How to watch two clips at the same time on the other, with an opacity of 50% each.

Similar Questions

• V10.2 has 2 of the same clip hit the other with a green line in the middle. Help!

  Hello

  My flash drive was working fine then all of a sudden on any browser, I tried Google Chrome, IE, Firefox and Opera, he plays the clip but has 2 of the same clip crushed on the other (so that you try to watch a movie on a 4:3 ratio 16:9 aspect ratio) & he has a brilliant green stripe between the 2 collars to... I tried to uninstall and reinstall but it still it! It does on any website I tried to watch the clips on & it's driving crazy me!

  PLEASE HELP IF YOU CAN, I WILL BE ETERNALLY GRATEFUL!

  First thing to try: disable hardware acceleration (Flash Player settings).

  If this does not resolve the problem, provide more information, i.e. your OS & version.

• How to subtract one signal on the other, with the help of an oscilloscope?

  I have two chaotic oscillators, which I am trying to sync. There is an oscilloscope, which channels are related to each oscillator. I need remove the signal from the oscillator-B, the oscillator signal - A, using the oscilloscope, so that I can find how much is the error between them. A - B would work very well, but there is only A + b. is it possible to do, without having to add additional circuit elements? If this isn't the case, that I would add, subtract one signal from another?

  Edit: I use the classic Multisim 13.0 oscilloscope.

  Hello.

  You can invert the signal B-

  the standard scope 2 ch a reversal for Channel B - there are 4 small buttons on the bottom of the chB instead of only 3 for chA.

  Best regards

  Michael

• loading movie clip to the stage with AS3 button click

  I'm trying to figure out how to load a clip to the scene with a click of a button and have the movieclip close again with a close button. Does anyone have a step by step on how to do this or links to tutorials.

  Here is an example of what I'm trying to do.

  

  Looks like you are using a 'el' and a 'single '.  they are similar, but they are not the same.

  copy and paste from your code to your properties panel or vice versa to correct.

• I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  Hi sindres79946597,

  Open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in the new tab in the same window.

  Now, reboot your system, when you open multiple PDFs that all will open in a new window so that you can easily compare.

  Kind regards
  Nicos

• How to open two PDFs at the same time (for example on two related screens)? It was always possible in the previous version of the Adobe Reader software.

  How to open two PDFs at the same time (for example on two related screens)? It was always possible in the previous version of the Adobe Reader software. Now while one of them is open, I can't open the other, because it is hidden, and I have only shown in the taskbar as a thumbnail.

  Hi ewap51098943,

  You can disable this in the Edit menu-> preferences-> General

  

  Kind regards
  Nicos

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• How do while preserving clipping mask the structure layer sup?

  Hi guys,.

  I'm editing a map and a need for my map divided into several rectangular segments. My card is composed of several layers and layers of sup I need to keep. When I'm mowing hide the map with a rectangle all the layers of subs merge in a single layer. How do while preserving clipping mask the structure layer sup? Looks like a "layer mask" is the right tool, but doesn't seem like CS6 has it?

  See you soon

  Carpet

  Create new layer and move all other layers so that they are now under layers of the new layer. Draw a rectangle on the top layers, and then click the button mask in the layer panel. You have now created a clipping from the base of the layer mask.

• Drive on which Windows XP to reside is always labeled as a system drive. How can I make one of the other disks that has Vista or 7 that the new system?

  Change the system drive

  I'll try to explain my situation better than I can.

  My situation is that when I used to have XP installed, I had installed the only drive I had back then which is now the drive D, for a long time, so I have Windows Vista Home Premium 32-bit, Windows 7 Home Premium 32 bit installed on two different discs, Vista is installed on drive C and 7 is installed on drive E , but I don't have XP that I had managed to get rid of it.

  My problem is that the drive on which Windows XP to reside has always left this disc marked as system in the disk management window, and I was wondering how to do that one of the other readers who has Vista or 7 that the new system?

  I already managed to change the startup disk from drive where Vista is installed to, it's just that I need to change the disk that is marked as system to another drive, such as D drive begins to show signs that it comes at the end of his life and I would like to move the startup folder as well as the other files needed to start on the other.

  I assume that you installed Windows XP 1, then Vista, 7 (these 2 OS not in order)?

  And Vista and 7 was by all means upgrade installation?

  Since originally, that you have installed Windows XP on drive D, it should be marked as 'system' and retains so the tag 'system '.

  The volume of the 'system' should be identified as the first primary partition active. It may or may not have the files it contains.

  The fact that the system considers "system drive" does not mean that there are files that it contains.

  Now, you want to delete the existing volume and create a new volume. Needs to be done outside the facility.
  When you start the cd or DVD to start the installation list us readers, if you remove the volume the volume drive letter is already booked, so you get the next available drive letter, do not re-use the deleted volume drive letter.

  If he removed during installation and then recreated as a new volume (formatting does not remove the volume, you need to delete the volume and recreate it)

  -[Posted by Darrell Gorter [MSFT] in another forum.]

  Try to format the XP partition and change the drive letter.

• Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

  You can also see:

  FAQ: Can I install Creative Cloud on several computers?

  You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

• Problems of displacement of clips on the timeline with the last update

  I have problems of movement of clips on the timeline with the last update

  and the selection of the clips on the original tab

  MacBook pro 15 "retina

  work

  I use a secondary monitor

  If I chronology in the second book of doesn´t monitor, but in the first monitro works very well.

  Maybe a bug

• Common cause of failure of the Mirage server in clustered environment and how customers will be switched to the other server in a cluster

  Hello

  Can someone share me information about common cause of failure of the Mirage server in clustered environment.

  And how customers will be switched to the other server in a cluster to continue their operations from the server failed.

  Kind regards

  C Bathesha

  In general, Mirage servers are not lacking. It is very rare (and not, for example, to problems of storage or endpoitns, which are more common).

  May raise problems of overload, memory or hardware malfunction too little.

  After that you make server standard troubleshooting (the etc system event log), you must file a Service request by VMware.

• How to call a method of the AM with parameters of Bean managed?

  Hello world
  
  I have a situation where I need to call the Managed bean (setDefaultSubInv) AM, under value changes Listner method. Here's what I do, I added the AM method on page links, and then at the bean call it
  
  Class [] paramTypes = {};
  Object [] params = {};
  invokeEL ("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
  
  It works and be able to call this method, if there are no parameters. Say that I pass a parameter to setDefaultSubInv(String a) method AM, I tried to call it bean but raise an error
  
  The string available = 'test ';
  Class [] paramTypes = {String.class};
  Object [] params = {DISP};
  invokeEL ("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
  
  I'm not sure this is the right way to call the method with parameters. Can anyone tell how to call a method of the AM with bean to manage settings
  
  Thank you
  San.

  Just do the following

  1. your method in the Client Interface.
  2 - Add to Page Def.
  3 - Customize your Script like below one to reach your goal.

  BindingContainer links = getBindings();
  OperationBinding operationBinding = bindings.getOperationBinding("GetUserRoles");
  operationBinding.getParamsMap () .put ("username", "oracle");
  operationBinding.getParamsMap () .put ("role", "F1211");
  operationBinding.getParamsMap () .put ("Connection", "JDBC");
  Object result = operationBinding.execute ();
  If (! operationBinding.getErrors () .isEmpty ()) {}
  Returns a null value.
  }
  Returns a null value.
  }

  I hope it helps you
  Thank you

• my laptop with 7, the other with vista does not, windows message told to go update that does not exist on the start menu. I'm locked out using my computers

  my laptop, 1 vote against and 7, the other with vista will not work.  I use norton 360.  message at startup said to go to microsoft update on the start menu.  There is no windows update in the start menu.  I'm locked out using my laptop.  Help, please

  For Vista, see http://windows.microsoft.com/en-us/windows-vista/How-can-I-tell-if-my-computer-is-up-to-date and http://windows.microsoft.com/en-us/windows-vista/Updating-your-computer

  For Win7, see http://windows.microsoft.com/en-us/windows7/How-can-I-tell-if-my-computer-is-up-to-date and http://windows.microsoft.com/en-us/windows7/Updating-your-computer

• Select the emp with a maximum salary for each hr.emp manager_id

  Hello
  Can someone help me to do this without doing any partitioning or analytical f:
  
  Select the emp with a maximum salary for each hr.emp manager_id.
  
  HR. EMPLOYEES Table Description: =.
  EMPLOYEE_ID
  FIRST NAME
  LAST_NAME
  HIRE_DATE
  JOB_ID
  SALARY
  COMMISSION_PCT
  MANAGER_ID
  DEPARTMENT_ID
  
  TX, all the guys
  Mario

  Hi, Mario,.

  Here's one way:

  SELECT       *
  FROM       hr.employees
  WHERE       (manager_id, salary) IN (
                                        SELECT    manager_id
                            ,               MAX (salary)
                            FROM     hr.employees
                            GROUP BY  manager_id
                                 )
  ;
  

  mario17 wrote: Hi,
  Can someone help me to do this without doing any partitioning or analytical f:

  Do you mean analytical functions?
  Why you don't want to use the analytical functions? Analytical functions, permitting the simpler, more robust and more effective to achieve these results, wouldn't you want that?