HP 110 - 3098 M R mini laptop computer: cannot go beyond the Admin power on password screen

Hello

I tried all the tips mentioned in previous messages, but cannot cross the admin/power on password for our mini 110 HP screen.  Serial number is CNC0433JK8.  Do you have additional suggestions?  Thank you!

Hello

Please enter:

64951999

Kind regards.

Tags: Notebooks

Similar Questions

  • HP mini 210 computer: I do not know my power on password

    Ive had this laptop for a few years. I bought the new laptop and use this one since then. recently, the laptop I bought was released. now I am back in my notbook, but I do not (my power on password) when I get it wrong 3 times, I get this - (DISABLE-58687407 SYSTEM) can someone help me please

    Hello:

    Please see this post that should solve your dilemma.

    stems-and-Software/System-Halt-Error-Mes http://h30434.www3.HP.com/T5/notebook-operating-Sy...

    Then...

    You can:

    1. use the unlock code you generated to enter BIOS

    2 disable all passwords that are enabled in the Security menu of BIOS.

    3. If the request for current password - enter the unlock code

    4. for the new password, simply press the ENTER key

    5. repeat the same thing to check the password column.

    6. then exit the BIOS saving & exit option to save the changes.

  • Computer laptop MSI cannot go beyond the BIOS at startup

    Hello world!

    I'm trying to fix computer MSI laptop of my roommate (I don't have access to this right now, but I'll post the pattern later) which initializes more. He said he picked up the phone and moved to a different location on his desk before encountering this problem. When you turn on the laptop, the MSI and other logos appear. According to my roommate, the function keys to access the BIOS settings usually appear shortly after turning on the power, however they do not appear and the system never moves past this white screen of the BIOS. The motherboard doesn't give any beeps or other diagnostic codes. Here's what I did in an effort to fix it until now:
    • Took a CD - RW in the optical drive (there is no boot sector and the optical drive has priority boot).
    • Disassemble the laptop and re sitting 3 sticks of RAM, for a total of 12 GB. One of the sticks seems to have a small spot on one of the contacts, and I removed it by rubbing lightly with a gum pink pencil.
    Unfortunately, we have not made any progress, and the problem persists as described. Normally I would Flash the BIOS at this stage, but since there is no startup options, what else could be?
    Note: the dual-boots Windows 8 (primary) and Ubuntu 12.04 LTS, system with the GRUB bootloader used for the selection of the OS.
    Thank you in advance for your help!

    Hello

    If you can't even get into the bios, you need to look in the manual for a CMOS\Bios 'Clear' or the 'Reset' button or the rider...

    If you can get into the bios, make sure that the graphics card is set up correctly...

    Some machines have a CPU\GPU with an additional AMD or NVidia graphic chip combo...

    The machine may be trying to use the bad.

    Try to remove EVERYTHING except one that the memory sticks, and one by one try them individually...

    Also try to isolate a possible bad slot trying a few sticks of different in each slot individually.

  • CQ5800 COMPAQ LAPTOP: COMPAQ CQ58 IS ASKING FOR ADMIN/POWER ON PASSWORD PLEASE HELP...

    SYSTEM DISABLED CODE IS (92792464)

    @DAHAMMER77

    Enter 23690460

    REO

  • How to check only my laptop computer use integrated or the AMD graphics card?

    How to check only my laptop computer use integrated or the AMD graphics card? Some games show me that they use the built-in map: http://img849.imageshack.us/img849/4125/98ab1c28dc9f4b51b537435.png ?

    I have no other option. I have disable Intel card in Device Manager, and it shows me that the AMD driver is not installed correctly. Thank you.

  • I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

    I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

    Hi JessaRoy,

    · The computer connected to the network or are they computer autonomous?

    · What is the number and the model of the computer?

    · What is the service pack installed don the computer?

    · What is the full error message with the error code, that's all?

    · What are the steps you tried to solve the problem?

    Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

    I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

    * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

    Hi jsserrano68,

    Read the following article about the product keys for Windows:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

    In addition, if you need to contact Toshiba support:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

    Thank you

    Deb

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail.

    Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail. I tried to clear the cache and restart Firefox, but I still cannot use Hotmail.

    Not this problem when I go to Internet Explorer.

    Hello, it was noted that the foxit pdf plugin is causing this issue. You can disable this plugin in firefox > addons > plugin until what foxit offers a patch/update for the plugin.

  • Your computer cannot connect to the remote computer

    Hello

    OT:

    Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

    I implement the remote desktop session based on Win Server R2 2012.

    I create a free sign for certificate certificate and also install the certificate to the client computer.

    But when I click on any application it shows me error.

    Hello

    You may need to ask the question on the TechNet forums. Please post the question here:

    https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

    Kind regards

  • My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

    My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

    and also installed the latest driver by using the Software Update Wizard software.

    That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

    The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

    I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

    If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

    Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

    MalwareBytes AntiMalware

    SUPERAntiSpyware

    Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

    Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

    Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

    Uninstall all software from Dell to control panel > Add / Remove programs

    Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

    Close all running applications (anything with an icon on the taskbar).

    Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

    After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

  • My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

    My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

    Hello

    • What connection do you use?
    • What is a wired or wireless?
    • What happens when you try to start Internet Explorer?
    • You receive an error message?

    You can check these links:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    http://support.Microsoft.com/kb/956196

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  • Printer problems. Error "computer cannot communicate with the printer.

    I had problems to access Windows Explorer and the rep Dell IT installed Mozilla Firefox 4.0 Beta 10 for my Windows Vista as an alternative.  Now my Dell AIO 946 printer does not work.  Whenever it is fixed, it prints until I am notified to download an upgrade of the system.  After that I downloaded the upgrade, the printer does not work yet.  The ink cartridges will not align.  I get a message of "remove stickers ink", which is clearly not the problem because the cartridges are not new.  Now, I get a message that says "computer cannot communicate with the printer.  I re-installed the printer several times, disconnected from the power source and the URL and re-connected.  Nothing seems to work.  Any positive advice will be appreciated.

    grandmainontario,

    You can copy a document under the glass? B & W and color?

    If so, executing delete print jobs to remove items stuck print jobs in the queue.

    Unplug the printer.

    Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

    Restart your computer.

    Download the Vista drivers.

    Install the Vista drivers. You will get a message, the printer is not connected. Connect the printer at the moment (power on)

    You will find links to the patch/drivers to...

    Reference Dell 946 Photo all-in-One Printer owners thread (W7)

    Also try this tweak...

    Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

    Go to the section USB controller, and then click the plus sign +.

    Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

    Restart your computer.

    You can also read...

    You cannot print or preview before printing a Web page in Internet Explorer 9

    Rick

  • Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

    Error is the standard:

    This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

    The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

    When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

    No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

    All computers on the domain work for RDP is only now a single computer.

    Error is the standard:

    This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

    The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

    When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

    No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

    All other computers on the work of field for RDP is only now a single computer.

    This post on the forum of MSFT Services Office to remotely help...

    http://social.technet.Microsoft.com/forums/en/winserverTS/threads

  • HP250G4 (M9S81EA): the laptop computer does not see the usb cable

    Hello, have a problem with HP250G4 (M9S81EA), doesn't want to install cable diagnostics. After you install the cable drivers, win10-64 cannot define it. All the drivers are installed on your laptop and work properly. The cable is the same worker checked on another laptop. None of the Google tips help not hurt for 3 days with this problem. I hope for your help.

    USB device not recognized
    Works Yusb last device connected to your computer, and windows cannot identify him.

    The request failed usb device descriptor

    I installed on this laptop Win 7.8.10 and the unit still does not work, I think it's a hardware problem of the laptop. But at the same time, other usb devices are working properly on...

    < feature name = 'Application' type = 'Description' sequence-id = "3" >
    < attribute name = "a0" value = "HPAdvSysDiag_USBPort" / >
    < attribute name = "a1" value="5.9.0.0"/ >
    < attribute name = "a2" value = "2" / >
    < attribute name = "p1" value = "09/11/2015" / >
    < attribute name = "p2" value = "F.1A" / >
    < attribute name = 'p3' value = "96.39" / >
    < attribute name = "p5" value = "" / >
    < attribute name = "p15" value = "2" / >
    < attribute name = "p16" value = "0" / >
    < attribute name = "p17" value = "0" / >
    < attribute name = "p20" value = "00000001" / >
    < attribute name = "p4" value = "1" / >
    < attribute name = "p0" value = "2015-12-26 22:45:56" / >
    < attribute name = "p10" value = "0" / >
    < attribute name = "d15" value = "F3" / >
    < attribute name = "a4" value="00.00.00.34"/ >
    < attribute name = "d0" value = "3" / >
    < attribute name = "z0" value = "94L7PW-7R07T8-XD7WMF - 8 d" 7403 "/ >
    < attribute name = "e0" value = "434" / >

    Help someone or not?

  • HP G62 laptop computer cannot start windows.

    Run the test at the start and test drive, both give the same error.

    type: startup

    result: failure

    Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)

    Description: hard drive 1

    type: hard drive

    result: failure

    Failure ID: PG81W4-5L36A1-MFKR4J-6OU5O3 (not sure if they are equal to zero or a letter O in tientirely)

    Description: hard drive 1

    so, I guess, it's the hard drive, no?
    How should I proceed?

    Additional info:

    Model: HP G62 laptop computer

    Prod.ID: LF772EA #ABZ

    running windows 7

    Hello

    The error code will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

Maybe you are looking for