How to use the same user interface project for different HumanTask in GR 11, 1 material BPM

Similar Questions

• How to use the same mask, stencil, etc for several layers? Photoshop equivalent of the masked group?

  Hi I spent over half an hour for search manual, forums and the Internet and still can't find the answer. Help, please!

  For example, in a model with 5 or more layers, I want to use the same mask or stencil or what can hide layers 2,3 and 4 but areas layer 5 and all other possible layers below should not be affected.

  1. Before dialing the layers that you want to hide and apply a matte for the demo using the mask. Think to the Dial as an equivalent to the creation of a layer group.
  2. Use the effect on each layer you want to hide. It's easier to do if you apply mast set once and then create an animation preset to apply to the other layers. Just get mast set to do what you want it to do on the first layer, select Set Matte in ECW or in the timeline panel, and then go to the Animation > Save animation preset. Select then all other layers you want to apply the set matte to apply the preset.
  3. Put the mask at the bottom of the layers that you want to hide and turn on the switch to preserve transparency, then this group in composition with other layers of nesting.

  Here's another tip. You can set a custom color for all the layers you want to use the mast, then use the custom color for a group selection. This can make things easier down the line.

• How to use the same fragment of page inside different taskflows in multiTaskFlow?

  Hi, I am using Jdev 12.1.3

  I have a View1 fragment of page inside 2 workflow: btf - task1.xml and btf - task2.xml.

  In this TaskFlows, I invoke the ExecuteWithParams method with different parameters (even the iterator).

  If I add this task empties into multitaskflow, then the data will be the same. I think that the problem in the same iterator.

  Can I use a page fragment in multitaskflow and get different data?

  Thank you, Alexa

  If you set the scope of data to "isolated", each instance BTF will separate db transaction control (different data)

  Dario

• How to use the Weblogic user in my WebCenter application?

  Hello
  
  I'm doing my first Webcenter application. I have configured my wiki and weblogic server to connect, forum (discussions) with my users OID. So now any user OID can connect to this application.
  
  In my custom application Webcenter I configured JAAS security, now I would like to know how to use the same users OID in my application. Is this possible? Can someone help me? I tried Oracle Developers Guide, but it doesn't help me.
  
  Sorry for my bad English...
  
  Thank you
  
  Nelson

  You need to register a new provider of authentication on WLS. Please see this link http://www.oracle.com/technology/products/jdev/tips/fnimphius/oidconfig/index.html.

• Is it possible to several user interface screens to manage in the only user interface project in oracle BPM...

  Hi Experts,

  In my process I use multitask user regarding my needs. Now, I need to create screens of the user interface to the user of the task. Is it possible to several user interface screens to manage in the only user interface project in oracle BPM... Please let me know if you have an idea

  .

  Thanks and greetings

  Charm_Narra

  http://youtu.be/bpVVpDJLE1o   This video explains how to ensure that the UIS of multiple human tasks in a single project ADF.

  Dan

• How to use the same services-config for servers the and remote.

  My flex project works very well using the bottom but when I download my flash on the server I do not work, all the files and related paths are the same execpt remote is a linux server.

  <? XML version = "1.0" encoding = "UTF-8"? >
  <>services-config
  < services >
  < id = 'amfphp-flashremoting-service' service
  Class = "Flex.Messaging.services.RemotingService"
  messageTypes = "flex.messaging.messages.RemotingMessage' >"
  
  < destination id = "amfphp" >
  <>channels
  < Ref channel = "my-amfphp" / >
  < / channels >
  Properties of <>
  < source > * < / source >
  < / properties >
  < / destination >
  < / service >
  < / services >
  <>channels
  < channel-definition id = "my-amfphp" class = "mx.messaging.channels.AMFChannel" >
  " < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "
  < / channel-definition >
  < / channels >
  < / services-config >

  I think the problem is the line

  
  " < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "

  but I don't know how to use the same services-config for servers the and remote.

  I'll back up a bit.

  Breakpoint URLS are defined as follows in the services - config.xml:

  https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure

  The meaning of each of the tokens is clearer when we see them as part of a complete url. If your context root is set to http://localhost , then I have no idea how your application runs in any environment.

  If you leave the server.name and server.port chips in your configuration file, then they will be replaced when executing according to the location from which your application is served. However, the context.root token is replaced at the time of the compilation based on the value that you specify in Flex Builder or when calling mxmlc.

  In order to reuse your file services - config.xml, you must use the same context-root on your development environment and to your deployment environment.

• How to use the same point of view as read only in the ADF and editable

  Hello

  How to use the same point of view as read only in the ADF and editable? How can we succeed in TF?

  -James

  Hello

  Steven Davelaar wrote a presentation on this 'building highly reusable Taskflows.

  From slide 14, that's where your use case comes into play

  Frank

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• Use the Flex user interface in a PS plugin

  Hello!

  I am a user relatively to the Flex user interface design! A couple of days, I thought to give my PS plugins a look of the Flex user interface! I searched the internet on some tutorials or guides, but there is very little information relating to this. The guide Builder Extension CS says that we can interact with the Flex user interface & a native application by using the branchezBranchez C++ library. There is an example of code in Illustrator SDK for the same under the name FreeGrid (C++) & FreeGridUI(Flex UI). But I couldn't find an equivalent in PS.

  On further research in this regard, I found that we can use the PlugPlug.h (& .cpp) with a few changes in our C++ PS of the plugin code. I'm stuck at this stage now. How can I do to get out of here?

  Guide me people.. !!

  Thank you!

  This would be the part "all the settings you will need to do to get them working in the context of Photoshop" of my post! :-)

• How to run the Manager user interface programmatically

  I am looking for a method to run programmatically (from Labview), the Manager user interface, and then to connect it.

  Is there an API from .net to who?

  Thank you

  Note: I developed for earlier versions of VeriStand, a high-level application that manages projects of test benches and their versions. I want to update with the new manager of the user VeriStand interface.

  It is not a .NET API to control UI Manager, but there are some command line utilities, you can use to launch the user interface Manager, open a specific project, specify the IP address of the gateway to use and connect automatically.

  Try the following command line arguments:

  /nivsprj 'c:\project.nivsprj' Gateway localhost / connect

  They are documented in the online profile of Stimulus help editor.

• How to recover the active user interface objects on a screen?

  Hello

  Is it possible to recover all of the active user interface objects on a screen?

  I found ago api like net.rim.device.api.ui.Screen.getFieldWithFocus, but how to get sound type of subclass as ButtonField or BitmapField?

  another take:

  If you retrieve the field with focus, you can check what type of field you have recovered (using instanceof, for example)

• How to use the same script for several buttons

  Hello

  I have just started using flash if any help would be great!

  I create a blockbuster game, I have a grid of 20 buttons and I need (individually) to turn blue on red and click double click. I managed to do it with the first using this code;

  --------------------------------------------

  var click: Boolean = false;

  BN1.addEventListener (MouseEvent.CLICK, bn1click);

  function bn1click(event:MouseEvent):void {}

  clicked = true;

  var newColorTransform:ColorTransform = bn1.transform.colorTransform;

  {if (clicked)}

  newColorTransform.color = 0 x 064258;

  }

  BN1. Transform.ColorTransform = newColorTransform;

  }

  /////////////

  BN1.doubleClickEnabled = true;

  var doubleclicked:Boolean = false;

  BN1.addEventListener (MouseEvent.DOUBLE_CLICK, bn1dclick);

  function bn1dclick(event:MouseEvent):void {}

  DoubleClicked = true;

  var newColorTransform:ColorTransform = bn1.transform.colorTransform;

  {if (clicked)}

  newColorTransform.color = 0xac1e23;

  }

  BN1. Transform.ColorTransform = newColorTransform;

  }

  --------------------------------------------

  Now, I'll have trouble doing the same thing to work for the rest of the buttons, they are each named bn2, bn3 etc. They need to work individually and stay blue/red when clicked. I tried to list them as addEventListener orders but not with not a lot of success!

  Any help would be greatly appreciated, thank you!

  Tomo

  To do this is to use arrays to follow the buttons and their properties.

  var buttonList:Array = new Array (bn1, bn2, bn3);

  var clickedList:Array = new Array();

  var doubleClickedList:Array = new Array();

  Then use a loop for to assign functions and properties for each button:

  var thisMany:int = buttonList.length; This will give you the number of items in the buttonList array

  for (var i: int = 0; i

  buttonList [i] .addEventListener (MouseEvent.CLICK, btnClick); assign the function click on each button

  buttonList [i] .addEventListener (MouseEvent.DOUBLE_CLICK, btnDClick); assign the double-click function

  clickedList.push (false);  Add a value of false for each key in this table

  doubleClickedList.push (false);

  buttonList [i] .doubleClickEnabled = true; Set the property of double-tap for each button

  }

  function btnClick(event:MouseEvent):void {}

  var thisButton:int = buttonList.indexOf (event.target);  know which button has been clicked as an element in the table

  clickedList [Ceboutonselectionnel] = true;  Change the value in the table

  var newColorTransform:ColorTransform is buttonList [Ceboutonselectionnel].transform.colorTransform;.

  {if (clickedList [thisButton])}

  newColorTransform.color = 0 x 064258;

  }

  buttonList [Ceboutonselectionnel].transform.colorTransform = newColorTransform;

  }

  function btnDClick(event:MouseEvent):void {}

  var thisButton:int = buttonList.indexOf (event.target);

  doubleClickedList [Ceboutonselectionnel] = true;

  var newColorTransform:ColorTransform is buttonList [Ceboutonselectionnel].transform.colorTransform;.

  {if (doubleClickedList [thisButton])}

  newColorTransform.color = 0xac1e23;

  }

  buttonList [Ceboutonselectionnel].transform.colorTransform = newColorTransform;

  }

  Now you can have any number of buttons, just add their instance names in the table above.

• Using the same control appeal return of different tabs

  Hello

  I am fairly new to this bare with me for a second...

  I have a situation were I use several tabs with the same exact command buttons in each of them.  Given that the buttons have the same function I want to use the same reminder.  I understand that each TAB is considered as an expert group and has its own Panel of handle.

  My problem is I want the call to make the difference between the button OK of TAB1 and TAB2.  The handle Panel sent back, the call is (from what I can tell) the Panel handle for the tab which is great, but it doesn't have a constant right having at it in the header file.  How sure that TAB1 always has the Panel handle 2 and TAB2 has always handle Panel 3, etc...

  Example: When I click on OK in TAB1 handle Panel sent to the btnOK is = 2 recall.  If I click OK in TAB2 is the handful of Panel = 3.  I want to move to the OK button, but do not want to use hard coded in full.

  int CVICALLBACK btnOK (int command face, int, int event, void * callbackData, int eventData1, int eventData2)

  {

  switch (event)

  {

  case EVENT_COMMIT:

  switch () {}

  case 2:<----I don't="" want="" a="" number="" here="" but="" a="">

  "do this."

  case 3:

  "do this."

  };

  }

  return 0;

  }

  The easy solution would be to have a reminder for each of the buttons.  If it's the only way to go if it's what I'll do, but I am interested in what you think.

  Thank you!

  Hello

  I see at least three ways to get what you want.

  Solution A: depend on constant tab page name (as you can get it back by giving the handle from Panel)

  In the callback, insert this code:

  name char [64];

  GetPanelAttribute (name of Panel, ATTR_CONSTANT_NAME),
  If (! strcmp (name, PAGE1)) {}

  Code for the first page of the tab

  }

  Else if (! strcmp (name, PAGE2)) {}

  Code for the second tab page

  }

  ... code additional pages

  Solution B: based on the attributes of the tab

  int parent, index;

  GetPanelAttribute (Panel, ATT_PANEL_PARENT, & parent);

  GetActiveTabPage (parent, PANEL_TAB, &index);)

  switch (index) {}

  case 0:

  Code for the first page of the tab

  break;

  case 1:

  Code for the second tab page

  break;

  ... Add the code to additional pages

  }

  Solution c: use the callbackData for buttons

  This solution requires code in two different program sections

  * During the loading of the Panel with the tab control

  int pnlH;

  GetPanelHandleFromTabPage (Panel, PANEL_TAB, 0, &pnlH);)

  SetCtrlAttribute (pnlH, PAGE1_BUTTON, ATTR_CALLBACK_DATA, (void *) 1);

  GetPanelHandleFromTabPage (Panel, PANEL_TAB, 1, &pnlH);)

  SetCtrlAttribute (pnlH, PAGE2_BUTTON, ATTR_CALLBACK_DATA, (void *) 2);

  ... and so on

  * In the recall button

  switch (callbackData (int)) {}

  case 1:

  Code for the first page of the tab

  break;

  case 2:

  Code for the second tab page

  break;

  ... Add the code to additional pages

  }

• FDMEE 11.1.2.4 - how to load the same record source of 2 different custom in HFM members

  Hi Experts,

  We have the following situation:

  We need download a source document unique member 2 custom end balance as well as two rollforward Member custom movement 2 (additions, for example), the SAME account.

  In our GL, we have separate accounts for the additions, disposals, depreciation, etc.   In HFM, we use custom for these last members.

  I tried the multi-dimensions mappoing member card custom 2 individual based on the story.   It works fine, but when I add another condition by using the same account of source and card balance end Member, he only ended up filling a 2 custom members (according to what has been covered last importing).

  What would be the best way to load a single 2 custom members (same account) source document?

  I wanted to use the accounts of logic since I know that would work, but our financial team do not accept this approach.

  It is even possible to load the same record of 2 different HFM Member?  Even if we loaded the file even a second time in another place, I think that it still would replace what took the first time, instead of loading again to another custom on the same member account.  Even if we loaded to HFM on 'merge '?

  Any ideas at all would be appreciated.

  Thank you
  Mark Smith

  Why your financial team will not accept the approach of the accounts of the logic? He is the obvious solution to your problem. FDM or FDMEE, you can only load on the data at the intersection of a target element. If you want to load the same piece of data at several intersections in the target, then you need to have this piece of data repeated in data sources n then you will need something in the source that could identify how unique each copy so you can map correctly. As noted it is one of the main functions of the accounts of the logic, other approaches are likely to be messy, more prone to error and much harder to verify.

• using the same indicator of string in different stacked sequences

  Hi guys, I want to use the same string in different sequences stacked indicator. I tried to plug the output of each string constant through the sequence on my indicator chain outside the block in the sequence, but then I get an error "wire connected to a tunnel not channeled. What is the best way to use the same indicator for all sequences?

  Hi JoVMo,

  You can just use a local Variable of this indicator within the sequence...

  

  Kind regards

  Nitz...

  (Kudos are always welcome)