How to write data in text file

Hello

When I save the following code in a package as a procedure.
He made a mistake

(1): PLS-00201: identifier ' TEXT_IO. Type_de_fichier ' must be declared



code
===

PROCEDURE prc_writefile
(v_fname IN VARCHAR2,
v_input1 IN VARCHAR2,
v_input2 VARCHAR2)
IS

linebuf VARCHAR2 (5);
in_file Text_IO.file_type;
OUT_FILE Text_IO.file_type;

BEGIN
-print
OUT_FILE: = Text_IO.fopen('C:\saved_log.txt','a');
Text_IO. Put_line (' out_file,' updated a file ' |' test data ');
Text_IO.fclose (OUT_FILE);


EXCEPTION
WHILE others THEN
MESSAGE(SQLERRM||) e '|| SQLCODE);
END;

END;


===========


How to reach the Text_IO package built to this


Rgds

sexy

Vanessa,

Text_io is built in package provided with Oracle Forms but not db. If you need manage files db level, use utl_file.

Thank you
Raja.

Tags: Oracle Development

Similar Questions

  • Write data to text file generates the error

    Hi all

    I need to write data to a file using TestStand and I configired the entrance and outside like below, but I get the error message like ' an error occurred 'Write' calling in 'ITextStream' of 'Microsoft Scripting Runtime' [error Code:-2146828234].

    I followed the same procedure for reading text that works very well for me.

    Hope others might have faced the problem / or I do something wrong.

    Do what is necessary.

    Found problem while opening a file I used IO Mode ForReading instead of ForWriting.

    Unnecessarily the thread created, but then hope this can help someone later when they deal with a particular issue.

  • DASYLab how to write data to a file every 15 minutes

    Hi all

    I use dasylab and datashuttle/3000 to record data. What I want to do is to write data to a file every 15 minutes. I use the milti-file, which can write data to the file diffenret, but how do I control the timing, as the journal data every 15 minutes automatically.

    The other problem is that I use FFT analysis of the frequency spectrum. How can I determine the value of frequency where the peaks that happens.

    Thank you

    Write less data in the file that you have collected requires the reduction of certain data.

    There are three techniques to consider.

    With an average or an average of block - both reduce the data by using a function of averaging, defined in the module. To accomplish the reduction of data, choose block or RHM mode in the dialog box properties, and then enter the number of samples/data values that you want to reach on average.

    Average - when you reduce the data, you also should reblock data using the block length of the change in the output parameter. For example if you enjoy at 100 samples/second with a block size of 64, the average module configured on average, more than 10 samples will take 10 times longer to fill a block. The initial block represent 0.64 seconds, the output block represent 6.4 seconds at a sampling rate of 10 samples/second. If you change the size of output in one block, the program remains sensitive.

    Average block - average values in a block against each subsequent block, where the average is based position. The first samples are averaged, all second samples are average... etc. The output is a block of data, where each position has been averaged over the previous blocks. This is how you will be an average data FFT or histogram, for example, because the x-axis has been transformed in Hz or bins.

    Second technique - separate module. This allows to reduce the data and the effective sampling rate jumping blocks or samples. For example, to reduce the data in 1000 samples / second to 100 samples per second, configure the module to keep a sample, jumping 9, keep one, jumping 9, etc. If you configure to skip blocks, you will not reduce the sampling frequency, but will reduce the overall amount of data in a single block 9, for example. It is appropriate for the FFT data or histogram, for example, to have the context of the correct data.

    Finally, you can use a relay and a synchronization module module to control. For example, to reduce a sample data every 15 seconds, configure a generator module of TTL pulses for a cycle of 15 seconds of time. Connect it to a Combi trigger module and configure it to trigger on rising and stop the outbreak directly, with a trigger value after 1. The trigger output connects to the X of the relay command input.

    In addition to these techniques, you can change the third technique to allow a variable duration using a combination of other modules.

    Many of these techniques are covered in the help-tutorial-Quickstart, as the data reduction is one of the most frequently asked questions.

    In regards to the FFT... use the module of statistical values in order to obtain the Maximum and the Max Position. The Position of Max will be the value of the frequency associated with the Maximum value. The output of the statistics module is a single sample per block. Look at the different FFT sample installed in the worksheet calculation/examples folder.

  • How to write data in mode intertwined with TDMS C DLL 2.0?

    Hello

    How to write data in mode intertwined with TDMS C DLL 2.0?

    I use DAQmx features in Visual Studio C++ without Measurment Studio.

    This function returns the data in interlaced mode.

    How can I configure the functions of DLL C TDMS to store this data in the tdms files?

    I see that it is not possible with the PDM version 2.0 with 1.0.

    Thank you

    -TDM C Dll is not able to do

    -TDM header writer may be usable for this but is not able to be used for tdms files.

  • How to write data in an Excel spreadsheet protected (with unlocked cells)?

    Hello!

    I have LabVIEW 8.2 and I often use the report Generation Toolkit for Microsoft Office' to save data in Excel spreadsheets. So far, I only used the leaves unprotected.

    But right now, I have an Excel worksheet protected by some cells unlocked. If I open the file using Excel I can fill these unlocked cells without any problem. However, I am not being able to fill these cells unlocked using LabVIEW and the Toolbox. I have a few questions:

    (1) is it possible to use LabVIEW to write data in a protected Excel worksheet, even though she has unlocked the cells?

    (2) if it is possible, how can I do that?

    OBS: I noticed that if I unprotect the sheet, I can write data to the file. But I don't want to be protected and the protection of the sheet, since users will not have the password.

    I hope that I was clear. I really appreciate any help you can provide.

    Thanks for the replies.

    Use ActiveX I could write the cells individually. By doing this, I could write in the unprotected cells without any problem. hour

    Probably, the Toolbox has been activated somehow the overall protection of the spreadsheet and Excel was not allowing writing.

    I had never used before ActiveX, so I had to learn it from scratch. I was looking for some tutorials on the internet but I have not found much information easy. What struck me the most help is an example that comes with LabVIEW named "Excel - write Table.vi. After some tests, I was able to open my data protected from the worksheet and fill in the unlocked cells.

    Thank you guys!

  • Satellite P500/01R reads the data, but cannot write data on CD files

    I recently bought a laptop Satellite P500/01R. I am able to read a data CD, but can't write data on CD files. The CD is read/write.

    Any ideas?

    Hello

    Have you tried different burning software?
    I m using Nero and in my opinion one of the apps better combustion.
    Here, I can choose between CD, DVD, DL or Blueray (only possible if the CD/DVD drive also supports this).

    Have you also checked diffΘrents CDs from different manufacturers?
    You should do this since not all disks are 100% compatible.
    I had several problems with different CD or DVD in most of the cases it was a compatibility issue, I tried TDK and this kind of drive is compatible with my CD/DVD drive
    I m using the standard of R.

  • Download data from text file for Hyperion ESSBASE by FDM.

    Hello

    I want to upload data from text file for Hyperion ESSBASE by FDM. The file format is given below.


    Entity, Department, designation, effective, SalaryPaid
    E11001, BSG, AsstManager, 12, 820000
    E11001, BSG, Manager, 6, 740000


    Where staff and SalaryPaid is the Member of the account dimension. Entity, Department, and designations are the dimensiosn in the ESSBASE.

    Is it possible to download the file above using FDM, can we have two account member in the line?

    I am brand new with FDM. ask for your help.

    Kind regards
    Sunil

    Create two scripts to import (choose Import Data Pump when you are prompted for the type of import script)

    (1) call the GetAccounts 1st and 2nd PutAccounts
    (2) associate GetAccounts size amount in your import format.
    (3) associate PutAccounts with the account dimension in your import format
    (4) adding NZP expression to dimension of amount
    (5) in GetAccounts put the following code...
    +' Get the names of account in the header line.
    If DW. Utilities.fParseString (strRecord, 5, 4, ",") = "number of head" Then
    + ' Local variables for the account names.
    + Acct1 dim +.
    + Acct2 dim +.
    +     +
    + ' Head Count (column 4 of 5) +.
    + Acct1 = DW. Utilities.fParseString (strRecord, 4, 5, ",") +.
    + ' Wages (column 5 of 5) +.
    + Acct2 = DW. Utilities.fParseString(strRecord, 5, 5, ",") +.
    +     +
    End If

    GetAccounts strField =

    (6) in PutAccounts put the following code...

    +'+ Local Variables
    Dim AcctName (2)
    Dim AmountVal (2)
    Dim z
    Dim rsAppend

    + "The names of individual account is analyzed and stored +"
    AcctName (1) = DW. Utilities.fParseString (RES. PvarTemp1, 2, 1, ',')
    AcctName (2) = DW. Utilities.fParseString (RES. PvarTemp1, 2, 2, ',')

    +' If student for accounts from here import file.
    AmountVal (1) = DW. Utilities.fParseString (strRecord, 5, 4, ",")
    AmountVal (2) = DW. Utilities.fParseString (strRecord, 5, 5, ",")

    +' Name of temporary importation work table +.
    strWorkTableName = RES. PstrWorkTable

    +' Create temporary table recordset trial balance +.
    Set rsAppend = DW. DataAccess.farsTable (strWorkTableName)

    For z = 01:58 ' this can change depending on the number of additional accounts processing

    + If IsNumeric (AmountVal (z)) Then +.
    +          +
    + If (z) AmountVal <> 0 Then +.
    +          +
    + ' Create a new record and to provide its field values.
    + rsAppend.AddNew +
    + rsAppend.Fields ("DataView") = "CDA" +.
    + rsAppend.Fields ("PartitionKey") = RES. PlngLocKey +.
    + rsAppend.Fields ("CatKey") = RES. PlngCatKey +.
    + rsAppend.Fields ("PeriodKey") = RES. PdtePerKey +.
    + rsAppend.Fields ("CalcAcctType") = 9 +.
    + rsAppend.Fields ("Account") = AcctName (z) +.
    + rsAppend.Fields ("Amount") = AmountVal (z) +.
    + rsAppend.Fields ("Entity") = 'chain of the entity here ' +.
    + rsAppend.Fields ("UD1") = "string C1 here +.
    + rsAppend.Fields ("node2") = "String C2 here +.
    + rsAppend.Fields ("UD3") = "String C3 here +.
    + rsAppend.Fields ("UD4") = "string C4 here +.
    + "Add folder to the collection +"
    + rsAppend.Update +
    +               +
    + End if +.
    +     +
    + End if +.

    Next

    +' Close the recordset.
    rsAppend.close

    If DW. Utilities.fParseString (strRecord, 5, 4, ',') <> '0' then
    + PutAccounts = DW. Utilities.fParseString (RES. PvarTemp1, 2, 1, ',') +.
    On the other
    + RES. PblnSkip = True.
    End If

    You may need to change the aboveto that meet your exact needs, but the basic structure of the scripts should not change too

    Published by: SH on May 25, 2012 10:34

  • How to write graph of waveform data to text file with the option to the user to do

    So, I'm new to labview and will have bad to write a program in particular.  I have a waveform graph that runs for 120 seconds, generating a sine curve.  I am, however, having a time difficult get the program to write the x and are coordinated in a text file.  I've attached what I have so far.

    The first task I was assigned was to write a program that creates a curve of snusoidal on the front panel by adding a data point every half second for 120 seconds.  The plot should starts only if the user presses a button to start.

    The next part is to give the user an option to write the data generated in a file of worksheet called 'sine.txt '.  The file name and location should be hard-coded.  The file must contain the x and there contact information of each data point in columns separated by tabs, also known as the delimited.

    I spent several hours refining the attached program, and I can't seem to make it work right.  Any suggestions would be helpful at this stage.

    Sincerely,

    A student of chemistry frustrated whose research mentor is out of town

    First, you create files Excel.  You create text files.  And it seems that your writing on a file already created X (time) vs Y (curve of data) that is delimited by tabs.

    All you do is simply too complicated or a Rube Goldberg.

    All you need is the joint.

  • How constantly write data in a txt file

    Hello
    first of all, sorry for the bad English, but I have a problem to write data continuously to the txt file... I have a chart 2D with values based 2 sliders (sliders values) and some functions I want to interpolate the value by using the bilinear method... and after that the value of the sliders, interpolated value and the value of the closest points, I want to write to a file txt... for every 2-3 seconds perhaps, it would be ideal to be formatted as ::
    x y f f1 f2 f3 f4
    ..   ..  .. . .. .   ..   ...  . ..
    ... ...  ..    ...   ...   ...   ...

    but... first of all I have a problem with writing data, because every time he deletes old data and simply write a new and it is not horizontal... I am very very new to this (it's obvious) and any help will be very grateful 
    Thank you

    Diane beat me to it, I made a few changes to your code, so I'll post it anyway.

    As proposed, please go through the tutorials.

    I added an entry to the worksheet at the end node just to show it can be done at the end so. Table of building on a while loop is not very efficient memory, but it's just to show you what can be done. If you plan to go this route, initialize an array and use the subset to the table replace.

    All the best.

  • Can all help with VI to get data (HEX) serial number and write in the text file

    Hello I am struggling with this problem for 2 months... They get help from different I thought I solved the problem, but of no use yet I stand on zero

    Problem: I need to get data on USB high speed HEXAGON shaped (coming in hexadecimal and be stored in the text file to the hexadecimal format as each hexadecimal value online different I'll also to attach the file)

    Get us ASCII on series or VISA read but when trying to convert to hex as shown in text file making it slower to deal with code, I know that my VI will have to improve more... I'm waiting for suggestions

    Need urgent help...

    Thanks in advance

    Hi Ali Afzal,.

    I think that the attached example can work for you. If not, then try the solution with sending the data to a parallel running the loop and store it there.

    Mike

  • How to catch exceptions and write in the text file

    For all developers,.

    This is the problem,

    I want to print my exception stack trace in a text file.

    This developer can know and analyze on what function is error and what exception for this error...

    Is it possible to do this?

    Thank you...

    Yes, you can write like try (), it returns a string, and you can write that string to the file.

  • Write in the text file on request

    Hello

    I've been struggling with the "write to text file" in the part of the attached .vi button

    I want to be able to say my program when I press on the Boolean key it should collect 1 sample point only from the mean.vi - now that I managed to do a Boolean-button that starts the collection of data and then I have to press the button again when I 'think' now, I collected a data point using the structure of the case.

    Can someone help me to collect the data a not that when I press the Boolean?

    Thank you!

    Change the mechanical action of the key "lock when released.  It is an option to right click on the button on the front panel.

  • Convert data from text file to display for hex UDP transmission controls

    Hello

    I'm reading packets ethernet from a text file containing the actual hex data packets to then send these accurate return through a writing UDP hex data. I can't understand how to feed data into the function of writing UDP as real rather than characters ASCII hex data, as it does by default. I had the screen on the last VI before the writing of the UDP to "hexadecimal display mode" and if I manually type the hexadecimal values in the VI (hexadecimal string to binary String.vi - attached), then it passes the commands correctly. However,... when I fed the string of text in my text file data in this VI, it seems to be the substitution of this hexadecimal display on the VI input mode and the resulting entry in my UDP is still ASCII character mode. I tried to use a cast inside this VI, type... but that doesn't seem to work right. I have attached the main VI and VI which tries to prepare data before reading the UDP protocol. I've also attached an example of text file of data that I am an attempt of analysis.

    Any help would be appreciated,

    Thank you

    Hi jsrocket,

    the attached example should work as a transformation.

    Mike

  • Try to write data to the file, but error 200279

    I have problems when writing data to a file. 10 seconds in the recording process, I get the error 200279. I did some research on the subject, but I am unable to corect my code. I think I want to increase the size of the buffer, but he prefers, I suppose, to read the data more frequently. The way that I save my file is, before starting the VI, I attribute a location and name of the file (e.g. data.csv). The date and time is added at the end of the actual when file the I start to record the data (e.g. data_07-26 - 13_122615.csv). If the file does not exist, it creates a new file, and then adds the data of this file after each iteration of the loop. The reason why I did this way was so I don't have to worry about running out of memory, but apparently my code is wrong.

    I will include a copy of the faulty section of my code. Any help would be greatly appreciated.

    Thank you.

    Your problem is that the writing on the disk is slow.  It is pretty slow so it causes your DAQ buffer overflow and cause error and loss of data.  What you need to do is to implement a producer/consumer.  This will put the data acquisition and recording on the disc in separate loops.  This will allow data acquisition work at speed, that he needs to deal with incoming samples and writing on disk can run at all what pace, he can.  You send data from data acquisition to the loop of logging using a queue.

    You can also think about changing how you write to the file.  VI is constantly open and close the file, which is a very slow process if you do it inside a loop.

  • Write to a text file

    Hi friends,

    I want to write an error in a text file using the procedure but its throwing an error below

    declare
    f utl_file.file_type;
    s varchar2 (200);
    Start
    f: = utl_file.fopen('C:\TEMP','NCW_ET15.log','W');
    loop
    UTL_FILE.put_line (f, s);
    dbms_output.put_line (s);
    end loop;
    exception
    When NO_DATA_FOUND then
    UTL_FILE.fclose (f);
    end;

    ==========

    Error report:
    ORA-29283: invalid file operation
    ORA-06512: at "SYS." UTL_FILE", line 536
    ORA-29283: invalid file operation
    ORA-06512: at line 5
    29283 00000 - "invalid file operation.
    * Cause: An attempt was made to read from a file or a directory which is
    not exist, or the file or directory access was denied by the
    Operating system.

    Any ideas how to solve this problem...

    Thank you
    Lony

    Hi Lony,

    You may not use the operating system directory here.

    You must create the directory object in oracle.

     
    
    create or replace directory temp_dir as 'C:\temp'; 
    
    grant read , write on directory temp_dir to hr; -- Username 
    

    To create any directory, 'create any directory of grant' privilege.

     
    
    declare
        f utl_file.file_type;
        s varchar2(200) := 'Line 1';
    begin
        f := utl_file.fopen('TEMP_DIR','NCW_ET15.log','W');
        utl_file.put_line(f,s);
        utl_file.fclose(f);
    exception
        when NO_DATA_FOUND then
    utl_file.fclose(f);
    end;
    /
    show errors 
    

Maybe you are looking for