How you uninstall printers that are waiting for jobs left?

Printers have been placed offline sort, but are waiting for print jobs. Try to uninstall them so that restarting windows can reinstall them.

Hello

1. for how long are you facing this problem?

2. don't you make changes before this problem?

I suggest you to perform printer troubleshooting.

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

To uninstall the printer.

http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

Check out this link below to install the printer drivers.

Find and install printer drivers

http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

Note: If there is no pending jobs, he had to be cancelled from the system tray and then you can proceed to uninstall it.

If the above does not work, then try to uninstall programs and features and uninstall it will ask you to remove or delete pending tasks available in the status bar.

Tags: Windows

Similar Questions

  • How to uninstall fonts that are not yet listed?

    I have a font that is really exotic and I don't find it in my list of Windows fonts to remove. Anyone know how I can get rid of him?

    I bought the HP system recovery discs but am wary of their installation.

    Thanks in advance for any help.

    Have you installed any software or display fonts as suitcase or Font Explorer?

    If not, the fonts are removed in one of two ways: by using the control panel-> Fonts, locate the fonts in the list and delete it - or - work stations, find the name of the policy file (which may be different from the name of the font), remove it.

    That said, what is the name of the font? What was it? [OpenType |] TrueType | PostScript Type 1] what was the source? [Provided with windows |] Came with another application {application name, please} | Got source commercial/shareware/freeware] what is the name of fonts in font of the registration program? What is / are the name of the file/s?

    Tom Ferguson

  • How to uninstall programs that are not listed in the file of control panels?

    I want to uninstall windows defender and norton, so I can install another security system and they are not in the control panels uninstall file.

    You cannot uninstall Defender; It is a part of the Vista operating system.

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

    Enable or disable the Windows Defender

    http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

    For Norton, download and run the above Norton removal tool.

    See you soon. Mick Murphy - Microsoft partner

  • I ordered a student member, discount prepaid option yesterday and in the status of the order, it is said that they are waiting for the documentation. How do I provide this?

    I ordered a student member, discount prepaid option yesterday and in the status of the order, it is said that they are waiting for the documentation. How do I provide this?

    For more information about the provisions of the student/teacher, you can refer to the following information page:

    http://helpx.Adobe.com/x-productkb/policy-pricing/Education-FAQ.html#main_submit_poe

    Another good resource for information is the student and teacher edition information forum:

    http://forums.Adobe.com/community/download_install_setup/student_and_teacher_edition_infor mation_? view = discussions

    Here are some links about the Adobe student discount:
    http://www.Adobe.com/education/students.edu.html?showEduReq=Yes

    http://www.Adobe.com/education/student-eligibility-Guide.edu.html

    http://www.Adobe.com/education/students/how-to-buy-eligibility.edu.html

  • When I try to download apps on windows store, it shows that they are waiting for download and they keep showing pending

    Original title: Windows store does not work

    Hi... when I try to download apps on windows store, it shows that they are waiting for the download but they never download at all, they keep showing waiting... and apps are never download... and internet works also very well... so, what was the problem with the windows store? ...

    Hello

    I recommend you download and install Windows App troubleshooting using link:
    Also makes us say that it shows any code or message?
  • How can I get a list of jobs that are planned for the days of the future

    How can I get a list of jobs that are planned for the days of the future?

    In a previous article, I found a query that lists the scheduled tasks that are already running. Can I get a similar request for the future days which is compiled?

    Hi sreedevir,

    SELECT jobmst.jobmst_prntname, jobmst.jobmst_name, jobrun.*

    FROM jobrun JOIN jobmst ON jobmst.jobmst_id = jobrun.jobmst_id -joining tables jobmst and jobrun

    WHERE jobrun_proddt > = dateadd (dd, 1, datediff (dd, getdate())) 0, -future dates

    AND jobmst.jobmst_type = 2 -given jobs (and not groups)

    ORDER BY 1, 2 -Sort by name of the parent, then by task name

    Feel free to make any changes to your reporting needs

    ARO

    The Derrick

  • How you uninstall photoshop elements 13 when the windows uninstaller does not work?

    How you uninstall photoshop elements 13 when the windows uninstaller does not work?

    Hi James,

    You can follow the article: use the Adobe Creative Cloud cleaning tool to solve installation problems and use Adobe Cleaner tool that helps you to uninstall the application.

    Let us know if it works or not.

    Thank you

    Yann Arora

  • We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

    Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

    Version for esxi: Patch 5.1 level 7

    Virtual center of version 5.1

    Source of storage - IBM v7000

    Destination storage - Hitachi


    Questions:
    Events of breach RPO
    Consolidation for the VM disk failure
    Delta abandoned events
    Time change events
    NTFS error and warning (event ID: 137, 57)
    RDP disconnect and ping does matter
    Standby error
    Volsnap error
    Stop the server and offline issue
    Install vmtools emits automatically

    well, in this case, we need to disable the standby of the end of the replication.

    So that everything in triggering replication does not trigger the snapshot of the suspension.

    Then test the if you get these errors.

  • Is there documentation that lists versions of CITRIX that are compatible for installing creative cloud?

    Is there documentation that lists versions of CITRIX that are compatible for installing creative cloud?

    See the link below:

    Support boundaries for virtualized environments or server-based

  • Options for those who have printers that are no longer supported.

    With the release of Mountain Lion, various printers have lost support or features to 10.8.

    However, there are various third party options that can work for you!

    Here is a list of some options that you can try,

    HPIJS

    Gutenprint

    VueScan

    TWAIN is sane

    Printfab

    Even if these drivers are not officially supported by Apple or HP, they provide users with functional driver.

    The above drivers works for most of the old and new HP printers.

    Most of them have excellent support and can be easily installed by a power user.

    I hope that this help any that stuck in a situation of bad driver

  • How to remove services that are no longer used.

    Hi, I have a lot of services on my machine, 200 to be precise. Some are running, and some are in a stopped state. My machine starts at a reasonable speed, so it's not a problem. But after the start and after all the noise of caching calmed, I used up to 3.5 on 16 GB memory. I guess that a lot of this memory is consumed by unnecessary services running.

    So is it possible to remove some of these services without having to reformat my HARD drive? And with them cripples my vital 3rd party software?

    If you are referring to RAM and use only 3.5 GB on a total of 16 GB, you have nothing to fear.  You won't win any show by mucking around with services.

    What exactly do you hope to achieve?

    If you really want to disable some services - not to "remove" their - go here and then go to the page corresponding to your version of Windows--> http://www.blackviper.com/service-configurations/

    Before you do anything, however, read all the documents text at the top of any page reach you, including the Introduction, Notes for a computer more happy and user and the explanation of table header.  Read also How to install or uninstall services in Windows 7?

    The preceding two paragraphs and related material only relate to Windows services.  If you have services installed by 3rd party programs, let alone unless or until you uninstall these programs.

  • How to find files that are slowing down my computer

    I saw crazy files but I don't remember where I saw them.

    I saw crazy files but I don't remember where I saw them.

    Generally files, in itself, is not slowing down your computer.  Just to have files on your hard disk (because it is not completely filled) means very little - this is when things run / run they can cause problems.

    How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista

    http://support.Microsoft.com/kb/929135/en-us

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

  • When you get Windows message close, waiting for background programs nearby.

    Whenever I close windows I get the following message: waiting for background programs nearby. To close the program that is preventing windows from closing click Cancel and then close the program. Keys to choose East Force stop or cancel. This has happened for a while. I'm sure that all programs are closed before closing at 99.9%. Any ideas would be appreciated to help me ghet get rid of this message every time I close out. I have Windows 7 family ed. 64 bit and a HP Compaq Presario CQ60 laptop. Thank you, Jane

    Hi Jane,

    Thanks for posting in the Microsoft Community.

    You can create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

    Create a user profile.

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    Now search for the question.

    Follow the below link to fix the user profile damaged.

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

     

    If you need further assistance, please answer and we will be happy to help you.

     

  • How it is possible that I waited 32 086 minutes to try again my password and open my camera?

    I have a 64GB iPad but I lefted without battery for about 1 year, but when I loaded back on its shows that i must wait for min 32 086 my next essay on my password code.

    Forget your password

    iOS-forgotten password or a device is disabled after you have entered the wrong password

    I forgot the code of access for your iPhone, iPad or iPod touch, or your device is disabled - Apple Support

    iPhone, iPad, iPod touch: wrong results in red disabled screen access code

    Support forgotten password Restrictions

    iPad, iPod, iPod Touch Recovery Mode

    On Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

    You need to restore your device as New to remove a restriction password. Go through the normal process to restore your device, but when you see the options to restore like New or from a backup, do not forget to click New.

    You can restore from a backup if you have one on before you set the restriction password.

    If none of the work for you, then:

    Follow these steps to put your device in recovery mode iOS. If your iOS device is already in recovery mode, you can proceed immediately to step 6.

    1. disconnect the USB cable from the iPhone, iPad or iPod touch, but leave the

    other end of the cable connected to the USB port of your computer.

    2. turn the power off: press and hold the sleep/wake button for a few seconds button

    until the Red slider appears, then drag the slider. Wait until the device turns off.

    * If you can not turn off the device using the slider, press and hold

    Buttons sleep/wake and Home at the same time. When the device turns off,

    release the sleep/wake button and the home.

    3. While pressing and holding the Home button, reconnect the USB cable on the

    device. The device must light up. Note: If you see the battery charge warning,.

    leave the unit in charge for at least ten minutes to make sure that the battery has some

    charge and then start again at step 2.

    4. continue holding the Home button until you see the "Connect to iTunes" screen

    When this screen appears, you can release the home button:

    5. If necessary, open iTunes. You should see the following alert of "recovery mode":

    6. use iTunes to restore the device.

    If you do not see the "Connect to iTunes" screen, repeat these steps. If you see the "Connect to iTunes" screen, but the device does not appear in iTunes, see this article and its related links.

  • Table of DB tools list: how to access tables that are in the different SQL database?

    Hi all

    I work on an implementation of database (SQL server) and evaluates the Toolkit OR DB for this project.

    One of the requirements is that I need access to the tables that are in two different database

    (say Table to 1 DB and Table B to 2 DB).

    Our IT guy linked table in DB1 to DB 2 and I verfied this when I use the SQL server management studio.

    When DB 2 tables is filled, table from DB1 is also there. I can also do the same thing using MS Access.

    Table A of the DB1 is available for me enven if I only connect to 2 DB.

    Here comes the problem.

    When I use DB tool list Table.vi to access DB2, it does NOT list A table in DB1. It list only the tables in

    the database (DB2) which I am connection (using DB tool opened Connection.vi with a file DSN)

    So my work around right now is to open a separate connection both DB1 and DB2. However, this approach

    obviously creates a problem when I have to access a separate database constantly in my application.

    What would be a solution to this? I have search the Forum but only to see a post that is somewhat related to

    My question. (And it was published the 2004) Maybe I need to change the code in the orignial VI (DB tool list Table.vi)?

    My computer guy told me that he has not met this scenario since he wrote code in another environment such as

    VB and others and it has always been successful in linking the different database tables.

    I hope my question is clear and healthy because I don't really know much about database terminology.

    Any comment or suggestion is appreciated!

    Thank you

    Chad

    Ok.  Here is some information that I can work with.  Good.

    Your COMPUTER staff created a view called "VISUAL_WORK_ORDER".

    A view isn't a table.  It is a "virtual" table  Views are used to collect data (usually) in several different tables.

    But I guess that the code inside the DB tool list Table.vi returns a list of tables.  Views are not the tables.  Then "VISUAL_WORK_ORDER" does not appear in the list.

    HOWEVER, this should not really matter.  The view is here!  And it can be queried like any table.  So, you can use DB tools Select Data.VI... and wire in "VISUAL_WORK_ORDER" as the name of the table.  This will return the contents of the view.  Alto!

Maybe you are looking for