HP 1022: my HP 1022 was working fine all of a sudden I get a message "your printer is not connected" HELP

Similar Questions

• Photoshop elements editor 14 was working fine, all of a sudden it does not, even if I turn off my mac.  Why?

  Photoshop elements editor 14 was working fine, all of a sudden it does not, even if I turn off my mac.  Why?

  Today I got the help of Adobe's Support team, and it was excellent.  Everything works perfectly now.   Thanks, John for trying to help anyway.

  CONCERNING

• Printer was working fine, a lack of ink, he succeeded. Now the printer does not print.

  Printer was fine, a lack of ink, replaced ink, now the does not print from the computer.  It will print a test page for the printer.  He do not print on the computer.  Thanks for your help.  Max

  Hello

  You must check with assumption of the manufacturer of the printer, the online documentation and drivers and ask to
  their forums (if any) on the known issues.

  Not really a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• my computer was working fine - all of a sudden had this error blue screen message oxoooooo7b and now it will not boot even in safe mode

  can not restart even in safe mode

  Hi Michael H. Wolf,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the articles below and check if it helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

• HP psc2100 series all-in-one: printer was working fine, all of a sudden its impasse on copy and will not be printed said export error

  computer printing problem saying "Error exporting" and printer saying just 1 copy.  I tried troubleshooting on mine, doesn't have the verified maintenance on the printer, but still saying error. Help, please!

  Hi @kelley22,

  Welcome to the HP Forums!

  I see that your HP PSC 2100 printer is stuck on copy and will not be printed on Windows 8. I'm happy to help you!

  The first step, I would like to recommend is a hard reset. Please see this message, How to perform a hard reset, by @Rich1. It is very important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. See this article, questions when it is connected to an uninterruptible power supply/Strip/surge protector power, for more information. This is true for printers and ink jet.

  Once this step is finished, please try to print a self-test report, to check the printer hardware is fully functional.

  To print a self-test report, follow these steps:

  • On the product control panel, press Setup.
    The installation menu appears.
  • Press the right arrow ( ) until print report displays and then press OK. The menu print report appears.
  • Press the right arrow ( ) until the self-assessment report and press OK. The self-test report prints.

  If the test report print, then on the computer, please try our HP print and Scan Doctorand let me know what happens!

  Hope this helps and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• I can't get my drive (d :)) to recognize a CD or a DVD. It was working perfectly, all of a sudden, nothing happens when I put a disc in.

  I was able to burn DVDs & CDs for years on this computer, and then all of a sudden, nothing happens when I insert a disc.

  Help!

  Hello

  · What is the number and the model of the computer?

  · Were there any changes made on the computer before the show?

  You can follow the steps from the link: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

• BlackBerry Z10 works: "your device is not connected to a network", but the staff is OK

  Good day to all,

  We have a BDS server work with IBM Traveler.

  We have 1 user who, since this morning, cannot receive email.

  After looking around on the traveler and the BDS, servers, we found no manifest error.

  On the phone, we can see that the Internet/personal workspace work perfectly.

  But the BES 'Account' is in the status "not connected" and when you walk inside to examine the configs, we get the red message "your device is not connected to a network. To connect to a network and try again.

  That is, of course, completely false as works of personal data and its other, personal accounts work correctly as well.

  10.1 device.

  We triied what follows (no license):

  -> Stop / start the data on the device.

  -> Stop the data + mobile network > both start

  ->, Restart the phone

  -> Go into airplane mode > back to normal.

  We triied to reproduce the issue with the other 2 phones: both work well. If only 1 phone has the question.

  The BES server shows that, since the beginning of the question, we get this:

  <#03>[30371] (05/23 11:35:39.365): {0xAD4} {John Smith} Packet cancelled locally, Tag = 1520726

  We consider the deletion/re-create the account of a last resort and to explore other alternatives to build our knowledge base... but we are few ideas here!

  Any suggestions?

  Thank you very much!

  Jonathan

  you have the BlackBerry logo next to your connection?

  If not then do a batterypull while the power is on and see if it comes back

  happened twice with me

• iMac 10.11.3 continues trying to not start, no chime sound, gray with Apple logo screen, stays for about 5 to 7 minutes, then tries to start again. It was working fine earlier today.

  iMac 10.11.3 continues trying to not start, no chime sound, gray with Apple logo screen, stays for about 5 to 7 minutes, then tries to start again. It was working fine earlier today.

  It will start in recovery?

• 6500 has more: printer was working fine and then stoped feeding. Found a small gear broken wheel-shaped plastic

  Printer was working fine and then stoped feeding. I found a small gear broken wheel on the stack of paper.

  Well, your printer is broken. If under warranty call HP.

• STD R2 Windows Server 2012 was working fine this morning by restarting the server now, we get the error, choose your type of keyboard

  STD R2 Windows Server 2012 was working fine this morning by restarting the server now, we get the error to Choose your type of keyboard

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Fallout3 and Broken Steel, Point Lookout was working fine in windows7 ultimate 24 hours ago, now all of a sudden after loading when I hit continue it crashes

  original title: fallout3

  Fallout3 and Broken Steel, Point Lookout was working fine in windows7 ultimate 24 hours ago now all of a sudden after loading when I hit continue it crashes, Intel processor Core i3-2100 3.10 GHz (Sandybridge) Socket LGA1155, Asus AMD Radeon HD 6770 DirectCU 1024Mo GDDR5 Mushkin Silverline #991768 4 GB (2x2gb) DDR3 1333 MHz 9-9-9-24, thanks in advance, Morgan

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Fallout 3 is not compatible with windows 7. See the below link for the same thing:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=fallout&OS=32-bit

  Method 1:

  You can even check this link: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  Method 2:

  However, start your computer in a clean boot state, and see if that fixes the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

• I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. How can I solve this problem.

  I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. If restore system 2 or 3 days before this date my document becomes available. How can I solve this problem. I have a user and admin in this system. But the user has the power to admin. I use Windows XP.

  Hello

  · Were there any changes made on the computer before the show?

  · Who is the service pack installed?

  Follow the steps from the link below when you receive the error and check to see if this helps: how is ownership of a file or folder in Windows XP: http://support.microsoft.com/kb/308421

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I get error 1603 when trying to install Goggle Voice Chat, I am running VISTA on my dell. It was working fine then one day it just stopped... help!

  My Goggle voice chat was working fine, then one day it just stopped. I tried to reload, but all I get is error 1603... can someone help me with this? I use Windows VISTA

  Hello

  ·         What is the exact error you are getting?

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  For more information I would suggest you follow the link.

  http://www.Google.com/support/chat/bin/static.py?page=known_issues.cs

  http://www.Google.com/support/chat/bin/answer.py?hl=en&answer=162044

• my wireless was printer was working fine until what I used it to scan - and needed to use a cable for s

  Hi, can anyone help? My wireless was printer was working fine until what I used it to scan - and needed to use a cable to do so. I can no longer print wireless, Iv'e disconnected from the PC to the printer as cable seemed reasonable. What should I do? Thanks in advance

  What printer you are using?