HP 10bII +: wrong number of displayed digits
If you want your 10bII + to display two digits for example, and you want to calculate the following: 1.1234 [/] 100 [=]
You expect the answer displayed to be: 0.01 because you set your 10bII + to display two digits. But in fact the 10bII + poster 0.011.
But if you calculate for example 1 [/] 3 [=] it displays 0.33 which is correct flare response.
To double check this behavior, I discovered that my 12 c also expands the numbers displayed, but only if the rounded answer correctly would be 0.00. I discovered that by typing the following: 0.1234 [ENTER] 100 [/]. This gives me on my 12 c 0.001 accordingly. If it it would manage strictly, according to the figures to display, it should have showed 0.00. But it shows me 0.001 rather to remind me that the right answer is not null.
But if you calculate the same example with the 10bII + (configured to display two digits), it shows you the answer to four digits: 0.0012.
It's a buggy thing!
Hello
This isn't a bug, but rather the way that basically all calculators have dealt with results around 0 for very long. The problem is that when you are close, but not quite 0, these "hidden numbers" can have an impact without the knowledge of the user because they if it were "just 0" so that in reality there is a small, non zero value it. ". In some calculations, this could be quite essential to avoid new mistakes.
In the scientific calculators, you would see an exponentiated rather as 1E-3 number. Because who is not probably wished for a financial calculator, as you've seen the numbers simply extend out until you can see the non-0 value. This is to help avoid the user wins a misunderstanding that everything worked wonderfully to 0 when there was actually a non-0 value.
The 10bII + actually uses the convention of "the numbers after the decimal, or if the result is not no rounding to 0, two figures after the first significant digit of the mantissa". Unfortunately, that would open up more questions then he would avoid actually I think. A better description in the user guide probably would have understood this longer explanation, but to my knowledge, you are the only person I've ever seen validation to complain. :-)
Please keep asking questions. I think you will find that the 10bII + is actually an amazing little machine for a flight to a price. I am also the main person who writes the firmware inside, so I'm certainly happy to discuss anything whatsoever on that you want!
Tags: HP Tablets
Similar Questions
-
Wrong number of displayed issues
I created a set of 12 issue in Captivate 4 (Windows XP), and the "number of questions", said on the last slide 'Summary' and also the meter of slide (slide x of y) mean there are 13 questions and yet there are only 12 issues.
There are only 12 questions... someone has any ideas why this is and how to fix it?
Noel
Staffordshire
England
Christmas salvation
What is the link below help?
Click here to view page frequently problems in the County of issue
See you soon... Rick
Useful and practical links
Captivate wish form/Bug report form
-
How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.
Hi Infogoddess,
Thank you for using communities Support from Apple! If you try to find the serial number of your iPod touch or another Apple product, you can find information and the steps in the following articles useful:
iPod: how to find the serial number - Apple Support
Find the serial number of your Apple - Apple Support product
See you soon
-
Display wrong number of blackBerry Smartphones BB 8520
Hi all
I carried on my old number to orange and everything seems ok, but when I press the green phone button and a list of recent calls is the number displayed in the "my number" line at the top of the screen is the number I had before my number was brought to the course. I contacted Orange and they sent me a text to update my settings. This does not solve the problem. I noticed when I do that call the correct number is displayed on the right side of the screen (on appeal).
How can I ge the line "my numnber" to show my correct number?
Thank you
Brian
A simple powerd on, traction battery restart might fix this.
I know that you can hide the number on this screen if you wish, press the green line to enter your call log > Options > General Options > Show My Number = no
-
The # is not my # send my security code. You have the wrong number on file and I need to access my account. How do I allow you to select the correct number or can I change my profile somehow and change the phone number so that you can issue a new security code, or determine what is my existing code. I don't seem to have a number 7 digits on file anywhere.
Thank you
George Sedlack
Please contact support for Microsoft Outlook, Mozilla has no relationship with Microsoft Outlook.
-
BlackBerry 9000 "BOLD" My Smartphones continues to dial the wrong number
It's showing the wrong numbers when I'm looking for no - resource in contacts. It shows the wrong number, but under the name I'm looking for. 3 - 4 times I called the wrong person because my "BOLD" was and wrote a different name number, so that I'm looking. I don't know how to solve this problem.
When I type the name of the contact that I'm looking for my 9000 "BOLD" displays a list of contacts as usual, but does not have the phone number of the contact. I select another name on the list then scroll to the name that I wanted to get the phone displays the correct phone number. I have used this phone for some time and had always worked very well. This problem started yesterday. I will not sync the phone (have never, probably never will be). I have not modified or added to any software. The only thing I've done recently is added more contacts.
I also noticed that it is slower than usual when you search for names and it takes a long time so he can recognize that I typed more characters in the name of the contact before you can update the list of results.
Perform a restart of the device: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.
See if the problems continue. If they, I can't explain it, it looks like you may need to change your contacts and correct errors.
-
Wrong number of photos to import into Lightroom 6.6
HI :-)
I'm new to this, so please excuse me if I make mistakes ;-)
When I sync files in Lightroom 6.6, a wrong number of new pictures to import appears.
If I synchronize without adding new files, LR insists that 371 new files are found. However, the files are not displayed (because they aren't there, of course) but LR keep finding these "ghosts of the files.
How can I me LR to "forget" these files?
Any help is greatly appreciated!
6.6 Lightroom
Windows 10
Best regards
Thomas
Denmark
OK, as far as I know, it's what's supposed to happen when you synchronize files that have been imported from photos. County shows all photos in the folder and then, when you click on synchronize, Lightroom realizes that there is no new pictures to add, and so there is effectively nothing. If there were a few new files to add and some old files that does not need to be added, the number in the dialog box would be all the photos in the folder; and then that would be added the new files.
-
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments
Hi all
Here is the error:
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments
The following code generates the error:
create or replace PROCEDURE AMENDNUMBER_UPDATE
(
SHIP_NUMBER IN VARCHAR2,
AMEND_NO ON SYS_REFCURSOR)
AS
BEGIN
UPDATE CSPS_SHIPMENT_INFO_TL
SET AMENDMENT_NO =
(SELECT AMENDMENT_NO + 1
OF CSPS_SHIPMENT_INFO_TL
WHERE SHIPMENT_NUMBER = SHIP_NUMBER
)
WHERE SHIPMENT_NUMBER = SHIP_NUMBER;
AMEND_NO OPEN FOR SELECT AMENDMENT_NO FROM CSPS_SHIPMENT_INFO_TL WHERE SHIPMENT_NUMBER = SHIP_NUMBER;
-VALIDATION;
END AMENDNUMBER_UPDATE;
now when I try to run the under statement I get the above error:
exec amendnumber_update (ship_number);
Please suggest how to manage...Hello
TCSBPMUSER wrote:
Hi all
Here is the error:
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of argumentsIt's one of these error messages that actually means what he says.
The following code generates the error:
create or replace PROCEDURE AMENDNUMBER_UPDATE
(
SHIP_NUMBER IN VARCHAR2,
AMEND_NO ON SYS_REFCURSOR)
AS...now when I try to run the under statement I get the above error:
exec amendnumber_update (ship_number);The procedure requires 2 arguments.
You try to call with only 1 argument. It's the wrong number of arguments.To call the procedure from SQL * Plus, you can do something like this:
VARIABLE rc REFCURSOR EXEC amendnumber_update (123, :rc);
The 1st argument is an argument IN, so you can pass any kind of digital expression. (I used a literal above.)
The 2nd argument is an OUT argument, so you must pass a variable. (I used a variable link above.) -
A wrong number or types of arguments in the call to stored procedure
Hi all...
I'm missing something simple here, but I don't see what it is.
I have looked around and cannot know what the problem is.
Calling a stored procedure in Oracle 11g of Java 6.
Here is my code:
Here are my stored procedure:CallableStatement proc = null; proc = conn.prepareCall("{ call storedProc(?, ?, ?, ?, ?) }"); proc.setString("p_header", "8YR6TG"); proc.setString("p_optype", "A"); proc.registerOutParameter("p_headerCursor", OracleTypes.CURSOR); proc.registerOutParameter("p_detailCursor", OracleTypes.CURSOR); proc.registerOutParameter("p_status", OracleTypes.VARCHAR); proc.execute();
Here's the exception I get:PROCEDURE storedProc ( p_header IN VARCHAR2, p_optype IN VARCHAR2, p_headerCursor OUT R_CURSOR, p_detailCursor OUT R_CURSOR, p_status OUT VARCHAR)
Can you see what I'm doing wrong here?java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'storedProc' ORA-06550: line 1, column 7: PL/SQL: Statement ignored at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:305) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272) at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:626) at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:181) at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:870) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1081) at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2905) at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:2996) at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4120)
Thanks in advance for your comments!
Published by: Brady on February 16, 2012 13:02try to use digital indexes instead of parameter names.
-
PLS-00306: wrong number or types of arguments in the call to "TO_CHAR.
Hi guys, I learn Pl/SQL. Writing a simple function which allows to calculate dates. It takes contract_date and determines the date of the following Sunday.
My current code has the compile error: PLS-00306: wrong number or types of arguments in the call to 'TO_CHAR' which I believe has to do with the to_char (trunc(contract_date,'D')): = contract_weekday;
I don't understand what the problem with my return it...
Here is my code: thanks for any help!
display errors
create or replace FUNCTION
contract_dates(contract_date in date)
DATE OF RETURN
IS
starting_sunday DATE;
-DATE of ending_saturday: = starting_sunday + 6;
contract_weekday varchar (32);
days_add NUMBER;
BEGIN
TO_CHAR (trunc(contract_date,'D')): = contract_weekday;
case contract_weekday
When 1 then days_add: = 6;
When 2 then days_add: = 5;
When 3 then days_add: = 4;
When 4 then days_add: = 3;
When 5 then days_add: = 2;
When 6 then days_add: = 1;
Another days_add: = 7;
end case;
starting_sunday: = contract_date + days_add;
To_date (starting_sunday) RETURN;
END;It is the reverse:
CREATE OR REPLACE FUNCTION contract_dates(contract_date IN DATE) RETURN DATE IS starting_sunday DATE; --ending_saturday DATE := starting_sunday + 6; contract_weekday varchar(1); days_add NUMBER; BEGIN contract_weekday := to_char(trunc(contract_date,'D')); case contract_weekday when 1 then days_add := 6; when 2 then days_add := 5; when 3 then days_add := 4; when 4 then days_add := 3; when 5 then days_add := 2; when 6 then days_add := 1; else days_add := 7; end case; starting_sunday := contract_date + days_add; RETURN to_date(starting_sunday); END;
-
How to remove the wrong number of contact to appear in Messages
Don't know where to post this.
Seems that when I go to messages and type a name for a person to text, it evokes their old phone imessage prime number... and not their number today (that) actually in my address book. I know in Mail, you can click and "forget address" or something like that, but doesn't seem to be in nature for Messages.
Well thanks for the help!
Aaron
To resolve this issue, try disabling iMessage (settings > Messages), then restart your phone (by pressing the power button), tap Settings > phone > my number and confirm that it is correct. If this is not correct, please enter the correct number), then turn iMessage on (settings > Messages) and go to settings > Messages > Send and Receive and see if the correct number is displayed under "start new conversations of:
-
Utility disk first aid indicates that it is a wrong number of hard file links
After various software update yesterday the Mac mini has had several problems. I ran disk utility first aid, and he says 'wrong number of hard file links.
Which allows to fix this?
The drive has been successful to repair by disk utility?
You must boot from recovery to repair the startup disk
OS X: on OS X Recovery - Apple Support
What problems did you have?
-
How can I get the number of display automatically on a table line?
I have an array of measures, and I would like the line number to display on each line. The challenge is that everytime I run the program, the total number of lines will be different, so I'd figures updated every time that I run the program based on the current number of lines.
I've attached a picture to illustrate what I'm doing.
Find the attached example (registered in the 2009 version), and you can extract what you need for your code!
-
I can, t our user access in Control Panel; is a message "wrong number of arguments or invalid property assignment.
Hello
I suggest you follow the troubleshooting steps form the article and check if it helps.
Cannot open the item user accounts in Control Panel on a Windows XP-based computer
http://support.Microsoft.com/kb/919292
Hope this helps
-
ApexExport 06550 PLS-00306: wrong number or types of arguments
My work of ApexExort was running great until about a month and I can't pinpoint the problem. If I run it in production, I get the following error. However if I run it on my localhost even exact script works very well.
Exception in thread "main" java.sql.SQLException: ORA-06550: line 2, column 12:
PLS-00306: wrong number or types of arguments in the call to 'EXPORT_APPLICATION_TO_CLOB '.
ORA-06550: line 2, column 5:
Set ORACLE_HOME=C:\Oracle\product\11.2.0\dbhome_1
set CLASSPATH = % CLASSPATH statement; \;%O RACLE_HOME%\jdbc\lib\ojdbc5.jar;%apexExportJavaDir%
set PATH = % PATH %; \;%O RACLE_HOME%\Bin
JAVAHOME value = C:\Program Files\Java\jdk1.8.0_45
Set startRunLocation = \\mgasan2\hdrive\ATS_Working\Scott_Working\PROD_SCRIPTS\APEX_APP_BKUP
CD C:\apex_4.2\utilities
All applications to export REM
Java oracle.apex.APEXExport - db %oracleHost%:%oraclePort%/%OracleServiceName%-utilisateur % oracleUser %-% oracleSystemPass %-forum password
< gphmh >
Thanks for your suggestion of Kiran, but I understood what my problem was. The APEX version in our database is older: 4.1.1.00.23 and I have been using a version 4.2 utilities apex when I should have used the C:\apex_4.1.1_en\apex\utilities
CD C:\apex_4.2\utilities
C:\apex_4.1.1_en\apex\utilities
For the record, here's what worked for me...
Set apexExportJavaDir=C:\apex_4.1.1_en\apex\utilities
Set apexHtmlFileName = apex_info.html
BackupLocation = c:\PROD_SCRIPTS\APEX_APP_BKUP\OUTPUT\TEST set
Set ORACLE_HOME=C:\Oracle\product\11.2.0\dbhome_1
set CLASSPATH = % CLASSPATH statement; \;%O RACLE_HOME%\jdbc\lib\ojdbc5.jar;%apexExportJavaDir%
set PATH = % PATH %; \; C:\Program Files (x 86) \Java\jre7\bin
Set startRunLocation = c:\PROD_SCRIPTS\APEX_APP_BKUP
FIXED % apexExportJavaDir %
Java oracle.apex.APEXExport - db %oracleHost%:1521/%OracleServiceName%-utilisateur % oracleUser %-% oracleSystemPass %-forum password
Maybe you are looking for
-
I can only open Firefox Web sites by using a url link. If I try to type something into the address bar it not even trying to load the page, no circle of loading, no error or no connection message. I'm on youtube.com and I type in Google.com and tape
-
El Cap use for the day that it was released. However, for these last months, the Safari has become more increasingly unstable. It freezes often temporarily and then unlock. Worse still, it freezes often completely to the point that my only option
-
Is it possible to change video card?
Hi all It is possible change the laptop video card or increase the amount of dedicated memory? TKS
-
Can no longer access Windows Update
I can't access Windows updates more. He told me that I no longer the software to run it and wonder click to re - install and save again. When I do that, it will install, 100%, with 100% but still nothing happens? Can you help me
-
My all-in-one HP beeps every 5 minutes, even when unplugged. It started last night and lasted all day today. Always properly, it works fine except for the incessant ringing. What could be? A beep every 5 minutes...