How to with Labview startup window hidden when Teststand start loading
I have Teststand development enviroment and Labview development environment installed on my computer, my use of Labview teststand adapter applications. It is every time when I start the application being Teststand, Labview, window pop auto-start - up, I wish to customize this behavior to let Labview just show in the taskbar.
When you distribute applications, everything has to run in the runtime engine (RTE). It should not require development environments (Dev Env) must be installed on the machine at all.
That being said, I recommend you configure the TS LV adapter to run the screw into the TEN. Which will automatically get rid of dialog to launch like this is part of the Env of Dev of LV.
Tags: NI Software
Have a problem with M/S Windows Movie maker that started today? When I add an audio link towards the file it double in the space. If the audio is at 3 min., now it is 6 min. Since it was just started is a problem on my end, or with the product? Spoke of a M/S tech and he told me to download the new windows live movie maker, but have the same problem. What I am doing wrong?
It may be interesting to try to convert the audio file to the
. Format WMA before you import into Movie Maker.
How to stop a program to open when I start my computer?
I would check the following:
- The program has an option to stop from?
- Otherwise use Windows Defender to disable: http://windows.microsoft.com/en-US/windows-vista/Stop-a-program-from-running-automatically-when-Windows-starts . If you cannot use Windows Defender because your antivirus turns off, you have to use the Configuration utility system; See: http://windows.microsoft.com/en-US/windows-vista/Start-System-Configuration and http://windows.microsoft.com/en-US/windows-vista/Using-System-Configuration
- Some products start themselves in other ways. Http://technet.microsoft.com/en-us/sysinternals/bb963902 Autoruns lists most of these places. This tool is designed for advanced users. Incorrect use can result in an unusable system. See: http://forum.sysinternals.com/what-to-uncheck-and-what-not_topic5226.html
Each window opens with a small window and I click the enlarge each time to open a full window.Three options.1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".3: IE New Window Maximizer
Original title: two versions of Windows 7 on my PC
When I start my PC< it="" shows="" 2="" windows="" 7s="" and="" ask="" me="" which="" one="" to="" use.="" how="" can="" i="" delete="">
EasyBCD  allows to delete the incorrect boot menu entry.
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
* Original title: IO Error Message - I am an amateur
When I start a backup of my hard drive to my external hard drive, I get an error that reads "I/o Error" with the 0x8078002A error code. I am a real novice. I can do either fix it or work around this problem?
Welcome to the Microsoft community.
Try the steps in these articles:
Error message when you try to perform a full backup on a Windows Vista-based computer: "" the request could not be performed because of an i/o device error".
Note: It is applicable for Windows 7 as well.
Perform a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
Whenever I start my computer (Windows XP SP3), a Windows Explorer window appears showing the AutorunsDisabled folder. Nothing is in the folder. I installed Windows XP-KB967715 - x 86 - ENU.exe and MicrosoftFixit50471.msi of Fix - It of Microsoft in the hope of preventing the Windows Explorer window to appear whenever I start the computer. He still appears every time on starting the system or re - start. Can someone help me with this problem? Thanks in advance.
It's probably in your startup folder. Check. Start, all programs, startup. To remove the open disk (c), open Documents and Settings, open all users or the folder with your name (only in one, try all users initially), open a Start Menu, open programs, open start and if it is delete it.
I'm simply Microsoft Narrator is running whenever I restart Vista Business. I always leave the program when it starts, but like a bad penny he returned always, yacking home. The program does not appear in the section of the Vista program features in Control Panel, so I can't simply uninstall it
Any suggestion would be appreciated
"key windows and U, it will pop up for easy access... and then click on".
on where it says use the computer without a display. You can disable the
narroator here... "(sic).
Vista tutorial - How to disable Narrator? Help!
When I start to enter a user name, a drop-down list of names is displayed. How can I remove a name in this menu?
Hello rs27, point culminating / touch, do not click on the user name that you want to remove, and then click on remove the keyboard.
I suffer from a problem occurred near the window when I start my computer,.
always, it comes out an error message and seems to crash.
Problem event name: Appcrash
App name: Explorer.exe
time stamp: 4907e242
fault module name: MpegSplitter.ax
fault module version: 220.127.116.11
fault module timestamp: 46dc161d
exception code: c0000094
exception offset: 000249eb
OS version: 6.0.6001.2.1.0.768.2
Locale ID: 3076
information additional 01:40 d 4
more information 2: 4062ad41ec8067256aa4c5e2b56d3c79
other information 03:40 d 4
additional information 4: 4062ad41ec8067256aa4c5e2b56d3c79
could someone here can help me solve the problem?
The MpegSplitter.ax is a codec file. If you have recently downloaded/installed a codec pack (or a program which included this codec), uninstall it. A quick Google for "MpegSplitter.ax" brought a lot of links, but this one has very detailed troubleshooting steps:
http://forums.techguy.org/multimedia/806709-mpegsplitter-AX-problem.html MS - MVP - Elephant Boy computers - don't panic!
I already had the opportunity to play a video clip of my LabVIEW program. Now, with the same program in the two operating systems, Windows XP and Windows 7, both versions work, but the version of Windows 7 will not be saved. Trying to save it, I get the following error message: "generic error of LabVIEW. Cannot save VI... LabVIEW Save 3 error code: FP bunch. "A 2010 version with this problem sampling program is attached. Any help would be appreciated.
Try this VI.
It seems that you have a video ActiveX component is corrupted.
Windows 8 Pro 64, recent installation on the new version of the computer.I often have two or more open windows on the desktop. After you install a better graphic with drivers card, when I try to move a window, she flashes green on the edges of the screen and then maximizes. Then, when I restore down, the window comes up at the same place where he opened. It is VERY annoying, I have found no way to prevent this. In short, it seems that windows try to 'Act' W8 where maximizes the targeted window mode (AND these windows maximize WITHOUT reduce it or restore down button!). How can I change the settings (which, so far, I could find) to stop this action "auto expand '?
None of these answers is 'applicable' to the problem. I stopped today by a W8 kiosk in a mall and asked the 'guru' it in this regard. The solution is to go to:
Control Panel\Ease of Access\Ease to access Center\Make the mouse easier to use
And check the box under make it easier to manage windows:
Prevent windows from being automatically arranged when moving to the edge of the screen.
When I try to connect to my home group I get a message "your network connection must have active IPv6." However, in the properties of my network it shows that it is enabled. I disabled my Norton firewall & virus scan but that doesn't seem to be the problem. I added the DisabledComponenets with the value set to 0 in the registry. Still get the same message.
First remove what you did just in case it is incorrect.
Your router and all the computers must be able to IPv6 (hardware, firmware, and drivers)
to use a homegroup. Check the system Maker (manufacturer of motherboard for customized systems)
or the sites of manufacturers of real devices to update network drivers. Also check the router
site of the manufacturer for firmware updated to date. Check their support and ask in their forums for everything
These are for Windows 7 apply to Windows 8.
How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista.
Windows 7 and Windows Server 2008.
The homegroup Windows problems (8)
Check the updates (especially network drivers):
Check with the manufacturer of system (manufacturer of motherboard for customized systems) updated
BIOS, drivers low-level chipset and drivers of devices shipped major. Run
DriverView - value VIEW drivers hide Microsoft - update those without drain in their
-Free - DriverView utility displays the list of all device drivers currently loaded on your
System. For each driver in the list, additional useful information is displayed: load address
of the driver, description, version, product name, company that created the driver, and
To check system drivers manufacturer as replacements and camera manufacturer who are most
current. Control Panel - device - Display Adapter Manager - note the brand and
fill out the template tab of the driver for your card video - double-click - write down the
the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if
3rd party with their own software and drivers and the other main device drivers you
Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
(Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
After each installation.
Always check in the Device Manager - drivers tab to be sure the version you install
actually arises. This is because some restore drivers before the most recent is installed
(particularly that audio drivers) so install a driver - reboot - check is to be sure
installed and repeat if necessary.
Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
I purchased, downloaded, installed and activated Windows 8 Pro on my laptop. Then I asked for and received the key to Microsoft's free product for the installation of Windows Media Center. I used the key and installed Windows Media Center.My laptop restarts automatically after the installation of Windows Media Center, but my Windows 8 Pro has been is no longer enabled. When I tried to use the product key of Windows 8 again to reactivate Windows 8, I got a message saying that this product key had already been used by another computer.I thought that maybe I had done something wrong, then just to make sure, I repeated the procedure as a whole: I reinstalled and reactivated Windows 8 Pro. I checked under "System" to ensure it has been activated and it was.Then I used the free Microsoft product key once again to set up Windows Media Center for the second time. When this facility was completed, and the computer restarted, Windows 8 Pro is no longer enabled. And for the second time, when I tried to activate it using the product key Windows 8 Pro, I got a message saying that this key has already been used by another computer.So my question is: how install and activate Windows 8 Pro and then install Windows Media Center without disabling Windows 8?
I suffer from the same problem you describe and even followed the same steps that you did. After having my windows disable the first time after installing windows media center, I did the installation 'clear all' and he always gave me the message that my key was in use after installation of Media Center. One thing I noticed, the last five digits of the key it lists on the page to turn on, show my key of windows instead of my windows media 8 pro key. It almost seems like my windows media center key is somehow get confused with my windows 8 pro key.
Whenever I start Magnifier and Narrator windows start automatically and I want to prevent them from running automatically
How to activate the Narrator or disable in Vista
How to turn on the Magnifier On or Off in Vista
How to check and change Vista startup programs
How to enable Windows features turn on or off in Vista
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
I accidentally deleted the album lemonade. I would like to download back but who wouldn't. know someone help me!
Original title: why my laptop can not do wifi hotspot? I use windows vista with Atheros AR9285 802 starter. 11 b / g WiFi adapt. Thank you for participating in my concern. I use windows vista with Atheros AR9285 802 starter. 11 b / g WiFi adapt
My officejet 7000 would be to print borderless photos size beautiful poster even using a brand off paper. (Staples brand) But my new 7110 printer prints much too dark. I choose the option "other photo paper.
When my hp with Skype using the party can not hear me. . nothing is cut on my end, I hear them well.
sell me a message that only dice that no estoy ejecutando una copia original Windows