How to use the Motorola Flipside radio tuner?
I am comtemplating the upgrade on the other side. The card lists a radio tuner, but the only way that the phone could access radio is via subscription AT & T Radio. The phone has a radio tuner, but I find no where to find. Help, please.
I used the FM tuner for about ten minutes, try yesterday and I come on the phone with AT & T to double control without subscription started and the representative confirmed that he was not.
The app is quite primitive for FM radio, but the reception was great (I was out). I wish they had a separate application for the tuner. It is too easy to hit one of the choices which requires a subscription.
The tuner works only with wired headphones. I think the tuner uses headphones as antenna wires. This could be why the tuner does not work in the store, no support for any output unless a wired headset.
You can check on your line to a subscription in the AT & T system by going to att.con/db. Enter your phone number and they send you an SMS with a verification code to enter into your browser and you can see and manage all subscriptions on this line.
In addition, if you get the phone into an AT & T corporate store or best Buy you can exchange the phone within the first 30 days. I had to do it once and it worked great for me on. (Check the terms of the present).
I'm a volunteer. The MotoXprt tag means that I spend too much time here. The views expressed in my posts are mine. I am owner of a Backflip and now use a setback. If my opinion doesn't have any sense - ignore it!
Tags: Motorola Phones
Can someone tell me how to use the tuner DVB - T in Qosmioplayer? It is very much in the media library, but on starting the Qosmioplayer I just get snow like the old analog TV. I can go to my sky box via composite inputs, but want to use TNT an antenna in the drive.
As far as I know the Qosmio player is not able to receive the digital channels.
Unfortunately, it is not possible.
Okay, so here's the challenge. I have a power source and a headphone and not Bluetooth. It works perfectly with iPhones before 7. But with 7, it isn't possible to use the same configuration I had for years. I own my car, and I have no interest in buying a new car just to support a new phone. And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.
So, how to use the new iPhone 7 while remaining responsible and using my car speakers? Dongles Bluetooth that I need to reload, it's probably not.
Thus, looking for ideas that might have people. I can't be the only one with this concern.
It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.
I tried to figure out how to use the capture and the "print" button, or add or what you call. I press it and the whole page of a different color changes, so I try to cut the section I want but I don't know how to send it to the printer. Can someone help me with this. I'm not at savvy with tech stuff, but when I find a recipe or something and it doesn't have an option to print a certain area, I can't understand how to use it?
That happens to me is, I click and drag to make a rectangle of yellow selection, and as soon as I raise my finger on the mouse button, the part I've selected is captured as an image, a new tab opens and preview before printing, the image display. I can use the installation of the Page or simply print. But if I close the preview, this temporary image vanishes and I'm back on the page where I started. You see something different?
How to use the activity monitor to remove MegaBAckup on my mAc Book PRO?
Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.
How to use the utility disk first aid for hard drive internal el captian
Select the drive and click first aid.
If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.
I've seen various descriptions of how to use the print screen function.
It would be nice to actually tell one that works. None have worked for me.
[Fn] and Prt SCr does not work.
CTRL and Prt SCr does not work.
CTRL, Alt, and Prt SCr does not work.
[Fn], Ctrl and Prt SCr does not work.
If anyone knows the correct method to activate the screen capture function which would be a good thing.
From the looks of things, HP has a big problem with this function.
Here's a microsoft articleon the use of the screenshot function.
This should answer your questions.
Thanks for taking a peek.
How to use the acronym instead of this?
How to use the adapter from the wall with my Mac Pro laptop?
The AC wall connector is not compatible with the outlet on the MBP? As the MBP charger will work from 100v to 240v, a transformer is necessary. You need a converter that connects to the power outlet home and is compatible with your MBP. You can buy the Apple travel kit:
Or you can use a single specific converter for the geographical area:
(it is a UK USA example)
Or you can get the converter that adapts the charger directly:
http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord
(again, this is for a UK plug.)
Here is the description how to use the remote control on the Satellite X 200-2 b with Windows 7 64 bit.
Thanks for the link.
It will be fine if some owner of Satellite X 200 can confirm.
I just bought a LED TV model 50L9450VE. When installing, I need to enter the password for the wifi network. The remote doesn't have a keyboard of the letter, and the TV shows a soft keyboard to enter the password. How to use the software keyboard? I can't figure out how to get the cursor in it; the manual does not say, and I can't find the information online. Thank you.
Suppose you are from Israel? Although this model is not made for the EU market, but probably for the Asian market, it looks like the European L93 series.
You will find how to operate the software keyboard (page 52): http://www.toshiba-om.net/pdf/manual...h-Specific.pdf
Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!
Can anyone help please?
Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.
How to use the Clipboard?
I don't know is it instaled when I use the recovery disc.
After 3 years I do not know how to us it.
Can help the somebady by PFIC step-by-step instructions
I have no idea of what you want to do and what should I Clipboard Viewer tell you exactly, but AFAIK the Clipboard Viewer are a part of Win XP.
It s located in the folder C:\Windows\system32
The file named clipbrd or clipbrd.exe
You can also start typing Clipboard Viewer CLIPBRD in RUN.
I am trying to understand how to use the utility on my laptop satellite L350D-131 face recognition but won't have any look.
Can someone tell me how to use / start this feature please?
It should come a manual or a tutorial how to use this tool. I'm not an expert in the field, because I saw this feature only on a laptop in the stores. But it is a security feature nice little addition to the fingerprint system.
I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.
A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?
Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
The only person who could help me went to travel and not reachable.
Any help greatly appreciated
It of a very simple to recover the laptop.
Just boot from the recovery CD and follow the instructions on-screen ;)
I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
So in this case only the selected partition will be formatted!
But have you checked the size of the HARD disk in disk management?
Simply click on the my icon my computer and choose manage.
Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.
Maybe you are looking for
I have a chapter in Ibook author, when the text does not scroll to the end. In other words, when I arrive at the bottom the page I watch, I am usually able to scroll down and the extra text until the chapter ends. However, on this particular chapter,
How can I suggest to Apple to improve Siri grammar? For example, rather than "What can help you with?" Siri should not ask "How may I help you?" In this way Siri would contribute to the proper use of English grammar.
Hi, I'm new to Labview and try to use a USB-6525 control six independent valves. They'll be turning on and off at different frequencies to control a cell infusion system. I drew a diagram that allows me to program schedules that the CRDD is closed
I have a client running CME 3.2/CUE 1.1. (2) they would like a caller to press 0 after leaving a message in the mailbox, in order to be transferred to the operator. I have not seen anything in the documentation that indicates that there is an option.
I have several devices UPS 2700W Dell with a network management card. Some of them are now showing State of battery abandoned in the web INTERFACE, but the status is ok. When multiple verification of the State through the Dell UPS tools is shown as t