How to write data I read frequency bands in excellent using the tools for the generation of reports.

Similar Questions

• date of reading of hurt to excel using the report generator tool kit

  Hello
  Im trying to read a date from an excel worksheet by using the report generator tool. I talked about this http://digital.ni.com/public.nsf/allkb/01B026BEB54E3414862571B600618827 KB and it works... kind of.

  My dates are all read next 4 years and 1 day. Can't really understand why?

  Any ideas would be appreciated!

  Thank you
  David

  The format of the time in LabVIEW is distinguished by the time format in Excel. If you simply convert the timestamp cluster double
  and paste that data into Excel, it won't make sense. This is because the Excel format is based on the number of days
  Since January 1, 1900. The time of LabVIEW is based on the number of seconds elapsed since January 1, 1904. Converts this vi
  LabVIEW to Excel time time. reverses the logic of switch from excel to labview

• How to import pictures in the excel worksheet without using the generation of reports

  Dear friends

  I want to know how to import the image or the image file in excel worksheet without using the generation of reports...

  Please come with suggestions or the code example

  Concerning

  Knani

  Please go through the link below

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3638

  Even if a Subvi is absent I think it will be useful for you.

  Concerning

  Rajesh nawal

• Troubleshooting for sending data of 16 sensors to an excel using the IO file worksheet

  Hello everyone. I'm taking 16 sensor data using multiple analog inputs. The device that I use is a 6210 USB data acquisition module and so far I have further complicated the cause of program, it seems to work when I run. I read that you can add multiple channels to a Daq Assistant and use just this one Daq Assistant for all sensors and use a separate signals function, but I don't know how to write code that can be used for the task of trying to send that data from all 16 of the sensors to an excellent spreadsheet file. If anyone can help by sending a file attached on how correctly, that would be great. I'll put the file attactched down below what I tried to do.

  Thank you for all your help.

  Start by saying 'never use the DAQ Assistant!'.  Instead, read this excellent summary of NOR-DAQmx that tells you how to do almost everything you need quickly and easily.  What I suspect you want to do is every moment, taste all 16 channels and bring them into a table of numbers I16 (or, if you have defined scales, as 16 slna in units, you set).  You can "wrap" your only playback function of data acquisition within a while or for loop of N samples (for example, until you press Stop), then take the (now 2D) array of N points of 16 channels, and write to Excel.

  First of all, to get the data in "better shape", using DAQmx.  Have you tried opening MAX and get data by using Test panels?  You can see how MAX can taste all 16 channels at once, at the current rate you specify, permanently?  You can use MAX to set the scales, and if you perform a task in MAX, you can (when configuring your DAQ VIs) pull down this task already defined-and-configured and have almost all of the configuration done for you by MAX (well, not really for you, but made by you when you have made and saved the task).

  Bob Schor

  P.S. - These lights on the front panel are a bit garish, aren't they?  But very pretty...

• How to write data in mode intertwined with TDMS C DLL 2.0?

  Hello

  How to write data in mode intertwined with TDMS C DLL 2.0?

  I use DAQmx features in Visual Studio C++ without Measurment Studio.

  This function returns the data in interlaced mode.

  How can I configure the functions of DLL C TDMS to store this data in the tdms files?

  I see that it is not possible with the PDM version 2.0 with 1.0.

  Thank you

  -TDM C Dll is not able to do

  -TDM header writer may be usable for this but is not able to be used for tdms files.

• It is possible to write data to files on a local computer using util_file instead of the server?

  Hello

  I use oracle 10g. It is possible to write data to files on a local computer using util_file instead of the server?

  Concerning

  PL/SQL is a programming language on the server side. So the answer is no if you have a shared drive on your server that points to your client you can. But that opens all kinds of security problems.

• How to print an Adobe Reader PDF page in duplex, using a mac and a brother printer?

  How to print an Adobe Reader PDF page in duplex, using a mac and a brother printer?

  Hey Sanford,

  Adobe Reader and Adobe Acrobat allow you to print double-sided if your printer supports this feature. The printer driver controls the options, not of Adobe Acrobat or Adobe Reader.

  Check your printer documentation to see what features your printer supports.

  Please see this KB document for the steps double-sided printing. Acrobat, Reader.

  Let me know if you encounter any problem.

  Kind regards

  Nicos

• How can I restore my computer to factory settings with using the computers original disc?

  Original title: ' ideas: insert an error code or give a brief description of what you're trying to accomplish or difficulty. " __ »

  I want to know how I can restore my computer settings to factory with using the original disk of computers or to create a recovery disk

  Here you are options to reinstall Vista:

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?

  How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?)

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  There is no practical way to do it.

  If you do not enable iCloud Drive on your Mac, you can upload files to iCloud by car via the web interface at https://www.icloud.com

  But you can access the files from the web interface and won't icloud drive as drive in the Finder.  You cannot use the Finder to access the files. You need to download it to use.

• How can I load updates from pilot to another pc using the ethernet cable?

  How can I load updates from pilot to another pc using the ethernet cable?

  You would be better to use a flashdrive rather than an Ethernet cable. To connect using an Ethernet cable you need a crossover cable and then configure the network cards.

  I hope this helps.

• How is it possible that my favorite web browser, (trust) using the / offers WOT? What has gone wrong? I'm disappointed / / Thomas, Germany

  How is it possible that my web browser favorite, confident using the / offers WOT? What has gone wrong? I'm disappointed / / Thomas, Germany

  Tomew64 said

  The problem I was Mozilla proposed this add, resp. create the possibility for download. Have not, they check the possible risks?

  Mozilla did not this WOT extension, just like the vast majority of Extensions housed at addons.mozilla.org. Many Mozilla rendering Extensions have Mozilla or Mozilla Labs as the author.

• How can I recover my PW Windows? I was using my fingerprint for so long, I forgot the PW.

  How can I recover my PW Windows? I was using my fingerprint for so long, I forgot the PW.

  We are unable to help recover passwords on this forum.  You can use a password reset disk.

• I bought Adobe Creative Suite 5.5 Design Premium a few years ago. I have since upgraded my windows computer to a new one without a CD player. How can download & install Adobe Creative Suite 5.5 without using the disc that I bought?

  I bought Adobe Creative Suite 5.5 Design Premium a few years ago. I have since upgraded my windows computer to a new one without a CD player. How can download & install Adobe Creative Suite 5.5 without using the disc that I bought?

  Here are the links to download:

  Download CS5.5 products

• DASYLab how to write data to a file every 15 minutes

  Hi all

  I use dasylab and datashuttle/3000 to record data. What I want to do is to write data to a file every 15 minutes. I use the milti-file, which can write data to the file diffenret, but how do I control the timing, as the journal data every 15 minutes automatically.

  The other problem is that I use FFT analysis of the frequency spectrum. How can I determine the value of frequency where the peaks that happens.

  Thank you

  Write less data in the file that you have collected requires the reduction of certain data.

  There are three techniques to consider.

  With an average or an average of block - both reduce the data by using a function of averaging, defined in the module. To accomplish the reduction of data, choose block or RHM mode in the dialog box properties, and then enter the number of samples/data values that you want to reach on average.

  Average - when you reduce the data, you also should reblock data using the block length of the change in the output parameter. For example if you enjoy at 100 samples/second with a block size of 64, the average module configured on average, more than 10 samples will take 10 times longer to fill a block. The initial block represent 0.64 seconds, the output block represent 6.4 seconds at a sampling rate of 10 samples/second. If you change the size of output in one block, the program remains sensitive.

  Average block - average values in a block against each subsequent block, where the average is based position. The first samples are averaged, all second samples are average... etc. The output is a block of data, where each position has been averaged over the previous blocks. This is how you will be an average data FFT or histogram, for example, because the x-axis has been transformed in Hz or bins.

  Second technique - separate module. This allows to reduce the data and the effective sampling rate jumping blocks or samples. For example, to reduce the data in 1000 samples / second to 100 samples per second, configure the module to keep a sample, jumping 9, keep one, jumping 9, etc. If you configure to skip blocks, you will not reduce the sampling frequency, but will reduce the overall amount of data in a single block 9, for example. It is appropriate for the FFT data or histogram, for example, to have the context of the correct data.

  Finally, you can use a relay and a synchronization module module to control. For example, to reduce a sample data every 15 seconds, configure a generator module of TTL pulses for a cycle of 15 seconds of time. Connect it to a Combi trigger module and configure it to trigger on rising and stop the outbreak directly, with a trigger value after 1. The trigger output connects to the X of the relay command input.

  In addition to these techniques, you can change the third technique to allow a variable duration using a combination of other modules.

  Many of these techniques are covered in the help-tutorial-Quickstart, as the data reduction is one of the most frequently asked questions.

  In regards to the FFT... use the module of statistical values in order to obtain the Maximum and the Max Position. The Position of Max will be the value of the frequency associated with the Maximum value. The output of the statistics module is a single sample per block. Look at the different FFT sample installed in the worksheet calculation/examples folder.

• How to write data from the acquisition of data in NetCDF format?

  I connect to a set of data from the sensor through the DAQ assistant and want to write all data in NetCDF format. I have the required plugins installed, but still can not find how to do this.

  Or the labview can only read the netcdf files, but cannot write it! Please let me know if there is any other way out. I have looked everywhere but could not find something useful!

  Thank you

  Hey,.

  Sorry, the sheet in effect only allows to read NetCDF files, not writing to the NetCDF format.

  Kind regards

  -Natalia