How Toshiba recommends Windows Vista for models of europe?
My problem is very simple and not complicated. I bought a new laptop to run Windows Vista. Then after I bought a Windows Vista. Everything is clear, there is no problem. However, I tried to laptop and vista to Vista release date. When I be able to install vista on my laptop Toshiba A100-912. Star Toshiba recommends Windows Vista, there is no official Toshiba drivers for my laptop.
I think that Toshiba recommends Windows Vista for my laptop, what model is the Satellite A100 (PSAA9). Am I wrong?
PS to the Forum Admins: Please do not edit my post.
Thank you.
On the Toshiba Canada website, you can also download some Vista drivers:
http://209.167.114.38/support/download/ln_byModel.asp
@pattayamad
Can you please send how and where did you find this link. It s very interesting because I searched on the site of Toshiba UK and I have not found!
Tags: Toshiba
Similar Questions
-
How to: reload Windows Vista OP on my Toshiba LT!
I have a Toshiba Satellite P305 S8820. Last night after a reboot, it didn't start Windows (Vista).
I need help to find a solution to reload Windows Vista for my lieutenant an another LT (which I use) has Vista on it, is possible to copy Windows Vista operating systems it load in my LT?I need the solution as close to free as possible! I am broke seriously.The MytechGurus and the number of 1800 said that you guys could send me the steps to take and how to install it.So far there are no F8, it just goes to the Toshiba Logo where you can access F2 (Bios I think) and F12. Day and night, I tried everything I could think and search on google. Put the CD/DVD drive 1st in boot order (after trying to return to the default settings) with my Toshiba Recovery CD - it was useless. The Guru has said you must have the Windows Op CD, but Toshiba does not understand that! I also tried the 0 and R and C and nothing happens but the screen pretty empty after logo Toshiba (where windows is supposed to load) and then beeps to push the pesky buttons. I also tried Ctrl alt del and just becomes it works for the same process of death after the logo screen. I did the whole thing from the battery and the charger also.Basically, Windows does not start.I'm not surprised, since Vista makes sometimes fragmentary, but its never been THIS bad.Please PLEASE please help me!My life is on the LT model, seriously, and I need it back.RatHello
You cannot copy files from Vista at the other toshiba to recharge your
If you have problems with the process of recovery of manufacturers, contact the manufacturer
It's their recovery process not microsofts
Here are the different ways to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp
____________________________________________________________
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
__________________________________________________________
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
____________________________________________________________
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
How can I fix error 8007371c code for "Cumulative Security Update for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2936068).
Melvin,
Please contact the Microsoft Community.
I only see the answer from here-
Let us know if you have problems with Windows in the future.
-
How to manage Windows Vista power management features
Hi guys
I searched a bit in the technical knowledge of the Toshiba and found a very interesting article on Windows Vista power management features.
* [How to manage Windows Vista power management features | http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm] *.
The fact is that you will not find one tool of Toshiba Power Saver on Vista as on Windows XP laptops and the parameters energy saver is a bit hidden in Vista power saving settings.
But you can also control some options as a method of cooling or power saving Mode.
I think that it could be interesting for some people here in the forum!
Greetings to all!
Thanks JayJay.
-
Original title: Windows Update security for Internet Explorer
Update cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2675157)
This update does not install on my computer. The error code is error details: Code 80071A2C.Please let know us if you have any information on how to install this update.I used MR. Fix and it still won't install.I use Google Chrome - whatever?Thank youHello Ariel,.
See the steps mentioned below and check if that helps.S tep 1:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Step 2:
You can try to download the standalone update package and check if it installs:MS12-023: for Internet Explorer Cumulative security update: 10 April 2012Step 3:Try to reset the settings of Internet Explorer and then try to install the update.How to reset Internet Explorer settingsNote: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.Hope this information helps. -
I'm unable to install the update for Windows Vista for x 64-based systems (KB972145). Whenever I try, I get the error code 80070570.
0 X 80070570 - ERROR_FILE_CORRUPT
The file or directory is corrupted and unreadable.Perhaps it is the update itself that is corrupted, try to manually download and install the same:
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=enIf this does not work maybe reset - WU
http://support.Microsoft.com/kb/971058/en-us
How to reset the Windows Update components?Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
He tried to install since 10 December and fails every time with this error.
someone at - it suggestions?
Hello
How to fix Windows Vista error 800b0100 update
http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/Error Code 800b0100 in Windows Update
http://www.instantvista.com/800B0100.htmlError message when you try to use Microsoft Update or Windows Update Web sites to install
updates: "0x800B0100.
http://support.Microsoft.com/kb/956702
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I want to download recovery cd windows Vista for Compaq CQ60-110EE
I want to download recovery cd windows Vista for Compaq CQ60-110EE
and I want to upgrade processor but idon't know this laptop supports processor? /
[Personal information]
Downloads are not available, recovery discs need to be ordered at HP, then they post them to you.
Thanks for posting your complete product number, and I'll see which processors are supported on this model.
http://h10025.www1.HP.com/ewfrf/wc/findModel?cc=us&DLC=en&LC=en
#2
Please do not post your s/n
-
Error message below Re: I got the cumulative update for IE 9-64 - bit to fail repeatedly. The error code is listed below.How much of a problem is the following and, if serious, how can I get the system to install this update? I'm running Vista 64 bit and it is patched to date - with the exception of this one.
Update cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465) installation failed
Error details: Code C 8007371Help and Support: http://support.microsoft.comHello
Thank you for reaching out to the Microsoft Community.
According to the description, it seems that you have found a 8007371 C error code while trying to install update Cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465).
I understand the inconvenience you encountered. I will certainly help you with this issue.
I suggest you to refer to the advice given by Karena R on June 10, 2010 and check if it helps.
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
For more information, visit the following link and check.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.
-
I tried to do the automatic update of the KB2585542 on my PC which runs on Vista 32 bit. Whenever I try to install it, I get one above mentioned the error code. I ran an anti-virus, anti-malware & a reg clean and then tried to install it but I still get this error.
Hello
You are able to install all other updates of Windows without any problems?
Follow these methods.
Method 1: If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error. After you run the analysis tool, try to install the update.
You can download & run the system update readiness tool and check.
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2Method 2: If this does not help, you can temporarily disable antivirus software, and then try to install the update.
Disable the antivirus softwarehttp://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 3: If the methods above do not help, you can place the computer in a clean boot state, and then try to install the update. Follow these steps.
Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, place the computer back to normal following KB article.
Step 2: Now, try to install the update manually.
You can go to http://www.microsoft.com/download and use the number of the update to download and install it.Reference: the problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully.
Other updates DO not seem to be successful.
Error code is 8007371 C.
How can I get this update successfully.
Windows Vista Home Premium Service Pack 2, 64-bit system.
Thank you
Hello
You can view these methods:
Method 1: Temporarily disable the security software
I suggest you to disable temporarily any them program of security on your computer and check if it solves the problem.
After reviewing the question you must reactivate the security on your computer program.Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
Method 2: Reset the Windows Update components
Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Just click on the link below and follow the instructions.
How to reset the Windows Update components?http://support.Microsoft.com/kb/971058
Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/
Method 3: Clean boot
I suggest to clean boot and try to install the update.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.Once you make these methods try to install the update and check if it works.
See the following links:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
It will be useful.
-
Link ThinkPad running Windows Vista for LG LE5300 LEDTV with VGA cable / VGA
How can I connect my laptop Lenovo Thinkpad X 61, running Windows Vista for LG LE5300 LED TV using VGA cable VGA?
Just TV can not detect any signal from the laptop. However, for Windows 7, no problem at all. Could it be because my laptop doesn't have the driver?
Hello
Run the windows Upgrade Advisor 7.
-
How to integrate windows vista with service pack 2? I need to run an inplace upgrade.
How to integrate windows vista with service pack 2? I need to run an inplace upgrade. I have a corrupt installation of SP 2 and I can't uninstall SP 2 I have been informed that the only way to do an inplace upgrade is with a sp2 disk unfortunately I do not have a disc of vista SP 2. can someone give me a complementary statement?
Hello
1. what happens when you try to uninstall service pack 2?
2. do you get an error message?
I suggest you to see this link on how to uninstall service pack 2 for Windows vista:
Check if that helps.
-
? How I support windows vista on cd to reinstall it on my other computer that wont start up. He's wiped and there is no recovery disk. It also has stickers with license numbers.
Hello
There is no download free and legal Internet for vista
Here are the different ways to reinstall vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
I get error Code 8007371 B. I tried several times to install and it still fails? What can I do to have it installed.
Hi CSAMaximus,
(1) how long have you been faced with this problem?
(2) what is the complete error message you receive?
Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Download and install the tool of the system was last updated
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
http://support.Microsoft.com/kb/947821
Method 3: the clean boot computer and then try to install the updates.Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Maybe you are looking for
-
I rented the movie and proceeded to go to google play to see. It acts like it is loading, but the screen goes black and a message says: "there was a problem playing the video on this browser. Try the movies play & TV Chrome App. Learn how to install
-
I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize. How do I reset this transfer without any? I transfer a 5s to itse
-
Upgrading RAM and HDD on Equium A100-027
Hello I have an Equim A100-027 and I already upgraded the two 512 MB to 2 GB 2 memory chips which is the maximum I can get? I've also already installed a hard drive over a 350GB one, but I'm looking to install a high - what is the maximum size that I
-
Went empty Suring battery installation - now I can't start Satellite L300
I bought a new Satellite L300 and installed installation went empty for the first time - during the process.No more chance to install again, no CD available, software (Vista Edition home premium) must be started from the hard drive that does not work
-
Connection to multiple devices sequence using FF Fieldbus Foundation open VFD
I am trying to connect to multiple devices on the same bus fieldbus. When I tryto connect using 'FF VFD open' admission that he is VFD tag (I left it as)by default (0)). I can connect to a device, he questions and close the connection.However, when I