HP 10 more 2201 compressed: HP 10 more Questions

Similar Questions

• (Redirected) doing a full install windows 7 pro sp1 64-bit on my dell optiplex 760 Tower, but even though I have the original disc from dell, I have more questions...

  try to do a full install on my dell optiplex 760 Tower, but even though I have the original disc from dell, I have more questions...  I get all the features and everything all the way to the last step and everything, but then I think it will be a success, it doesn't say windows startup and let me down in me leaving with a blue screen no signal on my LCD 15 '... If someone would have an idea and would be kind enough and generous to help me as a fellow geek... I mean built my first computer, lived the whole 9 yards, but still cannot understand or resolve this situation... I would greatly appreciate any help of knowledge all my colleagues people could give... .i currently do not have a phone, but is will can always happen to me by message on his or [NOTE from the Admin: Email deleted in accordance with the TOU strategy identification], thank you for your time and also gratitude.

  Best of this post in the Forum OS from Microsoft here:

  http://en.community.Dell.com/support-forums/software-OS/f/3524.aspx

  Bev.

• I applied the new OS update (1.3.1) but which only added more questions than I noticed (so far):

  I applied the new OS update (1.3.1) but which only added more questions than I noticed (so far):

  1 - the emails in my POP account that are deleted on my computer still appear in the Inbox of my pre until I delete them manually.

  2 - If you use my headphones, the ringtone is always routed through the main pregnant when someone calls - can be annoying!

  More to follow, I'm sure.

  I have the same problem.  I deleted previous messages from my list of conversions, and now the phone won't show new conversations with the same people that were started fresh.  I also noticed that when a person to send a message, the messages are appearing.  It is a mess!

• More questions

  OK, I need to make a few buttons inside a loop... Here's my attempt... nl is a NodeList, populated by another function.

  int length = nl.getLength ();
  ButtonField [] buttons;
  [FieldChangeListener] listen;
  for (int a = 1;<= length;="">
  {
  Rtf1 RichTextField = new RichTextField();

  RichTextField rtf2 = new RichTextField();
  Pr = nl.item (a) (element) element;
  Rtf1.SetText (PR. GetAttribute ("Author"));
  String prev = pr.getAttribute ('preview');
  PREV. Substring (0.45).
  PREV = prev + «...» » ;
  RTF2. SetText (PREV);
  Add (Rtf1);
  Add (RTF2);
                     
  keys [a] = new ButtonField("More...");
                     
  Listen [a] = new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context)
  {
  UiApplication.getUiApplication () .pushScreen (new ChattyScreen (pr.getAttribute ("id")));
  }
  };
                     
  keys [a]. SetChangeListener ([a] listen);
                     
  Add (new SeparatorField());

  }

  and here are the errors I get...

  C:\Program Files (x 86) \Research In Motion\BlackBerry JDE 4.5.0\bin\rapc.exe-silencieux import =...... \lib\net_rim_api.jar code name = ShackChatty ShackChatty.rapc warnkey = 0 x 52424200; 0 x 52525400; 0 x 52435200 "C:\Program Files (x 86) \Research in Motion\BlackBerry JDE 4.5.0\bin\lcjava\Chatty.java" "C:\Program Files (x 86) \Research in Motion\BlackBerry JDE 4.5.0\bin\lcjava\ChattyScreen.java".
  C:\Program Files (x 86) \Research In Motion\BlackBerry JDE 4.5.0\bin\lcjava\ChattyScreen.java:62: local variable pr is accessible from the internal class; must be declared final
  UiApplication.getUiApplication () .pushScreen (new ChattyScreen (pr.getAttribute ("id")));
  ^
  C:\Program Files (x 86) \Research In Motion\BlackBerry JDE 4.5.0\bin\lcjava\ChattyScreen.java:66: cannot find symbol
  symbol: method SetChangeListener (net.rim.device.api.ui.FieldChangeListener)
  location: net.rim.device.api.ui.component.ButtonField of the class
  keys [a]. SetChangeListener ([a] listen);
  ^
  2 errors
  Error! : error: failed java compiler: javac - 1.3 source-target 1.1 - g - O-d C:\Users\Brayton\AppData\Local\Temp\rapc_1a01b507.dir - bootc...
  Error while building project

  Ty for any help you can give.

  As you are a beginner please visit this link:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=13264&jump=true

  There is useful information for you

• AnyConnect VPN Mobile disabled 5505 SEC no more questions

  Hi all

  I have a 5505-SEC-BUN-K9, must purchase a license of Mobile Anyconnect vpn.

  For the question now, I was able to active the anyconnect for mobile but the sec as well as features all failed. How can I check the question?

  The devices allowed for this platform:
  The maximum physical Interfaces: 8 perpetual
  VLAN: 20 unrestricted DMZ
  Double ISP: Activated perpetual
  VLAN Trunk Ports: 8 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active / standby perpetual
  Encryption - A: enabled perpetual
  AES-3DES-Encryption: activated perpetual
  AnyConnect Premium peers: 2 perpetual
  AnyConnect Essentials: 25 perpetual
  Counterparts in other VPNS: 25 perpetual
  Total VPN counterparts: 25 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: 76 days allowed
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy UC phone sessions: 2 perpetual
  Proxy total UC sessions: 2 perpetual
  Botnet traffic filter: disabled perpetual
  Intercompany Media Engine: Disabled perpetual
  Cluster: Disabled perpetual
   
  Internal guests: 10
  Failover: disabled
  Encryption - A: enabled
  Encryption-3DES-AES: enabled
  Security contexts: by default
  GTP/GPRS: disabled
  Premium AnyConnect peers: by default
  Other VPN peers: by default
  Assessment of Advanced endpoint: disabled
  AnyConnect for Mobile: enabled
  AnyConnect Cisco VPN phone: disabled
  Shared license Premium AnyConnect server: disabled
  Sharing license: disabled
  Proxy sessions for the UC phone: by default
  Total number of Sessions of Proxy UC: default
  AnyConnect Essentials: enabled
  Botnet traffic filter: disabled
  Intercompany media engine: disabled
  Cluster license: disabled

  Have you tried to re-apply your activation key for the license of security more?

  If you don't have it available, you may need to open a TAC case to get worldwide license team to regenerate it for you.

• isn't 90% more questions from the actual training?

  Several years ago I had an instructor (Chinese leader) who was in charge of the certification test,

  and she said that most of the test questions is from dishes of course.

  It allows to actually take the course.

  Many Oracle certification tests (not all) have one or more Oracle University courses that match very closely the subjects that will be tested.  In these cases, the course of the ORGANIZATIONAL unit is a great way to prepare for the exam.  There is certainly no fixed percentage (90% or other) of the exam questions which can respond by using the material presented in the course.

  For tests where these exam-course correlations exist, I think that there is at least some degree of direct liaison between the two.  OR developing tutorials and reviews - people doing this development perhaps in some cases.  Even if developers review certainly not access o material of course and probably vice versa.

• More questions about registration of the plugin on a Production Server package

  I tried to review other messages (as well as the documentation for VMware) regarding the plugins installation/registration on [the customer] production servers.  Specifically, I was looking at this recent announcement:

  https://communities.VMware.com/message/2292717

  The following response was a very good point, but I was looking for a little more in detail about how other developers are doing this installation/registration:

  laurentsd: as a plugin developer, you are responsible to write an installer that customers will run to register your plugin package. You do not want to treat to run a java program directly :-)  The installation program should be easy to use.

  I was curious to know how many people have their customers to install a Web Client plugin.

  The States of doc SDK - Tutorial.html in the 'record of your plugin...» "article for the mode of production (step 1), you can:"

  Use a script program or installer to create the object of Extension data programmatically and enter this data object using the ExtensionManager.registerExtension method

  This means that the .zip file must be placed on a server access with HTTPS access.

  [Variant 1]: are most of the people having the client stores the .zip file in a HTTPS server in the customer environment?  If Yes, then I guess that the installer prompts the user to specify the URL to the zip file, which is then rolled into the Extension data' things "programmatically.

  [Variant 2]: or, most people hold their own on their own server HTTPS .zip file by using an installation program with hard coded URL value in the .zip file, and having the user simply launch the installer without entering any additional data?

  Or maybe there is an Option of [3] that I have not yet thought?

  It seems that [option2] is obviously easier for the customer, but makes it harder to make a plugin that everyone has access to.  [Variant 1] requires a bit of work for the customer, but allows the developer to restrict access to the plugin for customers who have paid for the product.  Certainly the installer can block based on the license key, but anyone with some knowledge of vSphere Client Web plugins as well as documentation 'Save your plugin package' could take a plugin .zip file and install it manually without an official Installer (when the .zip is hosted to the public).

  You must take the URL of the ZIP file as an input for your script so that all options can be supported. If the zip file is hosted in the customer environment, then the URL should point to that. If you host the zip file on your own server, then the URL should point to your server.

  You should code hard not URL that you have mentioned in the #2 option, because there are several companies and agencies Government which do not allow to connect outside of their network.

• SQL * more question: unprinted despite SET ECHO ON command

  RDBMS Version: 11.2.0.4

  OS: Oracle Linux 6.4 (bash shell)

  I'm kinda a newbie to SQL * more.

  Here's a SQL * Plus script embedded in bash script that scales multiple data files. This script has been run on the DB server side.

  #! / bin/bash

  export ORACLE_SID = ORCL1

  echo "resize Datafile began to" 'date '.

  sqlplus "/ as sysdba" < < EOF

  set echo on

  Set of feedback on

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.338.834340223' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.337.834340223' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.336.834340225' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.335.834340225' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.334.834340225' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.333.834340225' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.332.834340227' resize 25g;

  quit smoking

  EXPRESSIONS OF FOLKLORE

  echo "resize Datafile ended in" 'date '.

  As you can see, the SQL * more script contains ON SET ECHO ON and PUT your COMMENTS.

  But in the logfile (see below), I don't see every ALTER DATABASE DATAFILE... command printing. I see that ' altered database.'  printing messages.

  I executed the script to nohup as

  nohup resize.sh > MyResize2.log &

  $ cat MyResize2.log

  DataFile resize started at Sun Dec 29 00:09:45 MYT 2013

  SQL * more: Production of the 11.2.0.4.0 on Sun Dec 29 00:09:45 version 2013

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  With partitioning, Real Application Clusters, Automatic Storage Management, OLAP,.

  Options of Data Mining and Real Application Testing

  SQL > SQL > SQL > SQL > SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  Hello

  ECHO applies only to the SQL commands * Plus reads through the @ or the STARTUP command, no statements you type directly in the SQL > prompt or read the bash script statements.

  Try to create a separate file, containing only the command ALTER DATABASE in a separate file (let's call it alter_database.sql for now) and call it from your script bash, like this:

  #! / bin/bash

  export ORACLE_SID = ORCL1

  echo "resize Datafile began to" 'date '.

  sqlplus "/ as sysdba".<>

  set echo on

  Set of feedback on

  @whatever/alter_database

  quit smoking

  EXPRESSIONS OF FOLKLORE

  echo "resize Datafile ended in" 'date '.

• More question of 2 TB LUN.

  Currently I have a NetApp FAS2040A connected through HBA. I created the LUN 8TB on the device and introduced him to ESXi, but the ESXi has a limit on the VMFS 2 TB. I need to present a LUN to VM 8TB runs a Win 2008 R2. What is the best way to do it without losing too much performance and risk data loss. Some of the ideas of mine are as follows:

  (1) create a LUN VMFS TB of 4 x 2 and use the dynamic disk in Windows to create a partition of 8 TB

  (2) 2 TB LUN to create and use extensions ESXi to bring this volume to 8TB

  (3) a licence to CIFS and create the 8TB on the device

  I'm new to the ESXi fearly please bare with me. I'm looking for the best suggestions or the ups and downs on the above scenarios.

  Thank you for your help.

  Even if you create a store of data from more than 2 TB virtual disks are always limited to 2 TB.  If you need to present 8TB to the VM, then your best option would be to configure the computer virtual to connect directly to the 8TB LUN using the MS iSCSI initiator software.

• More question of the duration of the video/Audio output

  NOTE: (Sync = Sync, however spelt).

  Hello

  I had a problem with almost all Blu - ray discs in yet that I've only just noticed (my friend at work identified for me). If I say a disc with 4 videos of each to 20mins each (just for example), it seems at least video tracks suffer from this problem as listed below:

  The problem:

  The video and audio are out of sync over another, or so it appears on the surface, after looking for a solution to this problem myself or generally to research what was going on, I noticed tracks begin as usual but that I tested it myself (as the worst for bugs ironically) appeared what was going on. The video track, I checked was around 25mins (and x number of seconds) just by browsing the disc but I noticed the stream BD was a time of 32minutes game, clearly 7minutes longer than the original source file, then why is it? Well, after an hour or 2 of re - look at the content, I noticed this video track sometimes looping backwards (just one time) in seconds, so when playing for example, video and audio popular lets say 03:57 play time and then the video will be back jump for example 03:46 while the audio continues to play in what should be normal. Even then seems to keep the entire video so the tracks are not overwrite the original but in addition to the track that extends the length of the video.

  That has not been explained probably well so in short, the video seems to go back a few seconds during playback (when the product) while the audio continues on normally, not only put the tracks out of sync and extend the video length of 25mins to 32.

  Apparently this has been consistent in just about every disc I've done, it is common only in one of the video tracks although some what happened to it most.

  The job well files source before entering again, I usually have them in mp4 because I have always worked with mp4 to work and it is easier for this kind of stuff (for me personally), they have the same parameter coded before entering again and then in again. The source of the videos play fine before never be affected by the recall and have no problem.

  Seems to be something happening on the output Ecore.

  Any idea what could be the cause? Although I doubt it has much to do with the encoding in all encoding settings are by default (if I remember correctly).

  I have practically lost over 30 discs BD on it now without realizing and could be much more if I had not noticed, could really do with help here as im stuck in what could cause video to not only jumpback once track from time to time but create 7mins extra video length making of the thought.

  This could be a problem of variable capture frame rate. First like either variable frame rates. Good luck.

• Configure SQL * more question

  People,
  
  Hello. My operating system is Oracle Linux 5. Database is DB Oracle 11 GR 1 material.
  
  I tried to configure SQL * Plus in the following way:
  
  My directory: / home/myOracle/OracleDB_Home/bin
  
  SYSTEM_PASS = SYSTEM/SYSTEM
  export SYSTEM_PASS
  . / sqlplus SYSTEM/SYSTEM
  
  But this message appears:
  
  Error Initializing SQL 6 * more
  Sql < lang > .msb file not found message
  SP2-0750: you may need to set ORACLE_HOME in your Oracle software directory.
  
  Where the message sql < lang > .msb file? What is Oracle software directory?
  Any folk can help solve this problem?

  user8860348 wrote:
  Folk,

  Hello. Thanks much for the reply.

  What is Oracle software directory?
  How to set ORACLE_HOME directory of Oracle software?

  Hello

  run

  $ > export ORACLE_HOME = / home/myOracle/OracleDB_Home

  See you soon

• More question of banding

  I would like to know how to create tapes instead of getting rid of it.   I know that everyone wants to get rid of banding, but I want to exaggerate or make the strips that did not exist.

  You may think it's crazy - but think how now adays people want to add artifacts digital disortion, bad old tv glictches and burning rolls of film, dust and scratches.  In a few years, when we use more 8 bit, bands will be a former "cool" effect of aspect

  Thanks in advance

  On a Mac using CS5.5

  Use of the effect of Posterization in the aesthetic category combined with some difficult adjustments using the levels and curves before and after the posterize... Alos consider Colorama for some of this stuff...

  Mylenium

• More Question

  Hello, a couple of days, I bought PS Elements 8 download. Today, I talked myself into the upgrade to 8 items PS Plus and gave them $49.00, assuming that the software would change. As of now, it doesn't seem like there is a change, but I noticed that online storage has increased from 2 gig of 20 gig. In my account manager, I see the download for 8 items, but no to plu product download. I guess my question would be of fact I have buy more or just extend my storage space? If there is more that how to make the benefit more? Is this something that comes more servers or what. I'm sorry if I'm misinformed, but it's really not clear what I bought. Thank you in advance if someone could clear up this place for me before I spend hours trying to figure that I don't know the software well enough to notice a potential change.

  , but I noticed that online storage has increased from 2 gig of 20 gig

  It's really what you should see, however, and the fact that you can now download the things added in the content panel that has Gold banners above, so I don't know what else you think that you are missing?

• SQL MORE QUESTIONS

  According to the tables and the attributes below, I need solve 25 questions. I answered some of them and some of them I couldn't solve. I need your help please.
  
  School (sch_name, sch_phone, sch_code, sch_dean)
  Advisor (adv_code, adv_fname, adv_lname, adv_phone, sch_code)
  Major (maj_code, maj_desc, sch_code)
  maj_adv (maj_code, adv_code)
  student (std_code, std_lname, std_fname, std_gend, maj_code, std_dob)
  rank (std_code, gr_lname, gr_fname, gr_t1, gr_t2, gr_hw, gr_pr)
  
  
  create table school
  (sch_code varchar2 (8) school_sch_code_pk primary key constraint,)
  sch_name varchar2 (50).
  sch_phone varchar2 (12),
  sch_dean varchar2 (20));
  
  insert into the values of the school ('BUS', "School of Business", 281-283-3100', 'Ted Cummings');
  insert into the values of the school ("EDU", «School of Education», 281-283-3600', "Dennis Spuck");
  insert into the values of the school ("MSM", "School letters" and Human Sciences, ' 281-283-3333', "Bruce Palmer");
  insert into the values of the school ('DRY', 'school of Science and engineering', ' 281-283-3700', "Sadegh Davari");
  
  create table Advisor
  (adv_code varchar2 (08) advisor_adv_code_pk primary key constraint,)
  adv_lname varchar2 (15).
  adv_fname varchar2 (15).
  adv_phone varchar2 (12),
  sch_code varchar2 (8) constraint advisor_sch_code_fk references school (sch_code));
  
  insert into portfolioadvisor ('A1', 'Porter', 'Mattie', ' 281-283-3163', 'BUS');
  insert into portfolioadvisor ("A2", "Grady", "Lost", 281-283-3400', 'BUS');
  insert into portfolioadvisor ("A3", "Tran", "Van", 281-283-3203', 'BUS');
  insert into portfolioadvisor ('A4', 'Sale', 'Nili', 281-283-3202', 'BUS');
  insert into portfolioadvisor ("A5", "Kwok-good', 'Yue', 281-283-3864', 'SEC');
  insert into portfolioadvisor ("A6", "Jones", "Lisa", ' 281-283-3551', "EDU");
  insert into portfolioadvisor ("A7", "Palmer", "Bruce", 281-283-3445', "MSM");
  
  
  create major table
  (maj_code varchar2 (10) major_maj_code_pk primary key constraint,)
  maj_desc varchar2 (30),
  sch_code varchar2 (8) constraint major_sch_code_fk references school (sch_code));
  
  insert into large values ('ACCT', 'Accounting', 'BUS');
  insert into the great values ('Ministers', 'Finance', 'BUS');
  insert into large values ("ISAM", 'Management Information systems', 'BUS');
  insert into large values ('SMK', 'Computer Science', 'DRY');
  insert into large values ('HIST', 'History', "MSM");
  insert into large values ("INST", "Instructional Technology", "EDU");
  
  create the table maj_adv
  (maj_code varchar2 (10) constraint maj_adv_maj_code_fk main references (maj_code),)
  adv_code varchar2 (08) constraint maj_adv_adv_code_fk references Advisor (adv_code).
  constraint maj_adv_maj_code_adv_code_cpk primary key (maj_code, adv_code));
  
  insert into maj_adv values ('ACCT', 'A1');
  insert into maj_adv values ("ACCT", "A2");
  insert into maj_adv values ("Ministers", "A2");
  insert into maj_adv values ("ISAM", "A3");
  insert into maj_adv values ("ISAM", "A4");
  insert into maj_adv values ("CSCI", "A5");
  insert into maj_adv values ("INST", "A6");
  insert into maj_adv values ("HIST", "A7");
  
  
  create table students
  (std_code, varchar2 (9))
  std_lname varchar2 (15) constraint student_std_lname_nn not null,
  std_fname varchar2 (15) constraint student_std_fname_nn not null,
  std_gend varchar2 (8).
  maj_code varchar2 (10) constraint student_maj_code1_fk main references (maj_code).
  date of std_dob,
  constraint student_std_code_pk primary key (std_code));
  
  insert into student values ('S1', 'Jordan', 'Michael', 'F' 'Ministers', to_date (10 March 1962 ',' Mon-DD-YYYY ""));
  insert into student values ('S2', 'Barkley', 'Charles, m', null, to_date ('12-Sept-1964, ' Mon-DD-YYYY ""));
  insert into student values ('S3 ', 'Johnson', 'Magic', am ', 'ACCT', to_date ('13-Sep-1960, ' Mon-DD-YYYY ""));
  insert into values student ("S4", "Williams', 'Serena', 'F', 'ISAM', to_date (October 23, 1980 ',' Mon-DD-YYYY" "));
  insert into student values ('S5', 'Duncan', 'Tim', am', 'ISAM', to_date (August 7, 1972 ',' Mon-DD-YYYY'));
  insert into values student ("S6", "Graff", 'Steffi', 'F', 'SMK', to_date (30 April 1962 ',' Mon-DD-YYYY ""));
  insert into values student ("S7", "Navratilova", "Martina", 'F', 'ACCT', to_date (18 December 1972 ',' Mon-DD-YYYY ""));
  
  NOTE Insert student (std_lname, std_fname, std_code, std_dob)
  NOTE values ('S2', 'Barkley', 'Charles', to_date('12-Sep-1964','DD-Mon-YYYY'));
  
  create the table class
  (std_code varchar2 (9) grade_std_code_pk primary key constraint)
  constraint grade_std_code_fk references student (std_code).
  gr_lname varchar2 (15) constraint grade_gr_lname_nn not null,
  gr_fname varchar2 (15) constraint grade_gr_fname_nn not null,
  gr_t1 number (5), constraint grade_gr_t1_cc check (gr_t1 between 0 and 100).
  gr_t2 number (5),
  gr_hw number (5),
  gr_pr number (5));
  
  insert into rank values ('S1', 'Jordan', 'Michael', 90, 80, 98, 90);
  insert into rank values ('S2', 'Barkley', 'Charles', 60, 100, 100, 60);
  insert into rank values ('S3', 'Johnson', 'Magic', 88, 98, 96, 98);
  insert into rank values ("S4", "Williams", "Serena", 92, 92, 92, 92);
  insert into rank values ('S5', 'Duncan', 'Tim', 90, 94, 94, 96);
  insert into rank values ("S6", "Graffiti", "Steffi", 80, 83, 84, 72);
  insert into category values ("S7", "Navratilova", "Martina", 91, 88, 94, 95);
  
  the questions are:
  
  Give the following commands:
  
  1 the names of students who do not have a large.
  2 display the names of the students whose name has two "o" inside.
  3 the names of the students whose first name has an "e" in it.
  4 the names of the students whose name has exactly five characters in there.
  5 the names of students with higher test grade 2 test 1 grade.
  6 the names of pupils with grade of the project between trials 1 and 2 test classes.
  7. give the name of the student whose name begins with the character 'B' or who have never transformed into working from home.
  8. give the command that will appear two columns and one record. The first column will have the title "Major" and "ACCT" as value. The second column will have the title of 'MIS_Count' and will display the number of advisors of accounting.
  9 display the name of the student whose test 1 score is higher than the average on test 1.
  10. give the names and surname of the students who scored above average on test 1, as well as above average on the test # 2.
  11 show the date variable system using the double table.
  12. show the date variable system using the table of quality ensuring that the date is displayed only once.
  13. give the name of the student who is the oldest student and scored highest on the first try.
  14 list different majors and number of advisors for these majors.
  15 show the names of students who do not quality for any element.
  16 show the names of students who do not have at least one element.
  17 the names of students who have the same major as 'Michael Jordan'.
  18. give the names of the students whose average on test 1 and test 2 is higher than the average on the homework and project.
  19 display name and the average of the test 1 and 2 test for each student.
  20 display the number of students in the student table using three different methods.
  21. view student numbers in the table of student accountants.
  22 display the number of students of accounting and finance in the student table.
  23 show the average on the test 1 and 2 test for female students.
  24 show the number of students of accounting and finance including test 1 grades are above average on test 1.
  25 display the name of the major that has more than two students.
  
  I'm stuck with the following questions (1,12,13, 15,16,17,24) and the rest, I finished them but I'm not sure.
  Thank you and looking forward to hear your suggestions.

  Hi and welcome to the forum!

  This looks like a duty for me to be perfectly honest. When it's people are usually not willing to spoon feed answers because is not helping improve learning.

  I'll try to help if you can show me what you have tried for the issues that you are having problems with.

  Thank you!

• Current state of the iPhone folded 6 more question

  Hi all.  I'm definitely someone Android, but my two sons are big fans of Apple.  My youngest son who just turned 11 years old has an iPhone 6 Plus.  For a boy his age, he deals with amazing care.

  It has become recently folded, which often causes a white band at the top of the screen and there is a noticeable shift from the hole for the sim card.  How the elbow he got a mystery.

  I did my research, which seems to suggest that it is the result of a design flaw, but that's a guess on my part. Her phone is out of warranty, and as far as I can tell, his only real option Apple is a $329 out of warranty replacement.

  I realize that the people who devote their time and information here do not speak for Apple, but I thought that the perhaps some might have had a recent experience with Apple about it.  It would be useful if someone could give me an idea of their understanding of how Apple takes care of this for phones that are out of warranty.  I don't know if it makes sense to go to the Apple store and see what they will do or if it is a problem with a clear answer.

  I also found devices that supposedly will fix the problem and I have seen some videos of supposed solutions.  If anyone has some tips on the State of the art regarding this topic, I'd appreciate any help.

  Thanks in advance for any help.  On occasion, I sought help here in the past, and I've always been impressed that so many people volunteer their help to people like me who would be lost without it.

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation to establish your repair options available via Apple, including the time and cost.

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/