, I'm useless with all the technology, can someone tell me how to use the web cam it please?

    Hello

    If it is a built-in webcam, the instructions for use of the device will vary between manufacturers.

    Your best resource for this information is Support of Acer.

    Here is a link to the product page for your computer. This page contains all the documentation for this system and devices.

    Acer support: downloads & Documents - Support Notebook / sucks / Aspire 5740:
    http://support.Acer.com/us/en/product/default.aspx?tab=2&modelId=1870

    If you cannot find the information in this location, use the following link to request to Acer.

    Acer Support - answers, E-Mail, Chat - find answers: http://acer.custhelp.com/app/answers/list

    Concerning

  • How to find the device ID?

    How to find the device of my CAN ID card and RIO (or card for something else)?

    I use MAX 4.5 and LabView 8.6.

    Thank you.

    Open MAX and go to the section:

    My system > devices and Interfaces > NOR-DAQmx

    It should list all your DAQ devices and say something like

    DAQCard-xxxx: "Dev 0.

    DAQCard-xxxx: "Dev 1.

    etc.

    Just look at your device

  • My Windows Vista laptop (dv9000 HP) is unable to update the drivers for the drive DVD-cannot use the device.

    The above mentioned laptop displays error Code 39 in Device Manager. I tried to remove the device and scan for hardware, but not able to download the drivers needed to use the device. Help, please. Thanks to you all.

    Hello

    Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

    There are many causes of Code 39 errors in Device Manager:

    a. a required device driver is missing.

    b. a required binary file is corrupt.

    c. There is a problem with the file I/O process.

    (d) a pilot that refers to an entry point in another binary file cannot load.

    The recommended solution is to remove the device and reinstall the drivers for this device. As you have tried this step, I suggest you to try the steps mentioned below and check:

    Step 1:

    Try the fixit mentioned first and check if the dvd player works:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Step 2:

    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista

    http://support.Microsoft.com/kb/929461

    Step 3:

    Try the steps in the following link and check if the dvd player works:

    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/314060

    If you have any questions do not hesitate to answer, we would be happy to help.

  • Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

    Original title: problem ejecting USB Mass Storage Device

    When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

    Hi a. Cook,

    (1) how long have you been faced with this problem?

    (2) is limited to any specific USB device?

    This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

    Method 1:

    (a) Download Process Explorer from the link below

    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

    (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

    (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

    (d) find the process and its PID (process identifier) in the following box.

    (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

    (f) press Ctrl + H to display the handles in the view in the lower pane.

    (g) find the file according to the drive letter and right click, choose Manage close.

    Reference:


    Problem ejecting USB mass storage device
    http://support.Microsoft.com/kb/555665

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Method 2: You can see the steps in the link below by Diana d.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

    Method 3: A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

  • How to use the queue data Structures stack?

    Hi all, you can tell me how to use the queue, stack, the link in the list... Structures of data in the project of BlackBerry? Thanks for any suggestions!

    BlackBerry devices are not java desktop running. you are limited to the blackberry api, basically j2me + rim extensions, based on java 1.3/1.4 (no enums, no generic, many collections not impl etc.).

    Remove your JRE6 and change your code until there is no more error.

  • How to get the device Diagnostic report?

    Hi guys.

    Do you know how to get the device Diagnostic report?

    Is this possible on a Simulator?

    Thank you.

    Hi guys.

    I found the way how to get.

    It's easy.

    In order to get the diagnostics test report, go to Options / settings-> Network Mobile-> select "diagnostic test" in the menu-> then 'run '.

  • How to use the parameter B-BIS in a factory of connections

    How to use the parameter B-BIS in a factory of connections (OS 5.0)?

    I have found no no API for it.

    Maybe http://www.blackberry.com/developers/docs/7.1.0api/net/rim/device/api/io/transport/options/BisBOptio... ?

  • How to get the device model, for example app works on PlayBoook or BlackBerry 10?

    How to get the device model, for example app works on PlayBoook or BlackBerry 10?

    You can use this class: http://goo.gl/GtMLP for information on devices

    something like this:

    String myDeviceModel = android.os.Build.MODEL;
    String myDeviceBrand = android.os.Build.BRAND;
    String myDeviceDevice = android.os.Build.DEVICE;
    
  • With no headphone jack, how to use the iPhone in my car 7

    Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

    So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

    Thus, looking for ideas that might have people.  I can't be the only one with this concern.

    It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

  • How to use the capture and the print button

    I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

    Thank you

    Andi Starbuck

    That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

  • How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

    How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?

    Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

Maybe you are looking for

  • Installation of Windows XP on a Satellite L40-14B

    I bought a toshiba Satellite L40 - 14B with nothing on it, and I can not install xp on it because the hard drive is sata.Can someone help me pls? I don't have a usb floppy drive. Where can I find the driver for the hard drive and how do I add it for

  • Chess Titans works fine on my pc windows 7, but not on windows XP

    Chess Titans works fine on my pc windows 7. I managed to find a copy of the titans of chess for my little Asus XP runnuing, I take with me on a trip. The problem I have is that there is no way to play as the first to have black. It is in white by def

  • Vista-Security Alert-Malware Protection & Defender

    I use Avira AntiVir Premium as my anti-virus program.  There has been no problems so far but when I turned on my computer yesterday, I received an alert Windows Security Security Center Windows says that Windows did not find antivirus software on thi

  • Software BlackBerry Sync Notes and my tasks with Outlook

    Sync BlackBerry limited to synchronization of calendar and Contacts.  When is applied ability to sync tasks and notes?

  • BlackBerry Z10 Z10 drops off network when full load

    My phone frequently falls network (Orange) when he finished filling, returning on the emergency calls only. Market seems clear about this. I did a reset of the device and have reinstalled the operating system (10.1.0.2312), but the problem persists.