HP 1102w printer

Similar Questions

• HP Laserjet Pro 1102w: printer recorded more than once how can I remove the extra

  An attempt to get this printer to print, I registered several times in the same printer. I want to dele dupes. How?

  Hi @rosehumm,

  Thanks for posting in the Forum from HP Support.

  I see that you are looking to remove duplicates of your HP Laserjet Pro Google Cloud Print 1102w printer.  I would like to help.

  I tested this point in my office and found that the removal of the printer is easy to use.  Here's how:

  • Sign in to your account to Google's Cloud.
  • One at a time, click the name of your printer and click on remove, as shown in the screenshot below:

  

  I would like to know if it works for you.  Thanks again for your post and have a great day!

• Wireless, HP 1102W printer won't stop printing

  When I send a print job to the printer wireless 1102W requesting a copy, it prints continuous copies until the printer is out of paper. Help! I'm running out of paper and toner...

  It happens to my two computers: one using Windows XP and the other using Windows 7.

  Thank you.

  This can often happen depending on how network installation has been made.  Usually, there should not be problems if you used the Install Smart or connected by the network installation CD.  Can run into problems with a Standard TCP/IP port configuration if the driver has been added another way.

  Administer a test.  Basically, disable the 'bidirectional support' setting in the driver.  Here is a link to a doc:

  http://support.HP.com/us-en/document/c02205132

• default 1102w printer

  Hello

  I have a laser 1102w.i printer can not to it as a default printer.also I cannot print the pdf file.

  Thank you

  @hbga

  I did some research on the error code you have posted. What I found was that it was a windows registry error code... so... He good new is that it has nothing to do with the printer

  It is the new not very good... it is a problem of windows registry or a corrupted profile and resolutions only I could find for you had to create a new user profile.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• LaserJet Professional P 1102w printer green light blinking, but will not be printed

  I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

  But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

  I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

  Help, please.  Thank you.

  Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

• HP 1102w: printer wireless, Hp 1102w reinstalled and says use printer offline

  Hello I recently changed my suppliers and changed to a router different had verizon has worked for years changed to twc with an arris TG1672g router I can print the first test wireless page, but when I try to print anything else in the see what's printing box it says printer use offline, I've tried printer audit of the United Nations in offline mode and then he goes to the printing error that it will work when I connect the usb cable from the suggestions

  Hey @Lucastrujillo59,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve the printer offline issues you encounter with your HP LaserJet Pro P1102w printer on your Windows 7 computer since installing a new router. Please follow the steps below to fix this problem.

  Step 1: Uninstall the drivers:

  Even if your printer prints first page initial well thanks to new wireless, there are chances that your drivers are not properly configured for the new network connection. I'll have to make sure that everything is installed and is successfully, you uninstall and then reinstall your drivers.

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select your Printer HP Laserjet
  5. Select Uninstall

  Follow them on the instructions of the screen to complete the uninstallation of your printer. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start when you click it, type %temp% , and press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  4. Select "delete" on your keyboard. No real files and folders will be affected by deleting the temporary files on your computer. If one of the temporary internet files will still be used by a program on your computer you receive automatically pop up to 'jump' the question.
  5. Once you empty the Temp folder, close the file.
  6. Right click on your recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the drivers:

  1. Please click here to download the full feature software and drivers for your printer
  2. Once the site opens click on the download at the top left button
  3. Allow the download to run when prompted
  4. Follow the prompts on the screen to reinstall your printer.
  5. After choosing the option Wireless printer should be found on your network. Select your printer and press 'Next' or 'continue' to complete the installation.

  Once the reinstallation is finished, please try again to print. Should you still be problems there are additional steps, I will have you go through. I can't wait to hear strings attached good luck!

• Multi-page printing on Laserjet 1102w

  I use a HP Laserjet Pro printer of 1102w wireless on a home network.  The operating system is Windows 7 (64-bit).  A computer print very well and the other prints multiple pages of a single page document.  I checked the settings and I can not just understand what is the cause.  I tried to uninstall the printer and the software and reinstalled.  He moved so easily and that a page will be printed when you do a test page, but if I print from Word, I get as much as 50 and as low as 10, but never just.

  If someone is familiar with this printing problem, please get back to me as soon as possible.

  Thank you!

  Hi, on the computer that prints multiple copies

  go to devices and printers

  Right-click on the icon of the 1102w printer

  Printer properties

  Ports

  Uncheck the box "enable bidirectional support".

  Click APPLY

• Google Cloud Print with HP 1102w problems

  I have a HP 1102w printer that I'm unable to put up with Google Cloud Print.

  What does not work:

  * After I register the printer with google cloud print successfully, it sends a test page. The test page is indefinitely in the google cloud print queue. HP eprint site indicates the work received in vain (under recent print jobs).

  * I also tried printing from Gmail on Android and the same problem occurred (see google queue, error indicated on the list of recent jobs HP eprint)

  What works

  * Print e-mail address eprint printer

  * Airprint of iPa

  Conventional printing over wi - fi local networ

  Details

  * I have updated the firmware to datacode: 2011082

  * HP eprint is enabled on the printers web pa

  * I do not have a proxy serv

  This widget could not be displayed.

• LaseJet 1102w more airprinter issues as well as config network home

  I have HP Laserjet 1102w printer in my network as follows:

  192.168.1.1 modem ADSL in my room--> 192.168.1.2 TPLINK TL-WR941ND in my room--> 192.168.1.3 TPLINK TL-WR1043ND (AS A REPEATER) in my office to another floor of my house. The printer is in my office.

  The printer works fine using my laptop. I can print everywhere.

  But when you try to print from an Ipad or an Iphone, I can't print from my room. No printer does appear in airprinter (ipad/iphone).
  When the two ipad or iphone gets Repeater (away from 192.168.1.2 router TPLink) your printer in the airprinter
  So I can not print from my room when using ipad/iphone.

  What I am doing wrong?

  I would like to print all over with my ipad/iphone. Y at - it a config to 192.168.1.2 router?

  The printer has static IP 192.168.1.11

  Thanks in advance.

  This is because the printer and iOS devices must be on the same network, if one is on the primary and we're on the Repeater, it probably won't work. As I have already mentioned that AirPrint often does not work on repeaters or sensitive areas because of the way they interact on the network.

  -Spencer

• 1102w: computer says printeroffline

  I 1102w printer that wolrks fine on Win 7 machines.  Drivers installed (both x 86 and 64-bit) on the new laptop Dell with Win 10. Printer is detected by the computer, but shows both in offline or not turned on. Followed first pilot than offerred Win 10. Then to disc HP and installed driver - first to 64-bit but then added 32-bit.

  Checked the HP site and was informed that the driver is up-to-date. When I try to print the test page, download the message that the printer needs attention. Not surprising because he thinks that the printer is offline or not on.

  I'm not an expert with these things and would like to receive words of advice on one resolution--other than staying away from winning 10.

  Thank you in advance.

  Hi @BonsaiBill,

  Thanks for joining the Forums of HP Support for a solution to your problem of connectivity.

  I understand that you have a printer HP LaserJet Pro P1102w which connects very well to your Windows 7 PC, but will not print from PC Windows 10 because he says that it is offline. I would like to help with that.

  It can help to add the printer to the devices and printers using a TCP/IP port.

  

  If the problem persists here is a document of support that can help - "offline" Status Message printer (Windows 10).

  Please let me know if that solves the problem, or if you need assistance.

• Clubhouse 15-ab262nr: HP Envy 4500 on Hp Pavilion Win10

  After installing my HP Envy4500 (wireless) on my new HP Pavilion 15 there is no printer Assistant available to allow analysis of the laptop. Printing is fine and I can scan from the control panel to the desktop from the laptop. Always available on my HP 1102W Printer Wizard.

  Hello @onslo.

  Welcome to the Forums of HP's Support. I understand that you have a problem with the HP printer Assistant. I would like to help.

  I want to confirm that you are referring to the Envy 4500 printer and it is connected wireless and not the Officejet 4500 wireless printer.

  Have you tried running the HP print and Scan Doctor?

  If you have, what was the result?

  I await your response.

• HP 1102 W on Mac with Lion

  I use a 1102w on a mac with a lion for some time with no problems but I just upgraded my machine and changed my ISP.

  For some reason any printers must be put back. I followed the procedure to insatll disk and was then charged with updating the firmware of the printer that I have done, since, so I can't get a wireless connection.

  The printer configuration page says not connected and IP = manual configuration.

  Under wireless settings

  Enabled state

  Ad-hoc communication mode

  the name (SSID) HP840B7E natwork

  This isn't my network SSID

  If I connect to this network when wireless rest

  Question how to re set up the details of the network because I can't go to the printer web page

  I tried the printer redefine the procedure without success

  I have fixed as follows.

  Connected a laptop Win XP without the 1102w printer installed on it.

  Used the HP installation disc and select Install option wireless

  Followed the instructions

  Hey Presto it finds the network and when I then turned off the laptop and on the mac mac would find as a wireless printer and it all works.

  Thank you very much for your help, it seems that MAC installation is kind of suspect because it does not give the option Wireless install

• LaserJet P1102w: Status = stopped

  My new HP 1102w printer range appear to be installed correctly, but do not print.

  I use Ubuntu 15.10 with all latest updates.

  When I try to print a Test Page, everything seems like it goes smoothly, but nothing prints. When I check the print queue, State says "stopped". The icon 'Release the selected works' is disabled.

  The printer works great under Windows, is apparently not the printer.

  I also tried this using another computer using the same version of Ubuntu 15.10, but get the same result.

  I have a HP Officejet Pro 8610 and it works fine on the same two computers.

  Until he died a few days ago, I got a HP Laserjet 4 running on the same two computers (no changes made to the system since that time).

  3.15.7 HPLIP system installed (current version is 3.15.11)

  I tried to uninstall and reinstall the printer, but no change.

  When I install the printer through the USB port, I also get the same result. When I click on task attributes, here are a few lines of probable cause:

  job-printer-State-message filter failed

  job-printer-motivation ['jplip.plugin - error ']

  work-motivation job finished-with-error

  Every other printer I installed worked fine - just this 1102w gives me the penalty. Any help would be greatly appreciated. Thank you.

  Hi @StephenMcGehee,

  Thank you for taking the time to post in the Forums of HP. I understand that you're having trouble with Linux printing.

  Although my knowledge of the support is limited to the Mac and Windows operating systems, I have found a link that might help you: HP Linux Imaging and printing.

  Please let me know if that answers your request. Be sure to mark your post as solved by clicking on accept it as a Solution.

• I want to reset hp p1102w wireless default IP address manually

  I want to reset hp p1102w wireless to the default IP address manually without a web brouser wireless connection.

  I'm on win7

  I tried to set a fixed IP address of 192.168.1.101, but I used the false mask of 255.255.0.0

  I could use 255.255.255.0

  So, when I use the hp Wireless Setup is says I can connect to the printer, but the network is bad.

  So I couldn't reset the IP address and the mask for the correct values through the fbrouser web.

  I noticed that with my 2 other similar printers there is a checkbox indicating the reset default wireless.

  I wonder if it is possible to set the default settingson the printer manually without an internet connection to web brouser?

  What can I do to solve my problem?

  Any suggestions you can give me, I would apprectiate.

  The proposed document was good and all

  I liked the section 'Download updates of the firmware for your hp printer'

  I found a paper by Shiomil "the HP 1102w printer stuck manual IP".

  solved my problem

  To reset the default firmware values "lbuttons cance and wireless-press and then switch the printer"

  After that, I ran the standard wirless install procedure and has obtained an IP address from the printer proveided by the DHCP router.

  Then I used the brouser with this IP address for the printer setup page.

  Then I reset the IP address to the IP address fixed, I want to use the printer.

  That solved my priobelm

  Thanks for your help!

• Using with a Mac running 10.6.8 1102w. Button PRINT is not launched more what empty tray.

  Using with a Mac running 10.6.8 1102w.  Button PRINT is not launched more what empty tray.

  Hello

  You can also resume the print job from the device itself.

  In order to resume the print job and continue the print job from the same place, once you put more paper in the drawer open and close the top page toner access door and the work will continue.

  Shlomi