How to use the modules of the series and two different bitrates in FPGA mode on cRIO 9075

Similar Questions

• How to use the capture and the print button

  I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?

  Thank you

  Andi Starbuck

  That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?

• How to track the message to two different queue using jms proxy service

  Hi all
  In my project, I need to listen to a jms queue, then forward the messages to the queue of two different.
  Now, I already have a proxy for listening to the queue and then pass it to another queue using business service, it works.
  But how to forward messages to two different queues in the same workflow process using a proxy and bs?
  
  or in any other way?
  
  Really thanks in advance.
  
  Kind regards
  
  Kahlil

  You can use actions to publish in the pipeline to achieve this.

• How to use the conditional and made mandatory

  Hello
  
  I need to use the conditional and made mandatory something jspx page. Following line gives an error:
  
  rendered = "#{Bindings.type.inputValue! = 'abc' & & bindings.proofId.inputValue! ="} ' "
  
  Error: Name expected instead of &.
  
  What is the right way?
  
  
  
  Note: I use Jdev 10.1.3

  Boring, but you can use & #38; & #38; (remove the space after the &) for this.

  Timo

  Published by: Timo Hahn on 24.11.2009 08:46

  Published by: Timo Hahn on 24.11.2009 08:48

• How to use the values acquired by different treatments with 9188 OR cDAQ

  Hi guys, I'm trying to use NI DAQ 9188 chasis with temperature measurement module 9214. I plugged in 3 modules to the module and split signals. But I'm not sure that I can easily these values in functions. I'm trying to convert them into table 1 d, but when I converted the table 1 d I can't see the values and use separately from each other. For example, I simply multiply the first value of 1 thermocouple. How could I do that. In addition, the signals in the waveform table 1 is not smooth. What is the reason for this? Thanks in advance.

  Hi James-D,

  Thank you. Now, it is clear to me.

• How to use the rescue and recovery and product recovery discs?

  Hello world

  I just recently became a new owner of a T61 and really enjoy. I did have a chance yet to test the hotline of lenovo, as I've not yet screwed anything up if badly needing their help. I tried a factory clean reinstall from the service partition and it worked fine. I would like to know, how one uses it the rescue and the recovery boot disk and the recovery disks of the product I created myself? From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  art140 wrote:

  From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  1. Place the rescue and recovery disc in the drive, and then restart.  This disc contains the same program that you used when you restored your system from the service partition.  Once the program is loaded, you will see the same screen with the same options as before.
  2. Choose to restore your system as you did with the service partition.  You will not see an option to do a custom restore.  When the program is run from the disk, it automatically performs a full restore.
  3. The program will rebuild the service partition and copy the program files on him.  When you are prompted, insert the product recovery disks.  The compressed system and application files contained on these discs will be copied to the new service partition.  Once the copy process is completed, your system will be restored from the service partition.
  4. After restoration, you will be able to make a new set of recovery discs if you wish.  You will also be able to do a restore custom through the service partition.

  Don

• How to use the case and decode to extract data

  Hello gurus of PL/SQL,.
  
  I use Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64-bit Production version
  
  I have a table in the following form-
  

  drop table TT2;
  create table TT2(College, Class,gender,status,fees) as select
  'IITB','MBA','M','P',255600 from dual union all select
  'IITK','MTech','M','P',300000 from dual union all select
  'IITD','MBA','F','P',450000 from dual union all select
  'IITKH','MBA','F','P',350000 from dual union all select
  'IITC','MTech','F','P',420000 from dual union all select
  'IITB','MTech','M','P',185000 from dual union all select
  'IITC','MTech','M','P',235000 from dual union all select
  'IITD','MBA','F','F',175000 from dual union all select
  'IITM','MBA','M','F',257000 from dual union all select     
  'IITKH','MTech','F','P',335000 from dual union all select
  'IITD','MBA','F','P',540335 from dual union all select
  'IITC','MBA','F','F',125089 from dual union all select
  'IITD','MTech','M','P',290756 from dual union all select
  'IITM','MBA','M','P',200000 from dual union all select     
  'IITKH','MBA','F','F',534990 from dual union all select
  'IITD','MBA','F','P',221000 from dual ;

  certain conditions of extraction are as follows-
  
  MATTER OF STATE
  College of 'IITB' and status = 'P'-'good WestRegion '.
  College of 'IITC' and status = 'P'-'good SouthRegion '.
  College 'IITD' and 'IITK' and status = 'P' and type = 'F' - 'female NothRegion spent.
  College not in 'IITK' and status = 'F' - 'Ex Kanpur Failed'
  
  Results-

  Region Statnding     Fees
  WestRegion Passed     440460
  SouthRegion Passed     655000
  NothRegion Female Passed     1386335
  Ex Kanpur Failed     1092079

  Used SQL
  I use the following query that only make sure of the case, but it's not how I want to exit, if I try to use the case to breast to decode then how to work on it.

  SELECT (CASE WHEN College in ('IITB') and status='P' then sum(fees) else 0 end) WP,
  (case when College in ('IITC') and status='P' then sum(fees) else 0 end) SP,
  (case when College in ('IITD','IITK') and gender='F' and status='P' then sum(fees) else 0 end) NFP,
  (case when College in ('IITK') and status='F' then sum(fees) else 0 end) ExKF
  FROM 
  TT2
  GROUP BY College, Class,gender,status

  SELECT CASE WHEN College in ('IITB') and status='P'
                      then 'WestRegion Passed'
              when College in ('IITC') and status='P'
                      then 'SouthRegion Passed'
              when College in ('IITD','IITK') and gender='F' and status='P'
                      then 'NothRegion Female Passed'
              when College in ('IITK') and status='F'
                      then 'Ex Kanpur Failed'
              else 'Others' end region_standing,
              sum(fees) fees
  FROM TT2
  GROUP BY  CASE WHEN College in ('IITB') and status='P'
                      then 'WestRegion Passed'
              when College in ('IITC') and status='P'
                      then 'SouthRegion Passed'
              when College in ('IITD','IITK') and gender='F' and status='P'
                      then 'NothRegion Female Passed'
              when College in ('IITK') and status='F'
                      then 'Ex Kanpur Failed'
              else 'Others' end;
  

• How to use the Fusion and my whole bootcamp partition?

  Here's what I want to do...

  I have a bootcamp with Windows XP partition on this already...  I installed merger and created a brand new Windows XP on it and everything goes smoothly.  There are times when I want to start windows in my score so I can play my games without having to run two operating systems at the same time.

  I was able to do this with Parallels for a long time, but I have since then switched.  My question is...  How to use my bootcamp with merge partition?  I just want to be able to run Fusion when I'm not playing games, and when I am, simply restart so I can get my complete resources of computers.

  Well, the reason why you did not see the Virtual Machine library window was because the Windows XP Home Edition virtual computer is configured to start automatically when the merger opens such indicated by the orange and white star.  By clicking on the orange/white star if he stops automatically load and clicking on the blue/white star it will become orange/white

  Just a little note... The CONTENT on Bootcamp is not what I want to use. I want to use Windows XP from VMWare Fusion I have done, but on the training camp of partition.

  Based on what you said it sounds like what you want to do a (Virtual, physical) V2P transfer and while this is feasible technically is not necessarily a simple process and V2P requires that the source properly prepared to be transferred to a different material and then an Image created, and then loaded into the Boot Camp partition.  It is outside the scope of his abilities and VMware Fusion and requires the use of tools 3rd party and knowledge of such a process of preforms.  IMO, if one may wonder how to do that, so it's just better than you manually rebuild the Boot Camp partition to suite your needs if the current configuration does not meet your needs.  That said a clean generation always produces a less problematic situation and provides long-term for a better overall performance however if you want to search the forum or Internet V2P or physical Virtual you can find more information on what it has been covered before.

• How to use the onComplete and tween scale?

  It's my code.

  //width variable
  var widthSize:Number;
  var heightSize:Number;
  
  var TIMER_DELAY:Timer = new Timer(3000, 1); // 8 second delay
  TIMER_DELAY.addEventListener(TimerEvent.TIMER, EXMove);
  wedding_mc.alpha = 0;
  graduation_mc.alpha = 0;
  concert_mc.alpha = 0;
  
  function wedding():void
  {
       //trace(wedding_mc.width);
       widthSize = wedding_mc.width - 1400.15;
       heightSize = wedding_mc.height - 600;
       slideXTween = new Tween(wedding_mc, "alpha", Strong.easeOut, 0, 1, 5, true);
       slideXTween = new Tween(wedding_mc, "width", Strong.easeOut, wedding_mc.width, widthSize, 3, true);
       slideXTween = new Tween(wedding_mc, "height", Strong.easeOut, wedding_mc.height, heightSize, 3, true);
       slideXTween = new Tween(wedding_mc, "x", Regular.easeOut, 882, 499, 2, true);
       
       trace(widthSize);
  }
  function EXMove(event:TimerEvent):void
  {
       //To slide in on X axis
       slideXTween = new Tween(EX1_mc, "x", Regular.easeOut, 882, 499, 2, true);
       wedding();
  }
  
  TIMER_DELAY.start();
  

  The way I have with wedding(); does not work exactly as I wanted. So, how can I use onComplete to run the function wedding() after the EXMove is done? Secondly, the width and height of my wedding_mc are related, so, why can't I just tween only the width or the height instead of two?

  Any help is very appreciated.

  Look, they have a very good documentation that explains how to do lots of cool things. Their help is on pages that I put a link to as well in each class. Really, you should read the docs - they solve 90% of the questions. It refers to any class, it is.

  Regarding onComplete, I guess it should be:

  TweenLite.to (EX1_mc, 2, {x: 882, onComplete: wedding});

• How to use the swf and pictures as a hypertext link to specific slides when you click

  How to use swf and images as a link hypertext to specific slides when clicked.i average as a buttons.

  Hello

  The key is that you can not!

  What you * CAN * do, however, is to create the illusion that they establish between these objects. What you do is use a box click object which has been placed on top or in front of the Image or SWF file.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How to use the battery and the power cord in a smart way?

  Is it possible to do a power management, that use the battery as long as there is power in the battery and the first when there is no more power use the external power supply, which has been active all the time without loss of battery charge?

  Batteries wear out with use.  And they can wear out more when you do not use unless you physically remove them.  If you travel a lot, you will have to bite the bullet and buy new batteries every two years.  If you are usually connected to a power outlet, remove the battery and it will last much longer.  For more details, refer to the User Guide.  Different brands and models my vary in their recommendations.

  Good luck.

• How to migrate the relationship between two different epm versions.11.1.1.4 - 11.1.2.3

  Hello, we intend to make an hors-place upgrade to our 11.1.1.4 to 11.1.2.3 environment. The only thing stopping us is the question of how to migrate 11.1.2.3 11.1.1.4 reports. We have already considered the following options
  
  (1) LCM, LCM is taken in charge only between the same versions are at - it another way.
  
  (2) I know there is an option to export reports in the workspace, but the disadvantage that is that each report must be exported at the same time (atlease how it is in 11.1.1.4). And we have far too many reports to make them one at a time.
  
  (3) I have also considered the possibility of replicating data in the repository Directory (HYPERION_HOME\products\Foundation\workspace\data\RM1_Servername) of 11.1.1.4 to be used as the repository directory in the new version, assuming that reports and data analysis means the reports too. However after doing this I have connected to the new environment and could not see any of the reports.
  
  What other options are there to migrate the reports. Help, please.

  Teddd wrote:

  JohnGoodwin wrote:
  No need to delete tables as databases configured on the vesion as well, if you go to the bottom of the road upgrade data replication then select "Upgrade existing to the current version of 11.1.1.4 databases" when not to configure the database.

  Thanks for the reply of John, I looked at this option. But if I select this option if it does not affect the current 11.1.1.4 environment? Because it is an output level on the spot and we will be maintaining the old environment until we get the new environment to match the old. Thanks again.

  Clone the existing 11.1.1.4 databases, point to the clone.

  Documentation that should be studied - + "You can reuse the data and the existing database, or replicate the database and data to a new machine." +

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Can I use the cloud on two different computers States?

  I know that with a subscription, I can download on two computers, but I work from home in Georgia, while my office is in Pennsylvania.   I cause any red flags if I have a download is on my computer at home in Georgia and other my download is on my computer work in Pennsylvania?

  Lol just to use your Adobe ID for both and you'll be fine.

• How to use the extension and they are safe to use?

  Hello

  I intend to use firefox for iMac in order to get the benefits of extensions. Extensions that I use are the visited site speed measure. I am currently using gtmetrix for my site http://www.i-phony.com , I was told that it gives results from remote servers.

  My server is located in Saudi Arabia. Will be extensions of what the speed of the server measure be safe to use. And are they able to give an accurate reading of the place where I am?

  your support is much appreciated.

  Best regards

  Each addon at AMO avaible were examined and is safe to use.

• Satellite M30X-122: how to use the headphones and speaker at the same time?

  Hello

  y at - it a possiblity to use headphones and speaker at the same time?
  When I plug the headphones into the Jack, the speaker is created off the coast of the moment.

  Thank you
  Peter

  Hi Peter,.

  There is unfortunately no way to use both headphones and speakers at the same time. This is because tghere's a disconnection physical power for the internal speakers when you plug in the headphones. It is not by software. The only way around this would be to dismantle the headphones Jack and solder connections that are broken when you insert the headphone permanently.

  Kind regards