Hoy to convert an Ascii text file table

Similar Questions

• Convert data from text file to display for hex UDP transmission controls

  Hello

  I'm reading packets ethernet from a text file containing the actual hex data packets to then send these accurate return through a writing UDP hex data. I can't understand how to feed data into the function of writing UDP as real rather than characters ASCII hex data, as it does by default. I had the screen on the last VI before the writing of the UDP to "hexadecimal display mode" and if I manually type the hexadecimal values in the VI (hexadecimal string to binary String.vi - attached), then it passes the commands correctly. However,... when I fed the string of text in my text file data in this VI, it seems to be the substitution of this hexadecimal display on the VI input mode and the resulting entry in my UDP is still ASCII character mode. I tried to use a cast inside this VI, type... but that doesn't seem to work right. I have attached the main VI and VI which tries to prepare data before reading the UDP protocol. I've also attached an example of text file of data that I am an attempt of analysis.

  Any help would be appreciated,

  Thank you

  Hi jsrocket,

  the attached example should work as a transformation.

  Mike

• Batch convert pdf to text file in adobe pro xi?

  Anyone who is familiar with a method of batch conversion in Adobe Pro XI of PDF documents in accessible text files?

  Create a new Action, it adds a Save command and under the command settings, select 'Export files to alternative formats' and then 'text (Accessible)' in the drop-down list. Perform the Action on your files and you're done.

• Why is incorrect dt when TDMS log file is exported to ASCII text?

  In short, we are 6 hours recordings 4096 samples per second on 6 channels. We use a different program to analyze the electrical data and so we export to Ascii text. However, when import us the dt that is listed in the file Ascii text file won't and if I would like to convert it to the samples per second, it would be more than 4098.2! As synchronize us this data to another system, it is imperative that we ensure that the sampling time are correct. Anyone know why we would get an incorrect dt indicated in the ascii file?

  If I go back to the Module acquire DAQmx in Signal Express that we used to get the data, I see that the rate shown is 4096.0

  Clampfit of Axon INstruments allows us to import the data of Signal acquired Express.

  Potentially, we're looking at a few days or weeks to convert data because of this gap if anyone can shed some light on the view I would be very grateful.

  Kind regards

  SMB

  Take a look at the following documents, I think the first thing to check is that your card can achieve this sampling rate. If it is possible, then we can look into if it is for a reason, adjusting, or if something in the conversion is making data appear different.

  What sample rate is my DAQ able to map: http://digital.ni.com/public.nsf/allkb/4BBE1409700F6CE686256E9200652F6B

  How is the actual rate determined analysis: http://digital.ni.com/public.nsf/allkb/5782F1B396474BAF86256A1D00572D6E?OpenDocument

  Have you already been successful in this conversion to ASCII before?

  -will.i.am10

• Accessory JSP code for only text files

  Hi all
  I want to use the code in the file text on fire to open a text file and parse each line.
  
  I have a JSP page which I use to attach files. But the JSP attaches files to binary format and so the text file does not recognize these binaries.
  
  How can he do join text files or how to convert these binary text files?
  
  My text file code is: -.
  
  text file = TextFile();
  textFile.open(name: fileHolder.file_filename);
  
  logMessage ("- file exist? - >" + textFile.exists);
  
  {foreach (line textFile.lines)
  logMessage ("-The LINE is->" + line);
  
  
  
  }
  
  textFile.close ();
  
  And my JSP code is: -.
  
  < td > < input id = "attachmentFile" type = "file" < f: fieldName att = "fileHolder.file" / > value = "" class = "input" > < table > "

  There is a drawback to doing it this way (many things in memory), but unless the files are big, I suggest to try this:

  // build the string from the file just opened
  stringReadFromFile = String(binary : fileHolder.file, encoding : "ascii")
  

  Once you get it to a string, you might analyze it looking for '\n' line by line. Let me know if you need this code and I'm going to him as well.

  If the files are large, you can store the file in a temporary directory, and then reopen it using text file you described below.

  Dan

• Writing a single line of numbers in a text file or write several lines each iteration?

  Hello

  I am currently working on an application that has a few different time-loops at the same time. A single loop acquires data (DAQloop), another shows the data (raw and processed data) on graphs (Graphsloop) and another stores data in an open (Storageloop) ascii text file.

  The data is passed to the DAQloop to the Storageloop through a queue. Now, I leave the Storageloop take the first element of the queue (oldest) to store in the text file each iteration. However, I was wondering if it would be better to let the Storageloop take all items currently available in the queue store at once.

  Does anyone have ideas on this? Who better its? The text file is already open and is simply passed as a refnum.

  THX!

  With normal file primitives LabVIEW, you will get your best speed of disc when you write about 65 000 bytes of disk at once (or read, incidentally).  When I write a similar code, I included a string buffer in the loop of Scripture.  Whenever I get data to write, I add it to the chain.  When the chain hits 65 000 bytes, I write to disk.  You could break this into three loops, as well - a read buffer, and write.  Depending on the current size of piece, you could see a change in the order of magnitude of the speed of disk write.  This write operation is often limited by the conversion from binary to ASCII, not the disk i/o.  If you do this, be careful with your buffer.  You can get some serious slowdowns depending on how you implement it.  This post has some details and examples.

• Convert a JPEG text to a form that I can change and then print.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: how to convert a JPEG text file to the one in which I can change and then print?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  This can be done better with Adobe Photoshop CS5 http://www.adobe.com/products/photoshop/compare/ which is about the gold standard for working with documents of the image - but it's a bit expensive.  It also won't be easy even with this program - it is possible but it will take time and effort.

  If you do not Photoshop, you can use the tool text box in Microsoft Word or picture in Microsoft Publisher - even if they are quite a bit more difficult to work with Photoshop (which is hard) and the results will not look as good, regardless of how carefully you use. The advantage of Word on the editor, is that you have the possibility to use a Wordart object and 3D text. So these are the vector graphics as opposed to a bitmap will not appear on your final print rasterized (but this isn't a problem with Photoshop)

  Quality is really about how much the text superimposed on the image - if it is separate, it will be much easier than if it is covering the picture (so the question is how to fix the image once the text is deleted or changed and not only to change the text).  And it may not be a simple matter to simply correct a word or two, if you do not have the same font available - you may need to change the entire text, so it will look right.

  Another solution is to use OCR software to scan the image, and then try to modify the text.  Still, it won't be easy (probably even harder than the options above) but it's a possibility (depending on how the text is mixed with the image).  The problem here is that most of the options just freeware have the ability to make such a complex task, so you would probably need a comprehensive program of recommended.  Here are some options:http://www.simpleocr.com/OCR_Software_Guide.asp.  What you should do the work is also quite expensive and if you choose this option or the above options depends on what other uses you may have for these programs (and the quality you're looking for in the finished product), once again, I don't think something will do the job as well as Photoshop - I have Photoshop (an earlier version) and I never tried to do it before I did a bunch of other things that would seem impossible.  I don't want to attempt this task if the text superimpose the image, because although I think it would be possible, it would take a LOT of time and effort to obtain a finished product of acceptable quality.

  Technically, you could use Microsoft Paint to do this, but the quality would probably (which are certainly) be terrible and I doubt you want to even keep yourself let alone print it or send it to someone else.  In some cases, it might do the trick but it's free (again, depending on where to find the text and especially if she superimposes the image).

  Regarding the conversion of the JPG file, I'm not sure what turn you to who would make it easier to change and change as you suggest here.  Perhaps TIFF, but it helps very much.  Here are some converters of JPG files:http://convert-jpg.software.informer.com/.  Even if you converted to a .doc file, you could just open it and change the text - it is not as simple as that.

  Another option would be to convert the JPG file in a file of CAD and CAD software allows you to edit the image - but I'm not familiar with CAD products so I can't offer recommendations here (except that I heard that most working properly are still more expensive than the above options and they can be used just about everything).

  Whatever you decide to do, it won't be easy (and perhaps costly as well).  There are freeware programs that claim to be able to do these things, but you will not be disappointed by the quality (unless the text is separated from the image, you can totally erase what's there and replace it with the one you want).  For them, you can search on Bing, Google,www.tucows.comand www.download.com.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Insert text file as layer

  Hi all

  I'm looking for a way to convert each word in a text file in an image, I'll be able to do in PS? What I think is to import a text file, PS can locate the spaces between words and automatically cut each word in a layer, then I can easily export in each image. Anyone know how I can do? Thank you!

  Thank you. I think I just understand how do. 1st, I converted my CSV text file, then I created a text layer as "Variable" in the PS, load the CSV file as a set of data for the text layer. Finally, use the 'export-> sets of data in the form of files', I can take all the words in the CSV file and export one by one in the personal file. Everything is done in 10 minutes! Can't believe that I didn't 'Variables' after using the PS for more than a decade...

• How to convert a text file and give the table

  Hai
  
  How to convert a text file and give the data of the table

  ISN'T THERE!

  You must put this

  SET_BLOCK_PROPERTY ('TEST_MS', insert_allowed, property_false);
  SET_BLOCK_PROPERTY ('TEST_MS', update_allowed, property_false);

  just before the last exception...

  Published by: Dora on January 19, 2010 14:54

• Print table with decimal places in text file

  Hello

  I tried to find this information on the forums, but I can't seem to find exactly what I'm looking for. I VI that when it's finished has a 2 column and row table 5 or more which is filled with thermal loads and corresponding tensions. I want to print this table to a text file, but I want to understand decimals in at least the tension. I've attached what I have, thanks in advance

  The answer is on your pc. If you have the open Help context, click the detailed help. There is a link here on the format specifiers. You use %d which tells the function to convert whole numbers. You want %f for floating point numbers.

• need to convert a logically binary text file

  Hello

  I have a text file binary that I have read and converted into a two dimensions array using the spreadsheet in table string. Then I converted the 2D table to table 1 d by concatenating columns. now I want to convert this table logically to another array of the same size such that all 0 are replaced by-5 and all the 1 replaced by + 5.  Thank you.

  Kind regards

  Raja

  Hi Raja,

  You can go through a loop and replace all values of your, or you use the function 'Flatten channel' and replace your values with the function "search and replace a String." Convert the string to your table with the function "Unflatten chain.

  Mike

• text file convert array of strings

  I tried to convert the text into an array of strings. But this is not successful.

  text file:

  SD, 1,2,3,4

  GD, 3,4,5,6

  I use the string of worksheet to the Array function, but all THE characters became zero.

  my result:

  0,1,2,3,4

  0,3,4,5,6

  Hi Hieu,

  try this way:

  

  When you want an array of strings that you will need to provide the constant corresponding to the lower left entry of the "chain of worksheet to the table..."

• Convert text file to the recordset

  We have a web server where the text files are downloaded by the outside world, and I need to get the data in these files into my SQL tables.  I can code ColdFusion to convert text files (which are on the same server as web pages) to the recordset so I can have a SQL stored procedure to import data from my SQL tables?

  YES...

  I hope that you are asking here for someone to do it for you, but I want to clarify that the two tags, you will probably want to look at are the tag which allows you to read and analyze some sort of that you care.  And the tag, which may be able to parse the file into a recordset automatically, if it is well structured.

• How can I convert a page typed into an editable text file

  How can I convert a page typed in an edible text file? I have a 50 page typed (on a typewriter ;-) document I want to convert (scan?) in a format so that I can then open the file in a text editing application (Word?) and edit.

  How is the most effective (and least expensive) way to do it?

  Thank you

  HAL

  < re-titled by host >

  "Edible text file?" You hear as he print on rice paper, so you can serve it up like at dinner side dish? You want someone to eat their words

  I think that the last two multifunction printers, I bought came with some kind of OCR characters (OCR) software as part of the sweeping package.  I guess that's not the greatest.

• AppleScript - extraire extract values from a table, create a text file with these values

  Hello world

  Lets say I have a table that looks a bit like this

  

  And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these

  

  

  Is it still possible?

  I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.

  There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.

  Y at - it script-genius out there?

  See you soon

  Florian

  Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor.  The files will appear on the desktop

  say application "Numbers".

  say front document to tell the worksheet active

  say ( class is worn) fromfirst table whose selection range

  selectionRange defined in column 1 of the selection

  set cnt to 0

  the value destRange for range

  the value currentList to {}

  -the list of switches

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then

  switch and the value in the currentList currentList

  end if

  NTC put to the cnt + 1

  end Repeat

  -Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".

  Repeat with aswitch in currentList

  " game textOut to '# Script generated with Applescript for switch' & aswitch &"

  # on "& (today's date) &"

  !

  conf t

  "

  set cnt to 0

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  -Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".

  if (aswitch contains the switch) then

  the value cellCol to address a column of first cell of acellule

  address of line of first cell value cellRow in of acellule

  value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer

  the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer

  the value desc to the (value of the cell cellRow of column (cellCol + 3))

  " put to textOut textOut &.

  !

  "" IG 1/0 interface / "& aport &.

  switchport mode access

  switchport access vlan "" & vlan & ""

  Description LINK TO "" & desc & ""

  "

  on the other

  -Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".

  end if

  NTC put to the cnt + 1

  end Repeat

  Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission

  textOut write to myFile

  MyFile close access

  end Repeat

  end say

  end say

  end say