How to use the Satellite P100 with MS Vista and MS Bluetooth stack?

Similar Questions

• How to use the ESD document with structured templates

  Hello

  I started to learn working with SEDD. I have an existing ESD, now I'm suppose to use it to create documents. I created a new book and imported this ESD file to it. I can see all the items in the catalog of the element. But when I start to add items to the book and add a new document, the elements are turning to red. Referring to the User Guide, it is said EDD cannot be used directly and must be used with structured patterns. But I do not have these models structured with me. Can someone please tell me how to create these structured templates and how to use the ESD file with these models, and out of this problem.

  Thanks in advance.

  Although ESD exist in the form of a separate document, the only way that it can be used is when it is part of the model. As a model of structured FrameMaker, a structured model contains master pages, pages reference, character formats, paragraph formats, etc. IN ADDITION, a structured model contains a DSP. To add the EDD to your template file, or any document FrameMaker who will use it, open the template file and the file of ESD. Click anywhere in the template file, and then select file > import > element definitions. In the dialog box, select the EDD file as source and click Import. Then save the template file.

  To use the template file, open it and save it as a FrameMaker document, giving it the name you want. You can now create your structure.

  If you use a book, all documents in the book must use the same ESD. Open the template file. In the book file, select all the documents in the book. Then select file > import > element definitions. In the dialog box, select the template file and click Import. Once completed, all documents in the book have the same ESD. In addition, ESD is copied into the file of the book itself.

  You say:

  But when I start to add items to the book and add a new document, the elements are turning to red.

  It is is not clear to me what you do. While it is true that SOME elements of a book are in the book file, you cannot add a book of items in the folder (at least not as far as I know). In general, the book file, it encapsulates elements around the documents root elements in the book. You may need to update the book to get a part of the Red disappear lines. You may need to rearrange items in the structure of the book to remove the red lines.

  Hope this helps,

  Van

• How to use the TRUNC function with dates in the expression builder in OBIEE.

  Hello
  How to use the TRUNC function with dates in the expression builder in OBIEE.
  TRUNC (SYSDATE, 'MM') returns 1 July 2010"where sysdate is July 15, 2010 ' in SQL. I need to use the same in the expression builder in the logical layer mdb column.
  
  
  Thanks in advance

  Use it instead:
  TIMESTAMPADD (SQL_TSI_DAY, (DAYOFMONTH (CURRENT_DATE) *-1) + 1, CURRENT_DATE)

• How to use the "Toshiba controls" with other players?

  Heey

  I have a Satellite with Toshiba controls. How can I change so I can use the buttons for other media players and not only Windows Media Player?

  A dude sorry for the bad news, but I fear that it is not possible to use the Toshiba controls with another application as with WMP (CD) and WinDVD (DVD)
  I think that the utility was already programmed and designed to use only these two applications.

• How to use the video port with Vista on Qosmio G30

  Im running windows vista Ultimate edition.
  How to use the monitor in port?

  The Composite (in the port monitor) port is placed to the right.
  With the video component cable software plug-in delivered a CATV or satellite box can be connected to the computer to watch channels.
  You can for example use the Qosmio Player or Windows Media Center to watch other channels.

  As much as I know the ultimate Vista supports Windows Media Center, Windows Media Center HDTV.
  You should read some more details on your new operating system!

• How to use the Microsoft Narrator in Windows Vista

  I would use this feature - just do not know how. Can anyone lead me in the right direction?  Any help is appreciated?

  Hello

  Windows comes with a screen reader called Narrator, which reads text on the screen aloud and describes some events (such as displaying an error message) that happen while you're using the computer.

  You can see the following article on how to use the narrator in Windows Vista.

  Hear text read aloud with Narrator

  http://Windows.Microsoft.com/en-us/Windows-Vista/hear-text-read-aloud-with-Narrator

  I hope this helps.

• How to use the external screen with my Satellite M30?

  Hi guys, I have the following problem:

  I have a portable Satellite M30-642 former. My keyboard it is completely broken (spilled something on it) so I use an external USB keyboard.

  Now that I bought a TFT I wanted to use it as a primary device, so I need to take the laptop to the external output.
  The laptop itself recognizes as a secondary screen already, but this isn't what I want.
  Problem is I can't switch from the display without the FN key devices!

  I tried to search the net and this forum - but the solution posted does not work for the M30. There is no option in the utility of HW and not in the BIOS to enable the external keyboard support.
  Please is there any other combination of keys that would work or a software utility that allows me to turn on? It's a really bad situation for me :(

  All solutions anyone? :(

  Greetings and thanks in advance
  HQ

  Hello

  Please don't be crazy on me but I write here very often and somehow try to help, but I'm still irritated if someone thinks that anything is possible. Unfortunately, you have to accept that sometimes there is hardware limitation and there is nothing to do.
  I want to talk about primary and secondary monitor.

  On most laptops, the LCD is always set as primary and cannot be changed. So, as far as I know, without using the FN + F5 key combination you extend the desktop to external display and use both of them. Using display settings you should be able to switch to an external display only (display control panel settings NVIDIA advance settings and so on). Please test only because I don't have M30, but the principle is used the same.

  If you will be able to use external display only try to restart your laptop and see on which screen the office will be shown. If you will be lucky and office will be shown on the external display, try to extend the desktop to second monitor (laptop LCD).

  Good bye

• How to remove the Satellite P100 folder?

  Hi sorry if this has been asked before I tried searching but can't find the answer.

  How to open the case and remove the video card of a P100-240?
  I deleted every screws I can find but cannot get the case apart.

  Out of curiosity, but what is the problem with the video card? Defective?

  You know that this video card is part of the motherboard?

• How to use the Satellite M500-ST5401 for mobile calls using Bluetooth

  Team,

  I would like to know more information about the bluetooth connectivity of a laptop for mobile phones bluetooth-enabled. My model is Toshiba Satellite M500-ST5401.

  What I'd like to meet, I have a Sony Ericsson mobile phone and it has bluetooth with A2DP function.

  Normally, if we have a headset stereo bluetooth
  Mobile can be coupled and listen to music using the bluetooth headset for music that plays on the mobile phone.

  The same that I feel every time I get a call on my phone, I would like to transfer the call to my laptop where I would use portable speaker to listen to the voice of the caller and the computer laptop microphone to answer the call of mobile, and then it will be supported by mobile phones.

  Please let me know if this is possible, I just want to hold the phone away from my hand and wanted to manage calls incoming and outgoing, sitting just in front of the computer using technology built into cell phones and mobile devices.

  Please recommend me what are all the driver software and the hardware must be installed to achieve this.

  Your response is much appreciated thanks in advance.

  You have already started a thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=181953
  Don t create different threads on a single theme to avoid misunderstandings!

• How to use the Muse Widgets with Dreamweaver presentations

  I've been building websites with Dreamweaver for years

  -are particularly interested in some of the Widgets Muse and you're wondering how to integrate to existing sites built with DW?

  Please notify

  WillzShire

  Although it is possible to export the model Muse in Dreamweaver, I would advise not to do. At this stage of his development, Muse is very suited for the HTML/CSS illiterate. But once you want to create interactivity as a contact form, you will need to encode the file using the likes of Dreamweaver. Once you have worked on the file in Dreamweaver, you cannot return to the use of Muse for changes.

  With the foregoing in mind, if you have a knowledge of HTML/CSS, there should be no reason to use the Muse; all of the widgets used in Muse are available for Dreamweaver, but in another format.

• How to use the turbo speed with dual‑core 1.6 GHz 1.6 GHz Intel Core i5 (tot Turbo Boost 2.7 GHz)

  I have a processor;

  1.6 GHz

  Dual‑core 1.6 GHz Intel Core i5 (tot Turbo Boost 2.7 GHz)

  How can I use the turbo boost for a game?

  Although I don't really recommend it, you can use the application as described in http://osxdaily.com/2016/07/13/disable-enable-turbo-boost-mac/ . Your iMac i5 should support it.

• How to use the project lib with blackberry projects.

  Hello Experts!

  I have a project that I use on many projects like setting but still I deploy my application on the device that I need to uninstall the other application that use it to install my new application, I doubt if I can generate a unique .cod with frame embebed...

  All of the suggestions.

  Best regards, Rampelotti

  I think I understand your problem, but can be interpreted wrong but here is my answer anyway.

  It is possible to create a library/framework .cod file and then use it in several projects without having to copy and duplicate code in other applications.

  Just put all the common code in a separate library/framework project and compile it.

  When its compiled, you will see not only a .cod file, but also a .jar file.

  Include the .jar file in your new project under the Build Path/Library files.

  After that, using the full qualified namespace, you can import the classes and use the library files in as many projects without code duplication in multiple applications.

  Note: You need to include the .cod with the project file and add the correct additional lines in the .jad file and .alx files during deployment.

  Let me know if you need more explanation on what it is.

  If this was the answer you were looking for then don't forget to tap on accept the solution, otherwise I may not understand what you said but would like to help futher.

• How to use the Substring function with Case statement.

  Hi all
  
  I have a requirement where I have to use the substring function on the ground for the report criteria.
  FOR EXAMPLE
  I branch domain name where I have all the information of the branch names, now some of the branch names are too large with an extension after the name.
  now I want substing it, but the length of characters varies for each branch.
  so is it possible where we use a box where we can define if the character of name plug exceed a value then he substing with this length.

  Try something like this:

  LENGTH WHEN CARTER (tablename. Branch_Name) > n THEN SUBSTRING (...) Of ANOTHER tablename. Branch_Name END

  where n is the number of characters that you want to start the break.

• Need for education better to learn how to use the web inspector with smart phone

  I've been trying to run the example of kitchsink webworks app for my Smartphone with web Inspector is not successful.

  Here's what I did.

  1 bbwp kitchsink.zip d

  2. sign the cod to the bin/StandardInstall/kitchsink.cod file

  3. connect to the usb port my 9930.

  3. javaloader my 9930 cod.

  4. disconnect the usb.

  5 startkitchensink app on the device.

  6 see popup 'Web Inspector 192.168.1.100:1338 online'. Click ok and see the app running with the initial page.

  7. on chrome desktop, type "192.168.1.100:1338", I see a hyper link "Web Works Kitchen Sink. I click on the link.

  8 see "192.168.1.100:1338/inspectorBB.html?page=1" on the address, but the screen is blank.

  9. I remember at the Conference, the port number is 1337. I tried "192.168.1.100:1337", but it says "Google Chrome not could not connect to 192.168.1.100:1337.

  I missed the steps detailed here?

  Thank you

  June Jorgensen

  Thanks for the information. I tried it on safari and web Inspector works with the smart phone.

  Do you know if there is plan for the future for the web to rework on Chrome Inspector?

  June

• I can't use the toolbar google with this version and it is really bad, I want to go back to version 4 and I do not think the right to download it

  It's really good for me and easy to work with the gmail toolbar that I can easily manage the drive
  Firefox 5 will not work with it and I want to go back to version 4 I could keep working until they will fix it.
  and I can't find where I can download the 4 and how to change 5.
  Thank you

  The 7.1.20110512W version Google toolbar works in Firefox 5.0 using the add-on Compatibility Reporter, I tried it myself because of the large number of comments on the problems of the GTB.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/