How to write variables in the spreadsheet file

I run an application in run in continuous mode.

One of the variables change over time (it is inside a while loop and is part of the task of data acquisition). I want to record all the values this variable can take during execution and save them in a spreadsheet file?

How this can be done?

Give this example look on.  I am open a file before the beginning of my main loop and its closure after the main loop.  Inside the loop, I am formatting my data in a string of tabs.  I then save this string in the file.

Tags: NI Software

Similar Questions

  • How to write data from the INI file for the control of the ring

    Hai,

    I need to write the data read from the INI file to a control of the RING. Doing this operation using variants I get the error.

    I will be happy if someone help me. I have attached the file special INI and VI.


  • Write to the spreadsheet file (how to start new lines)

    I'm reading signals from a hardware device and try to write it in several columns using Scripture in the spreadsheet file every few seconds.

    My problem is every time a new signal comes in, my program seems to overwrite the previous signal when writing to file, when (say after 2 minutes), I go to check the written file, it shows only 1 row of information. How can I fix?

    Part of my VI and the output file is attached.

    If the program segment shown in your picture is inside a loop, then the section header write overwrites the file each iteration of the loop.  So, you see only the data for the last iteration.  Solution: Move portions header to write and write the names of channel out of the loop or put them in the case of structures that run only when you want a new file or new channels.

    Lynn

  • Write to the spreadsheet file

    Hello

    I try to write in a spreadsheet file.

    There are two things that I try to do what does not the current .vi.

    1. ask a name of file to outside the while loop. For the moment, this happens inside the while loop.

    2. Add to the file (by setting true) does not work as each time the while loop is iterated in this example, it asks me for a new file name. Shouldn't it just add to the file without having to ask a new file name on each iteration.

    Thank you

    If you do not specify the path to the file and then writing on a spreadsheet file asks for the file.  That just the way the function works.  If you go to the range of advanced functions of file, you will find a file dialog box function.  Put outside your loop and pass the path resulting in the loop and writing in the spreadsheet file.

  • Header / data in the spreadsheet file

    Hi all

    I'm writing the header + data as shown in the picture

    It works fine, but the problem is, at the beginning of each table, it's to create a tab as shown in the fichier.jpg 'exit '.

    could you say what mistake I have done

    Thank you

    Nordine salvation,

    Write spreadsheet converted file.vi table entry to a string using the String.vi worksheet default it convert table to string with delimiter tab so get you tab in the spreadsheet file. I enclose a jpg file that will work.

  • How to restore control of the trace file file

    How to restore control of the trace file file?

    say I have a file of trace control file and I've lost all control file copies. The only backup of control file is the control file record.

    What are the steps to follow.

    Version: 10.2.0.4
    OS: Solaris 10

    SQL > alter database backup controlfile to trace;

    After giving this statement, oracle will write the CREATE CONTROLFILE statement in a trace file. The trace file will be randomly
    called something like ORA23212. TRC and it is created in the USER_DUMP_DEST directory.

    2. go in the USER_DUMP_DEST directory and open the last trace file in the text editor. This file will contain the CREATE CONTROLFILE
    statement. It will be two sets of instruction with RESETLOGS and one without option RESETLOGS RESETLOGS.use of the CREATE CONTROLFILE statement.
    Now, copy and paste the statement into a file. Whether c.sql

    3. now open the c.sql file in the text editor and set the name of the database to ica to prod illustrated in the example below (replaced REUSE to the GAME)

    CREATE CONTROLFILE

    Prod to DEFINE a DATABASE

    LOGFILE GROUP 1 ('/ u01/oracle/ica/redo01_01.log',)

    U01/Oracle/ICA/redo01_02.log'),

    GROUP 2 ('/ u01/oracle/ica/redo02_01.log',)

    U01/Oracle/ICA/redo02_02.log'),

    GROUP 3 ('/ u01/oracle/ica/redo03_01.log',)

    U01/Oracle/ICA/redo03_02.log')

    RESETLOGS

    DATAFILE ' / u01/oracle/ica/system01.dbf' SIZE 3 m.

    ' / SIZE of the 5 M u01/oracle/ica/rbs01.dbs.

    ' / SIZE of the 5 M u01/oracle/ica/users01.dbs.

    ' / SIZE of the 5 M u01/oracle/ica/temp01.dbs

    MAXLOGFILES 50

    MAXLOGMEMBERS 3

    MAXLOGHISTORY 400

    MAXDATAFILES 200

    MAXINSTANCES 6

    ARCHIVELOG;

    SQL > STARTUP NOMOUNT;

    5. now run the c.sql script

    SQL > @/u01/oracle/c.sql

    6. now, open database with RESETLOGS

    SQL > ALTER DATABASE OPEN RESETLOGS;

    Thank you.

  • How to open or convert the .avi file on old mac running OS.10.6.8?

    How to open or convert the .avi file on the old mac running OS.10.6.8.  We tried downloading several conversion programs as well as programs that run .avi, but everyone's message could not be opened on the mac or require a fee.  Anyone able to fix it.  We have great audio video file we need to convert.

    Try to use MPEG Streamclip; You can be told to install Perian or another component, or who does not open the AVI file. AVI is a container, not a format; no single component or codec will open all reviews, and some cannot be played or converted in Mac OS X.

    (142484)

  • How to let axSequenceView view the sequence file, after the opening before the race.

    How to let axSequenceView view the sequence file, after the opening before the race.

    I would do it differently, you do not see when running because your sequence control is connected to the requeteexecution Manager. I have two controls of the same size that sits on top of the other, one connected to requeteexecution as it is by default and the other to SequenceFileView Manager.

    You can then use reminders to start execution and execution of end events in the user interface to make the control visible. It is very easy to achieve.

  • Is there a file size limit when using read the spreadsheet file?

    I'm reading in a large file, approximately 52 MB, 525600 lines with 27 fileds in each line using "Read SpreadsheetFile.vi". I then explore table 2D-999, which represents bad/no data in this area and the total number of fields with-999 in there. All works on 3 months ' worth of data. The program is giving me a memory error output and stopping in case reading takes place on the file of the year a large. So my question is that the reading of the spreadsheet file has size limitations? Is there a better way to do it? Thanks in advance for the help.

    ssmith


  • How can I remove all the unused files to clear a space

    How can I remove all the unused files from my computer

    You can remove applications on the control panels.  XP seems to me (im not on a XP ATM machine) programs cpanel

    Files?  you do not (or should not) delete separately

  • PC DM files: my hard drive is currently filled by PC DM files in my folder/Public user folder. How can I safely remove the right files in this folder?

    My hard drive is currently filled by PC DM files in my folder/Public user folder.  How can I safely remove the right files in this folder?  Vista Home Premium 64 bit is my os.

    Hi templar_39,

    DM (Message Delivery) file types are not Windows files, they can be generated by a third-party program.

    This particular file type is often associated with audio data and can be hosted on some cell phones to be used as ringtones or multimedia clips. To my knowledge, these files can be generated by your mobile phone.

    Note: you can go ahead and remove these files only if you notice that the files do not contain any important information.

    If this happens without connect you all devices (like mobile PHONES), this may be a virus or malware activity. You can run a virus scan to get rid of them

    Step 1: A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I re - attach the data files for the programs?

    Original title:

    reconnection of the files

    BONE had to be reinstalled.  All data is saved but lost programs.  Programs now reinstalled, but how can I re - attach the data files for the programs?

    Hello

    You copy the data on your computer (Documents, Photos, etc.) and file extensions should be automatically associated with programs they have written in.

    Otherwise:

    "Changing programs by default by using Set Program Access and defaults of the computer"

    http://Windows.Microsoft.com/en-us/Windows/set-program-access-computer-defaults#1TC=Windows-7

    "How to change file Associations in Windows 7 and Windows 8.

    http://www.7tutorials.com/how-associate-file-type-or-protocol-program

    See you soon.

  • How to extract information from the ovf file from a file of eggs by programming?

    How to extract information from the ovf file from a file of eggs by programming?

    Hello

    Please provide details:

    -On what OS you are programming (Linux, Windows,...)?

    -What programming or scripting language do you use?

    An EGG file is just a tarball of hard, .ovf and .mf files. The .ovf file is always the first. For example, on a Unix like operating system, this should be easy.

    For Windows, there are several options available to manage programmatically the tarballs. See for example http://www.codeproject.com/Articles/470999/tarlib-Windows-TAR-Library.

    And the ovf itself file is in XML format. For handling XML files are libraries available for literally every OS and programming language.

    Google is your friend.

    Andreas

  • How do I "save under" the new file in Acrobat DC

    How do I "save under" the new file in Acrobat DC

    In Acrobat, use the file menu > save as...

  • How to assign a calculation to a variable in the RTF file?

    Hello


    I play a series of if - end if statements to calculate the "Days_Late."

    <? If: DAYS_LATE < 0? > <? xdoxslt:round ((somme (if: DAYS_LATE) div count (PAYMENT)), 0)? > <? end if? >

    <? If: DAYS_LATE = 0? > * <? end if? >

    <? If: DAYS_LATE > = 0? > <? xdoxslt:round ((somme (if: DAYS_LATE) div count (PAYMENT)), 0)? > <? end if? >

    I would like to assign the code above to a variable and use this variable in the following logic <? xdoxslt:IfElse (VARIABLE > 0, round (VARIABLE),-1 * round (xdoxslt:abs (VARIABLE)))? >

    to exercise a function of round_up ("symmetric" rounded). Oracle doesn't have a function for this yet...


    How can I make this work directly in the .rtf file?


    Thank you

    ATP

    Hi all

    I didn't change the data (sql).
    Also, I tried to make it work using the xdoxslt:set_variable () and xdoxslt:get_variable () functions. However, this was not necessary and makes more complex than required.

    It is now resolved using a formula of symmetric rounding (rounded to 0):

    I replaced the VARIABLE with my calculation: (sum (DAYS_LATE) count (PAYMENT) div)

    Thanks a lot for the replies and offers to help her

Maybe you are looking for