How to write to HDD Ext

So I have an Ext HDD that has been formatted in windows. However, when I'm using a mac and drag / drop files it is not written. The funny thing is, when I use another mac, it reads and writes files very well, so I'm able to drag-and - drop without problem. I can't have this problem on a computer that tries im of files to back up. Any idea what is the problem?


Install software such as Paragon NTFS on the Mac who is unable to write to it.


Tags: Mac

Similar Questions

  • Win 7 Pro X 64; system does not recognize my Sata HDD Ext USB Powered clos

    In the recent past, my system no longer recognizes my Powered Sata USB HDD Ext I closed deleted the April May security updates and nothing does not. Two updates would not uninstall: KB3020369 & KB3020370. They were both installed on May 7, just about the time the ext drive was not recognized.

    Thinking that the box Sata or HARD drive was unusable, I bought two new nothing helps. I think the above updates are the culprits. All the other external USB work correctly - key USB & USB powered drives Ext. I tried all the mentioned community wrapper work without result. Need help from MS on how to uninstall the updates above? The only thing I can think of to test my Win 7 should save all the files and images to all readers on an ext HDD and do a clean install without security updates. And then install updates one at a time security test activity USB I'm going. Also, I see other people having the same



    Problem solved. In my case, the external hard drive was plugged in and powered and the external drive appeared in 'surely remove the material and the media', but does not appear in Windows Explorer. It was enough of a drive letter. Left click on start, Control Panel, administrative tools, COMPUTER MANAGEMENT, storage, MANAGEMENT OF DISKS.  A list of drives has been shown. Mine has no drive letter. I have a click right and select the simple volume on the dark line, and followed the instructions.

    Everything is normal and I already copied the files on it. Thank you all for your efforts and help.

  • Where the photos are stored... How to write on a dvd?

    Where the photos are stored... How to write on a dvd?

    How can I backup my photos in Photos?  Can I use a DVD?

  • HP - 50g written problem complex number. How to write (3 + i * 3 * sqr (3)) to RPN? (3, i3sqr (3))

    Hello everyone, I don't know how to write (i 3, * (3 * sqr (3))) RPN mode.

    Can someone help me please? I already searched the gug pdf guide help, without result.

    Thank you.


    A few notes in the representation of a complex number as a vector:

    (1) the i is omitted, the second number is supposed to be the imaginary part.

    (2) the 50 g accepts only decimal numbers for vector representation

    Thus, at the entrance there. I guess you have the calculator in complex mode and exact mode (about not checked in "MODE"-> "SAE"), i.e. "C =" displayed at the top of the screen.

    RPN mode:

    Press 3 then ENTRY (3 is at level 1)

    Press ENTER again (3 is now duplicated and on both levels 1 and 2 - one advantage of RPN)

    Press ENTER again (3 is now duplicated and on levels 1, 2 and 3)

    Press the button of sqrt (x). Level 1 shows a 3 with a sign of the square root.

    Press on multiply key, level 1 shows 3· SQRT (3)

    Press LeftShift (white), then I (above the TOOL key), level 1 indicates an i

    Press on multiply key, level 1 shows 3· SQRT (3)· I have

    Press + key, level 1 shows 3 + 3· SQRT (3)· I have (or 3· SQRT (3)· i + 3 according to the parameter Flag - 27)

    If you want to keep the symbolic result (with the symbol of the 'SQUARE root'), leave it in this form, if you want to convert to vector format press (red) RightShift, then -> NUM (above the ENTER key).

    The result will be a decimal vector shape (3, 5.19615242271).

    Kind regards


  • How to write data in mode intertwined with TDMS C DLL 2.0?


    How to write data in mode intertwined with TDMS C DLL 2.0?

    I use DAQmx features in Visual Studio C++ without Measurment Studio.

    This function returns the data in interlaced mode.

    How can I configure the functions of DLL C TDMS to store this data in the tdms files?

    I see that it is not possible with the PDM version 2.0 with 1.0.

    Thank you

    -TDM C Dll is not able to do

    -TDM header writer may be usable for this but is not able to be used for tdms files.

  • Does anyone know of a VI or how to write one that will stop the computers time be disabled if an application is run.

    Does anyone know of a VI or how to write one that will stop the computers clock be turned off if an application is run. The time and date can be reset normally while an application is running by clicking on the time in the lower right of the screen of the computer. I have an application that runs over several days and it is essential that the time and date of the computer not be changed. Is there an easy way of this lockout the user? Note that I am what I consider a beginner advanced in LV

    Thank you


    This isn't something that you can from LabVIEW, because this is an operating system operation, and it will depend on the operating system you are using. Under Windows, you can use Group Policy to control this. Please Google on "prevent changing the date and time of windows."

    Also, please try to refrain from stuffing your message in its entirety in the block of material. Keep short, but descriptive enough topic so we can understand what you're asking basically. Thank you.

  • How to write a unique number in a single Excel cell

    I'm using Labview 2013 SP1 with the Microsoft Report Builder and I can't understand how to write a number of DP to a specific cell in an Excel spreadsheet. I have no problem writing tables of numbers to specific cell ranges, formatting of cells, the writing of titles, using models, everything I need, except the possibility to write a number to a specific cell. All vi who write the numbers seems to require tables 2D for the entries. I must be missing something, but I think I crossed every vi in the palette of MRG and found nothing.

    Any help/examples were greatly appreciated.

    ... and you probably know that the best way to do it is with build table, twice.

    Note the lines is 'thick' goes from left to right.

    Bob Schor

  • How to write a function block?


    Someone knows how to write a function block with LabVIEW?  Something like those in real time live > function blocks >.

    Thank you very much in advance?

    Assuming you are referring to these specifically...

    .. then the answer is that it is almost impossible to make a new. However, there is really nothing special all that to their topic. They are essentially normal subVIs (which you can learn about the other links) which just happened to have some terminals connected to shared variables. I personally would not normally recommend that anyway. If you could clarify what exactly you are trying to do, it might be possible to give more specific advice.

  • How to write a single line instead of the entire port?


    I followed the example for writing to the digital line as follows

    int taskHandle;

    given int [8];

    char linename [] = "" dev2/port0 / line0:7 ";"

    DAQmxErrChk (DAQmxCreateTask ("", & taskHandle));

    DAQmxErrChk (DAQmxCreateDOChan (taskHandle, linename, "", DAQmx_Val_ChanPerLine));
    DAQmxErrChk (DAQmxStartTask (taskHandle));
    DAQmxErrChk (DAQmxWriteDigitalU8 (taskHandle, 1, 1, 10.0, DAQmx_Val_GroupByChannel, data, NULL, NULL)); Here the data have 8 digits
    SetWaitCursor (0);
    If (DAQmxFailed (error)) DAQmxGetExtendedErrorInfo (errBuff, 2048);
    If (taskHandle! = 0)
    DAQmxStopTask (taskHandle);
    DAQmxClearTask (taskHandle);
    If (DAQmxFailed (error)) MessagePopup("DAQmx Error", errBuff);

    The example above shows how to write 8 binary to 8 lines, but how to write only one line? I try the following code, but it does not work

    char linename [] = "dev2/port0/line 2;


    DAQmxErrChk (DAQmxWriteDigitalU8 (taskHandle, 1, 1, 10.0, DAQmx_Val_GroupByChannel, & data [2], NULL, NULL)); Here the data have 8 digits

    The data format for the DAQmxWriteDigitalLines() function will do exactly what you want.

    The data format for the DAQmxWriteDigitalU8() function is a full port (even if you do not have a value of a harbour full of lines in your task).

  • How to write to the system event log

    Windows 7 Home Premium 64-bit Service Pack 1

    I run a daily work to create an image of my drive system hard. Repeatedly the work began and, due to a material error, be abandoned. In some cases (mostly), this will result in the image of yesterday being destroyed, leaving me with no viable image in case I need to restore. Although the reader is old enough (3 years), I'm not want to replace it, because I know no other activity that has had a problem with it and diagnoses reported no problem.

    So I want to execute a batch file or a script before the regular daily system backup operation. The script would go to a SMART short self-test, and if no errors are reported, would signal the backup task to run. Conversely, if the self-test report any error, the script don't trigger not the backup task to run. I think I will need to write an entry in a kind of system event log, which would be defined in the trigger condition in the entrance to the Windows Task Scheduler for the backup task. If anyone can help with the details of how to write an entry to a log of system events?

    Or, perhaps, there is better way to achieve what I want to do?

    I guess that there is not a very high probability that the script will always truly detect a problem and prevent the last image of the destruction. But I tell myself that it is worth the effort.


    Assuming that smartctl generates an errorlevel nonzero in case it failed, the following script will work, as long as Smartctl is run under the same account as Casper.

    I also made your script more transparent control setting. The if/then/else/if/then embedded instructions are perfect for computers, but are often misconstructed by the human mind. I'm a big believer in the KISS principle.

    OFF @echo
    FOR %%d Ko (% Date %) Today SET = %% A

    SET now = time %
    echo =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.
    ECHO% now %%d now %%d %2
    Si (« %3 « == » »
    echo of the provided insufficient parameters
    output/b 1

    IF/i %1 is goto short Action
    IF/i %1 is goto long Action
    ECHO 1 Parm [%1] is INVALID
    output/b 1

    : Action
    smartctl t %1 %2
    the echo of SECONDS to WAIT for selftest %3
    choice/n/t %3/d N
    smartctl-l selftest %2%

    Set Flag="%temp%\Smartctl.log".
    If exist % del % % flag flag
    If %ERRORLEVEL% is 0 echo. > Flag %

    For the handshake to work, you must place the CASPER command inside a file of commands as follows:

    off @echo

    If exist c:\Casper\Casper.exe '% temp%\Smartctl.log '.

  • How to write a program that allows an HTTPs connection to the APACHE TOMCAT server in blackberry JDE

    Hello.. I am very new to the blackberry JDE environment. But then, I have a project in which I should write a program that will make an HTTPs connection to the apache tomcat server using blackberry JDE. The simulator which I use is 8330-JDE.

    Here is my code...





    Import net.rim.device.api.ui.UiApplication;

    Import net.rim.device.api.ui.container.MainScreen;

    public class Httproto extends UiApplication


    public public static void main (String [] args)


    Httproto instance = new Httproto();

    instance.enterEventDispatcher ();


    public Httproto()


    pushScreen (new HttpsConnectionScreen());



    final class HttpsConnectionScreen extends screen


    public HttpsConnectionScreen()


    HttpsConnection c = null;

    InputStream is = null;

    int rc;

    try {String url =

    " 8443/cit/j_acegi_security_check? j_username = sanogo & j_password = redhat;

    c = (HttpsConnection) (url);

    c.setRequestMethod (HttpsConnection.POST);

    System.out.println ("connection is open with the server");

    Get the response code is open the connection,

    Send the request and read HTTP response headers.

    The headers are stored until asked.

    RC = c.getResponseCode ();

    System.out.println ("response from the server" + rc);

    if (rc! = HttpsConnection.HTTP_OK) {

    throw new IOException ("HTTP response code:" + rc);


    is = c.openInputStream ();

    Get the ContentType

    The string of type = c.getType ();

    The length and process data

    int len = (int) c.getLength ();

    if (len > 0) {

    int actual = 0;

    int BytesRead = 0;

    byte data = new byte[len]; while ((bytesread! = len) & (real! = - 1)) {

    real = (data, bytesread, len - bytesread);

    bytesRead += real;


    } else {}

    int ch;

    while ((ch = (())! = - 1). {



    } catch (ClassCastException e) { throw new IllegalArgumentException ("not a HTTP URL");}


    catch (IOException ioe) {}

    finally {



    if (is! = null)

    is. Close();

    if (c! = null)

    c.Close ();


    catch (IOException ioe) {}




    When I run this program in the Simulator, I can do nothing. Please correct me if I'm wrong in coding.

    As I am new to this blackberry JDE environment, ideas and suggestions on how to write and run the sample applications in the blackberry are more welcomed.



    Make sure that your MDS starts when the Simulator starts.  In the JDE will in Edition > Preferences > Simulator > General and click the checkbox "launch Mobile Data System connection with Simulator Service.

  • C# how to write a XPS virtual printer driver installation

    C# how to write a XPS virtual printer driver installation
    Examples, please?

    Hi Keyum,

    I wish that you post your question here for help.

  • How to write a file using BB 10 HTML5WebWorks


    How to write a file using Blackberry 10 HTML5WebWorks API.

    The example above does not work in BB 10.

    Please guide me.

    Of course, look at line 95 of this file:

  • How to write VBA code that is compatible DEP


    We have a number of VBA macros, Excel. Some users report an error

    After some research, I believe that it is related to the Microsoft Data execution prevention feature. I presume our adds that something that does not like the DEP. Is there a guide on how to write/re-write macros to avoid problems with DEP?

    Thank you


    This issue is beyond the scope of this site and must be placed on Technet or MSDN

  • Open XML, how to write the path


    I'm new to the Blackberry development and I hope you can help me with my problem. I try to work with an XML file, and so far, all that does very well as long I had the xml file, I work on, in the folder of my java application and deyployed using the desktop software. Now, I tried to put the file somewhere else on the Blackberry and I don't know how wirte the path to the source code. I tried the following, but it seems to be bad:

    private static String _xmlFileName = "file:///store/home/user/documents/test.xml";
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                DocumentBuilder builder = factory.newDocumentBuilder();
                InputStream inputStream = getClass().getResourceAsStream( _xmlFileName );
                Document document = builder.parse( inputStream );

    I hope you can give me a hint, how I write the correct path?

    Thank you very much!

    Best regards, jtr87

    PS: Sorry for my bad English, but I did not use it very often.

    You need to do something like that to get your InputStream:

    /** * @return an open InputStream for a file, or null if file does not * exist. * @throws IOException if there is an error opening the file */InputStream getInputStream(String name) throws IOException {
        FileConnection fc = null;
        try {
            fc = (FileConnection), Connector.READ);
            if (fc.exists()) {
                return fc.openInputStream();
        } finally {
            if (fc != null) {
                try {
                } catch (Exception ignored) {
        return null;

    Notice that you must close the FileConnection at some point, regardless of if the call to openInputStream worked.

Maybe you are looking for

  • Satellite L300 PSLB8A - upgrade memory

    I have a Satellite L300 I want to upgrade the memory of at least 2 GB.Looking for suppliers of memory suitable, I am confused by the variety of suffixes added to the L300 category. My poster system unit Satellite L300 label.The model number is PSLB8A


    How to make GAMES to appear in the title bar of MSN Today (Located underneath the BING Search box.)

  • DVD burner does not work

    my DVD A DS8A2L-A ATA device has a code 10 and I tried micro soft Mr. fixit and I can't always burn a cd. any ideas on what to do next?

  • Is there a manual for windows 8?

    OK, call me "Old School" but I really need a manual for windows 8, is that we can acquire?I mean it's like back on an o car which has all the latest this and this. and say, "you'll have fun" How is the person to operate the car if he doesn't know wha

  • Question of sensitivity - to my pen tip!

    Hey,.I really hope someone has a solution for me.I have, until recently, been using Photoshop 7, but have now upgraded to CC.In the new version of Photoshop, the sensitivity of the pen is fickle at best, openly functionless at worst.I tried to disabl