How update the graphics drivers that i didn't install the card myself?
Map of the laptop I had installed myself,
So, how then update the graphics drivers?
Thank you
Hello
As graphics hardware is already installed on your laptop, go to the website of the manufacturer of your laptop > drivers download Section > then key in your number cell phone model > find your operating system (Windows 7 32-bit or 64-bit) > finds two recent graphics / video or the drivers of the Chipset (depending on how it is formulated) and download and install.
See you soon.
Tags: Windows
Similar Questions
-
Update history site says that I managed to install KB 263880. Ko 2572073; Ko 2518864 on my two computers. Yet, icon on the toolbar shows updates to do. @ Update site is the same updates available for download. You run ESET AV; Scan Windows security + fix (@ aggressive setting). The results show no infestation. Icon remains on the toolbar of the two computers, same updates are available @ update site. @ Quick ESET go to site was updated several times. Have also run successfully system restore. Site Update says these updates files have zero content + don't take no time to download. Have made several times this loop. Need a solution please.
Hello
1. what Microsoft fixit you talking?
2. don't you make changes to the computer before the show?
Please follow the steps from the link below.
-
Good afternoon! I had a problem with Adobe Muse to pay. I was transferred to the free subscription. In a letter to the mailbox said he indicated that the need to update the card payment in detail, but I can do, and the site gives an error. Credit card remains the same.
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
Satellite P750 (PSAY1A) - How update the recovery partition?
Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.
My Toshiba Satellite P750 (PSAY1A-01Y022) the factory settings has 132 update of Windows that should be applied during the first pass. I had to run Windows update 4 times before she shows "up-to-date". Not to mention drivers Toshiba as well.
I also want to include some applications (Microsoft Office and other software and utilities)...
Overall, I spent 2 days just to bring it t the State I want in.
But I can't just access the recovery Partition (of the less any of this!)If you look at disk management, the recovery Partition is not a Volume name and that the file system is empty. If I right click on the recovery partition... all I see is "Help" Option
I tried to assign a drive by using Diskpart letter... but it doesn't show much.
My guess is that it is GBT/EUFI.Does anyone have experience updating the recovery Partition?
> Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.
What do you mean by update recovery partition?
The recovery partition should NOT be touched!In which case you'd change the partition, the HARD drive recovery process could not be started!
Probably, you have not understood the meaning of such a HARD drive recovery procedure.
It's the option provided by Toshiba and the recovery of HARD drive allows you to establish the notebook to factory settings; on the same State as at the first day of the purchase. -
Satellite A40: How update the BIOS because I only have half of the Bios
Hi guys
I went to the local with my satellite A40 computer store because I only have half of the bios!
I sent an email to support technique German toshiba and they said to try a bios update (which put bare in mind I still don't know how to do), then we have sent my laptop in a local computer store and told them the problem they do not put me to update the bios on a processor cempron.Why not? What are the risks in need to know.
Please help me because I want to in the future might be upgraded to vista?
Hello Daniel,.
I'm a little confused about your message from Mr.
What do you mean with half of the bios is enough?
What s wrong with the BIOS?The support from Toshiba said-> try a BIOS update.
On the Toshiba page, you can download the BIOS for Satellite A40.It seems you didn't check the download page detailed because on this page you will find this statement:
IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07The update of the BIOS has been detailed described in this document and that you follow these guidelines for the update of the BIOS.
Good bye
-
How update the calendar in the mapping of period FDMEE source
Hello
We are looking to update the calendar in the mapping of period FDMEE source.
I have attached the screenshot. Once I chose the MD (jan - Dec), the year GL calendar details up to 2014 is coimg upward where 2015 is still missing.
We would like to know how to add details to the year 2015... where this timetable is maintained.
Our source is Peoplesoft General Ledger and target is "ARM."
Please notify.
Thank you
Rigot
I assume that the timetable is kept in TFTP so if 2015 has been another year added you initialize again your source system.
Have you already tried?
Concerning
-
ScriptUI: How update the values from Listbox? (CC2014)
Is there a way to update item listbox that filled with the elements of the array JS. If I push more items in the table, how do I re - make in ScriptUI? Is there any way to do this.
I know there are average just to add items to the listbox as in PDF of Peter Kahrel. But it's not so dynamic:
var w = new Window ("dialog"); var myList = w.add ("listbox", undefined, ["one", "two", "three"]); var b = w.add ("button", undefined, "Add"); b.onClick = function () {myList.add ("item", "zero", 0)} w.show ();
What would you say if I wan't to update the listbox when I changed my paintings, as below:
// Create example array var testArr = ['item1', 'item2'] $.writeln(testArr.length); startGUI(); function startGUI() { // Window var win = new Window( "palette", script_name, undefined, { resizeable:true } ); win.orientation = "column"; win.alignChildren = ["fill", "fill"]; // Listbox var myListbox = win.add ("listbox", undefined, testArr, { numberOfColumns: 1, showHeaders: true, columnTitles: ['Name'] }); // Add Item To Array var addItem = win.add("button", undefined, "Add Item"); addItem.onClick = function() { testArr.push ('item3'); $.writeln(testArr.length); } // Quit BTN win.quitBtn = win.add("button", undefined, "Close"); win.quitBtn.onClick = function() { win.close(); } win.show(); }
There may be some update on ScriptUI funtion. I tried to look for the solution without success. Any help?
I've updated your own script to show how I removed the listbox
I added a group to host the listbox control, the purpose of the group is to be used as a placeholder (to add the new listbox to the right place) and easily get the listbox to delete
// listboxEditFromJSArray.jsx - Sakari Niittymaa // https://forums.adobe.com/message/6785515 //#target illustrator // Create example array var testArr = ['item1', 'item2', 'item3']; startGUI(); function startGUI() { // Main Window var win = new Window( "palette", "Test Listbox", undefined, { resizeable:true } ); win.orientation = "column"; win.alignChildren = ["fill", "fill"]; // Listbox Group var grpListbox = win.add('group'); grpListbox.alignChildren = ['fill', 'fill']; var myListbox = addListBox (grpListbox, testArr); // add ListBox function addListBox(container, testArr) { var listbox = container.add("listbox", undefined, testArr, { numberOfColumns: 1, showHeaders: true, columnTitles: ['Name'] }); return listbox; } // BTN: Add Items To Array var addItem = win.add("button", undefined, "Add Item"); addItem.onClick = function() { testArr.push ('item' + (testArr.length + 1)); grpListbox.remove(grpListbox.children[0]); myListbox = addListBox (grpListbox, testArr); win.layout.layout(true); //updateListboxArray(myListbox); //$.writeln (testArr.length + " " + myListbox.items.length); } // BTN: Remove Selected var removeSelectedItems = win.add("button", undefined, "Remove Selected"); removeSelectedItems.onClick = function() { // Remove selected listbox item from array testArr.splice( myListbox.selection.index, 1 ); updateListboxArray(myListbox); } // BTN: Clear Listbox var removeAllItems = win.add("button", undefined, "Clear Listbox"); removeAllItems.onClick = function() { // Clear the array testArr = []; updateListboxArray(myListbox); } // Update listbox items function updateListboxArray(listbox) { // Clear listbox first listbox.removeAll(); // Create new listbox items from array var i = 0; while (listbox.items.length < testArr.length) { listbox.add ("item", testArr[i]); i++; } } // Quit BTN win.quitBtn = win.add("button", undefined, "Close"); win.quitBtn.onClick = function() { win.close(); } // Window Settings win.onResizing = function () { this.layout.resize(); }; win.onShow = function () { win.layout.resize(); }; win.center(); win.show(); }
-
How update the vmware tools on the guest or virtualcenter
Hello
We run a store where we support some linux boxes. We had some problems with time drift and other things and on our vmware guy suggested put us the version of VMWare tools on the guest or virtual Center. The only problem is that I can't find a procedure for this.
To clarify, I'm not how to install VMWare tools on virtual machines. We know how to do and we know to recompile after we patch the kernel. But our guys VMWare suggests that in the end we're just recompile the same old version of VMWare tools to make it work with the new kernel.
In fact, we suspect the version we have is very old, that we have not successfully updated because we were running on 2.5 and are now running on 4.0 Update 1 (wait for the 4.1 support nexus is added).
Thank you
Dan
Welcome to the forums!
So I assume you mean updating the source VMware Tools, which is then used to update VMware tools in guests?
The guy from VMware is true, recompile the tools is necessary after a kernel update has been done. It is not up-to-date version. However, you must do that to make them work again.
The latest VMware tools comes with the latest product or updates/patches for this product. Information shows that the tools are not updated after you apply this hotfix or an update.
They also can be downloaded here (for ESX 4.x) : http://www.vmware.com/patch/s3portal.portal?_nfpb=true&_windowLabel=SearchPatch&SearchPatch_actionOverride=%2Fportlets%2Fpatchupdate%2FdisplayAllBundlePatches&_pageLabel=s3portal_pages_downloadPatch_page
AWo
VCP 3 & 4
\[:o]===\[o:]
= You want to have this ad as a ringtone on your mobile phone? =
= Send 'Assignment' to 911 for only $999999,99! =
-
BlackBerry 10 how update the OS using the Mobile network?
Hello... I recently bought the Z3 that came with OS version 10.2.1.3412 and SR 10.2.1.3054.
Now the device demonstrates that this new update is available which is SR 10.3.2.2474.
I don't have a Wi - Fi connection, I also tried updating via BlackBerry Link and on the Web, each time it displays an error.
Is it possible to update the operating system on the Mobile network?
Please give your suggestions.
Thank you.Possibly, if you have a plan hotspot on the account on the sim card.
-
How update the content id when importing via archiver
Hello Experts,
I need to migrate some documents one env to another (about 500).
The problem is all content IDS are duplicated between the content source and target servers.
even if they have the same ID of content that they are not duplicate/revisions of the existing element.
I'm looking for a way to add them to the system as a new item.
Is it possible using what content ID can be re-created in the target Content Server when I import them.
I thought to use the cards to import == > map of value, but the update of 500 entries manually is a huge task.
One of the alternatives that comes to mind is programmtically export update archive.hda, with
Clauses like "0:IPM_000878:dDocName:IPM_000878_MG, 0:IPM_000888:dDocName:IPM_000888_MG, 0:IPM_001217:dDocName:IPM_001217_MG.
Please let us know of your entries.
Thanks in advance for your support.
see you soon,
Patricia
In your example had, simply add '_MG' to the existing value of dDocName to force the uniqueness. You can easily do so in an archiver import plan as shown below and simply import the archive.
-
How update the column in the table based on the value selected in apex4.1
Hi all
I have the following tables,
and it has the values as follows,leave_type table,it has the following fields, 1.emp_name, 2.sick 3.casual
leave_master table and it includes the following fieldsemp_name sick casual guru 10 10 mishra 10 10
I have the form based on the table "leave_master"1.emp_name, 2.leave_type 3.no_of_days
Here, the leave_type has the LOV which includes.
sick and casual.
When the form is filled out and clicked on the button submit,
I need to update the column leave_type in table leave_type,
for example,.
then I want to update the leave_type column,if emp_name:guru leave_type:sick no_of_days:3
sick sick = - no_of_days for the 'guru' of name
That is to say, ill = 10-3 = 7
then the leave_type of the table must be,
someone can such me what code or method I can use?emp_name sick casual guru 7 10 mishra 10 10
Thank you.
Published by: Gurujothi on May 24, 2012 21:54
Published by: Gurujothi on May 24, 2012 21:54Try something like this...
BEGIN
IF: PXX_LEAVE_TYPE = "Sick" THEN
UPDATE LEAVE_TYPE
THE PATIENT VALUE = SICK -: PXX_NO_OF_DAYS
WHERE EMP_NAME =: PXX_EMP_NAME;
ON THE OTHER
UPDATE LEAVE_TYPE
DEFINE CASUAL = CASUAL -: PXX_NO_OF_DAYS
WHERE EMP_NAME =: PXX_EMP_NAME;
END IF;
COMMIT;
END; -
How update the name and the date of last update its?
Hello
In a data entry form, I have Undated_On and Updated_By fields.
I put & APP_USER. and to_char(sysdate,'DD-MON-RR') than their default values.
When the saved data are changed, I want the name and date of update the last updated person.
But even if I update with different user login ID, only the default values are displayed.
How can I change the name and the date of last update its?
Thank you
Guy
-----
H5. FYI, I am very new to SQL, PL/SQL, and APEX. Would appreciate much more explanation and full path (for example. Shared components > change the security attributes > VPD)Hi guy,
I have a form based on the employees table. If someone makes any changes on the form, it will update the user_id and last_updated columns in the table. I use the trigger on the table to update these columns:
CREATE OR REPLACE TRIGGER biud_employees
FRONT
INSERT OR UPDATE
ON employees
REFERRING AGAIN AS NINE OLD AND OLD
FOR EACH LINE
Start
: new.user_id: = nvl (v ('APP_USER'), user);
: new.last_updated: = sysdate;
end;
/It will be useful.
Thank you
Zahid -
How update the values in ValueChangeEvent...
Hello world
I use Jdeveloper 11.1.2.0.0.
I have a scenario as follows. I have 2 fields like password and Confirmpassword.
I wrote a ValueChangeListener for the password field to make some validations and I wrote an other ValueChangeListener for the field Confirmpassword inorder to compare values entered in the two fields.
But here..., event in ValueChangeListener field Confirmpassword, iam cannot retrieve the password field value to compare.
The reason is... ValueChangeListener is located in ApplyRequestPhase/ProcessValidationsPhase and updated the values in UpdateModelPhase values are so not updated and impossible to get in the ValueChangeListener event.
In order to update the values of the tree of components in case of ValueChangeListener, I tried to use code below
valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());
But the values are not updated... Please suggest me to complete my scenario. Do what is necessary. Thanks in advance.
Concerning
Leprince
Hello
Change the scope of the bean to viewScope.
Kind regards
-
(I looked for this information, but I can't find the answer.)
I have a 8500 XPS which planned to be delivered on Friday. I got the 7570 stock, because I wanted to shop for my own card. I think of a Ti-7870 or a 660.
1 how long a updated video card maybe? (One of the cards that I watch is 10.5 "long.) That fit?)
2 I have search in a third party card that will let me know if it will work with Windows 8/UEFI? I read a few posts on the machine does not not with some spare cards.
I've not ridden a PC in a long, long time, and I fear that the new mother/CPU card technology is way beyond my comprehension. This PC had the kindness of an impulse buy, and I'm starting to regret it.
Thank you.
Card full size can be 12 inches long and 2 wide slots.
'normal' PCI card is specified as a height of 107 mm (4.2 inches) and a depth of 312 mm (12,283 inches)
-
Want to update the card wireless x 220
I would like to update the map on a 220 x wireless and wanted to know what would work better for reliability, speed, and distance. Also if I could add a card with Bluetooth would be a plus. Map of the 220 x is now a 1 x 1 11 b/g/n. There is a front camera of my camera.
Looks like the best you can get is AGN 2 x 2
http://support.Lenovo.com/en_SG/product-and-parts/detail.page?docid=PD013599#7
Maybe you are looking for
-
just updated with the latest firefox - please tell me how to get rid of him and go to what previous firefox, I got with ONLY with Google Search as my only home page
-
Hello!!! Is it possible to create a folder that can hide files automatically, when they are copied in it? I mean how to program a folder so that everything that he would automatically become hidden? I would be very grateful...
-
I can't access internet after installing Service pack 3
Original title: service pack 3__ I recently downloaded service pack 3. Now I have access to the internet. In addition, if I try and uninstall it, I get an error that the program does not exist.
-
CUCM (Cisco Jabber) - VCS - MCU (failed appeal of SIP - SIP)
Hi all in our Videoinfrastructure, there is a little problem with cisco jabber client registry on the CUCM to our MCU. The MCU is inscribed on the VCS. If I make a call my Client of Jabber Cisco SIP call has failed. I call the number 4925488XXX. The
-
WMP 12 is not an album I downloaded from iTunes.
original title: WMP 12 is not an album I downloaded from iTunes. It is located in the iTunes Music folder, but does not appear in the library of WMP 12. I use Windows 7 on a new PC and I also use iTunes. Albums and songs that I already downloaded on