How to write the formula 'SUMIF' by the numbers

Similar Questions

• Open XML, how to write the path

  Hello

  I'm new to the Blackberry development and I hope you can help me with my problem. I try to work with an XML file, and so far, all that does very well as long I had the xml file, I work on, in the folder of my java application and deyployed using the desktop software. Now, I tried to put the file somewhere else on the Blackberry and I don't know how wirte the path to the source code. I tried the following, but it seems to be bad:

  private static String _xmlFileName = "file:///store/home/user/documents/test.xml";
  DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
              DocumentBuilder builder = factory.newDocumentBuilder();
              InputStream inputStream = getClass().getResourceAsStream( _xmlFileName );
              Document document = builder.parse( inputStream );
  

  I hope you can give me a hint, how I write the correct path?

  Thank you very much!

  Best regards, jtr87

  PS: Sorry for my bad English, but I did not use it very often.

  You need to do something like that to get your InputStream:

  /** * @return an open InputStream for a file, or null if file does not * exist. * @throws IOException if there is an error opening the file */InputStream getInputStream(String name) throws IOException {
      FileConnection fc = null;
      try {
          fc = (FileConnection) Connector.open(name, Connector.READ);
          if (fc.exists()) {
              return fc.openInputStream();
          }
      } finally {
          if (fc != null) {
              try {
                  fc.close();
              } catch (Exception ignored) {
              }
          }
      }
      return null;
  }
  

  Notice that you must close the FileConnection at some point, regardless of if the call to openInputStream worked.

• How to write the script in FDMEE below.

  How to write the script in FDMEE below.

  Script below is the FDM Script.How write in FDMEE.

  If (varValues (14) '113101' =) OR (varValues (14) '113201' =) OR (varValues (14) '113301' =) OR (varValues (14) = "252111") OR (varValues (14) '156101' =) then

  Result = "21_asd."

  Please help me on this issue.

  Kind regards

  Satheesh, S

  If you want to determine the id of the target account your opening assignment statement must be:

  Account = fdmRow.getString ("ACCOUNTX")

  As if - elif-instructions else keep lowercase stream operators. If you continue a command on multiple lines, then place parentheses is

  If (account == "113101") or (account == "113201") or (account == "113301") or (account == "113401") or (account == "113501") or (account == "113601") or (account == "215101") or (account == "215201") or (account == "215301") or (account == "215401") or (account == "215501") or (account == "215601") or (account == "252111") or (account == "156101"):

  fdmResult = "21_ADNIP".

  should be (also get rid of the unnecessary parentheses)

  If (account is "113101" account is "113201" or account is '113301' account is "113401" or account is "113501" or account is "113601" or account is "215101" or account is "215201" or account is "215301" or account is "215401" or account is "215501" or account is "215601" or account is "252111" or account is "156101"):

  fdmResult = "21_ADNIP".

• How to write the even-odd fill feature?

  How to write the even-odd fill feature?

  Maybe like this:

  app.executeMenuCommand ('* ');

  

  There is a command in the PathItem object named evenodd. I think that if you change the property of evenodd and get a member of a composite path path, you can achieve a desired result.

• How to write the query

  Hello

  How to write the sql query

  I have three type of table as

  1 table emp

  EMP_ID FIRST_NAME DEPT_ID

  ---------- -------------------- ----------

  1 kumar 10

  2 sam                          20

  3 30 damu

  2 table dept

  EMP_ID SALE_ID DEPT_ID

  ---------- ---------- ----------

  1 101 10

  2 102 20

  3 103 30

  3. table sale

  EMP_ID SALE_ID SALE_AMT

  ---------- ---------- ----------

  1 101 7

  2 102 8

  3 103 9

  I want the result as

  EMP_ID DEPT_ID SALE_AMT

  -------      ---------   -            --------

  1                10                  7

  Thank you

  Are you looking for this?

  SELECT T1. EMP_ID,

  T1. DEPT_ID,

  W3M SALE_AMT

  FROM EMP T1,

  SALE T3

  WHERE T1. EMP_ID = T3. EMP_ID;

  OUTPUT:

  EMP_ID DEPT_ID SALE_AMT

  ------- ---------- ----------

  1         10          7

  2         20          8

  3         30          9

  If this is not the case, after the actual output, you need. Because that gives you the amount of sales deptwise

• How to write the 'C' alpabelt within a circle of author?

  Hello

  How to write the symbol of copyright on first Pro CC (ie the alpabelt 'C' inside a circle) ?

  Thank you

  On a Mac, Option + G.

  MtD

• How to write the query option in expdp

  Hi Please someone help me how to write the query option in expdp... .in expdp using the query option...
  
  where AM columnname between 5 May 12 02:57:00.000' and ' 02:59:59.999 6 May 12: ';
  
  
  Please do what is necessary...

  Pavan Kumar says:
  QUERY = (columnname scott.test: "where between 5 May 12 02:57:00.000 h ' and ' 6 May 12 AM 02:59:59.999'")

  Who will fail in databases, because you assume nls_date_format. How it is difficult to put to_date() surround channels? Rather than play with quotation marks, using one parfile thusly.

  query=table_owner.table_1:"where business_date between to_date('20120505025700 am','yyyymmddhhmiss am') and to_date('20120505025959 am','yyyymmddhhmiss am')"
  query=table_owner.table_2:"where business_date between to_date('20120505025700 am','yyyymmddhhmiss am') and to_date('20120505025959 am','yyyymmddhhmiss am')"
  query=table_owner.table_3:"where business_date between to_date('20120505025700 am','yyyymmddhhmiss am') and to_date('20120505025959 am','yyyymmddhhmiss am')"
  

  You do not have to have all the clauses in a single line, as they are side by side parfile, which would be enough. For this reason parfile is better than the command line in order to avoid all the back-citing dance.

• How to write the select query for it

  Hello

  I had an html form and the area I drop down and he needs to select several values in the drop-down box. When I select multiple values then I have to write the query to SQL select statement.

  When I try to write the select statement and trying to run I get the error message.

  Select * from Table

  where emo_no = '1,2,3 '.

  That's how I write the query please suggest me how to write the query to select several values in the drop-down box.

  Thank you

  Use the keyword sql 'in '.  If you don't know how, I've heard good things about the book Teach Yourself SQL in 10 Minutes by Ben Forta.

• How to write the text file in Shockwave?

  Someone knows how to write the text file in Shockwave on the disc of the user?
  
  Thanks in advance.

  These Xtras can cause a lot of havoc when used with the intent to hurt.
  What you can do is to write with setpref and store a list of backups and the
  registers itself separately. Next, you need to build your own save/open
  dialog box for the user:
  * Choose a previously saved file to load or replace
  to create a user type the name of a new file to be saved.

  The only thing that remains is that the user can't decide where files
  are saved.

  Manno

  SiuLinda wrote:
  > Thanks a lot for your answer.
  > Yes, cookies is good, but I have to write a program to save the text file in
  > When the user wants, the user can open these files later if they like as, using
  > Filextra and Fileio, but I found that all these Xtra extensions seem to be not supported by
  > shockwave.
  >

  --
  ----------
  Manno Bult
  [email protected]

• How to copy the numbers in a cell to another cell and gets their total

  500.40

  192932.90

  231838 * 90

  290414 * 15

  222312 * 15

  222314 * 5

  141722 * 20

  Hello, can I ask how to copy the numbers after the period/asterisk to another cell and then add up all the numbers copied without having to type them.thank you

  Hi mirijin,

  

  Break the problem into small steps:

  Step 1. All separators (periods and asterisks) convert the asterisks.

  Formula in B2 (fill down)

  = SUBSTITUTE(A2,".","*")

  Step 2. Find the position of an asterisk in each cell.

  Formula in C2 (fill down)

  = FIND("*",B2)

  Step 3. Extract everything to the right of the asterisk.

  Formula in D2 (fill down)

  = RIGHT (B2, LEN (B2) −C2)

  Step 4. Convert the text to numbers re using the VALUE function.

  Formula in E2 (fill down)

  VALUE = (D2)

  This table has a header row and footer of the line, so the SUM in E9 apply to all cells in the body.

  = SUM (E)

  You can combine the individual forms in a unique and complex formula, or simply to hide intermediate columns B, C and D:

  

  Kind regards

  Ian.

• My keyboard is write the numbers instead of letters

  MY keyboard is write the numbers instead of letters. The firstbletterbiscok, but it converts every letter in a number

  It's very strange. Try contacting Apple Care phone number: (800) 275-2273

• How to write the condition

  Hi guys, I wonder how proceed in Disco Desktop (not admin). How to write exists it as a statement in 'where close.
  
  
  
  Select * from EMP
  where exists (select 'x' emp_1
  where emp_1.sal > 2999
  and empno = emp.empno)
  
  
  I thank in advance.

  Hello
  In order to use a subquery in a condition there must be already an existing worksheet in the workbook. If you do not have an existing worksheet, and then you will always see the ability to create subqueries, but you won't be able to use it.

  Here's a workflow to try using SYSDATE:

  1. first of all, make sure you open the Desktop, not more.
  2. create a new spreadsheet table containing only a calculation, SYSDATE - do you this by clicking on continually Next until you reach step 6 of the wizard, by ignoring the message that says that you have no items in the worksheet
  3. in step 6, click on the new button
  4 let the name of calculation as Calculation0 and add SYSDATE in computing
  5. click on the OK button
  6. click on the Finish button - you now have the current date in your worksheet
  7. in the menu bar, select sheet | New leaf and select the Table
  8. once more constantly click Next until you reach step 6 of the wizard, and ignore the message that says that you have no items in the worksheet
  9. in step 6, click on the new button
  10 let the name of calculation as Calculation1 and once more add SYSDATE in computing
  11. click on the OK button
  12. click on the Finish button - you now have the current date in your second worksheet
  13 remain in the second worksheet, in the menu bar select Tools | Conditions
  14. click on the button new to create a new condition
  15. in article , use drop down the menu and select Calculation1
  16. under the dropdown value (s) , you should see create subquery
  17 notice how discoverer has automatically selected Calculation0? It is the only element so naturally it will be selected. However, if you have more that one discoverer selects an item of the same type of data
  18. nothing to except click the OK button a few times now

  What you have done is said that the SYSDATE in worksheet2 depends on the formula in Sheet1, which is also be SYSDATE.

  To prove that this work, go back to the worksheet sheet1, change the formula of SYSDATE -1before returning to sheet 2 and then refresh it. This time, you should get no returned data showing that the subquery works.

  Moreover, any leaves that you create in Desktop using subqueries will still work even if you cannot change the subquery itself and more.

  Best wishes
  Michael

• How to write the trillion or a quadrillion in scientific notation

  Hi all

  So basically my question is how can I write 5 Billiards (or whatever the numbers as millions or billions or trillions) in scientific notation on my iPhone or the keyboard. Just like below.

  
  

  5 x 10¹⁵

  
  

  I want to type without using the copy paste.

  Thank you for your time.

  Don't know way in a basic text page. You can do this in the application of the numbers, but this isn't what you're asking. The closest I can get is 5x10E15.

• How to write the xml content of a file (Blob data Type) with other columns in file system

  Team,
  We are currently working on oracle 11 g. Suppose that we consider the SCOTT. EMP table for our creation of the table.
  All existing columns of SCOTT along. EMP table allows to assume that this table has an additional column name emp_xml, which is of TYpe of BLOB data and it holds xml data.
  the size of the data blob for each record in this col is greater than 32 KB (normally about 1 GB), now I want to write the contents of this column along
  with enmae, empno, hiredate into an external file. Assume that if we are only to the BLOB column that is emp_xml then the code below works

  Start

  for c in (select emp_xml from your_table)

  loop

  dbms_xslprocessor.clob2file (emp_xml.getclobval (), 'YOUR_LOCATION', 'YOUR_DYNAMIC_FILENAME')
  end loop;
  end;

  but I want empno, enmae, hiredate with blob emp_xml written in the external file. Any assistance in this case welcome.

  Concerning

  max_linesize

  Maximum number of characters for each line, including the newline character, for this file (minimum 1, maximum value 32767). If not specified, Oracle provides a default value of 1024.

  Defines how much you can read or write to a single call. I have to loop through the clob object and I write a pieces of 1024. So there is no limit to how much she can write. Just test it, IT will WORK!

• How to write the condition with the value of the parameter

  Hello
  I'm working on siebel BI publisher report. I am able to display the value of the parameter in the report.
  
  Now, I wanted to do something logical based on the value of the parameter.
  
  for example: If the user changes the value of the parameter then I have to call A submodel if user don't past not any value then it should not display A submodel
  
  can someone tell me how to write that above logic?
  
  If the parameter exists then MODEL of APPEAL one another do not call MODEL A
  
  Kind regards
  JAG

  
  Dial a submodel