HP 1217 starts printing VERY slowly. A web page took 15 minutes to start printing!

Similar Questions

• What would cause the mouse to scroll slowly on Web pages, but normally on text documents?

  I have a strange problem. I have a Logitech M305 mouse on another machine which is too slow scrolling on Web pages. I ordered a new mouse, but today I noticed the old mouse normally scroll in text documents, even though the text document is displayed in Firefox (such as the "subject: config" page).

  Normally, a page will scroll 3 lines for each click of the mouse wheel.
  On Web pages, it changes and it takes 3 clicks of the mouse wheel to get the page to scroll.

  It is troubling to move the mouse wheel and don't have anything happen until the third click.

  So the question is, what would make the mouse wheel behave differently on the Web pages and pages of text, and how can I solve this problem?

  BTW, this is a clean install of Windows 7 64-bit. I use the same exact type of install now on another machine with a mouse Logitech M510 and normally scrolls on all pages.

  OK, a final report on this issue. Yesterday, before installing the new mouse M325, I decided to uninstall the Logitech SetPoint software. I wanted a new installation of the software for the mouse to go with the new mouse.

  To my surprise, after the set point has been uninstalled the old mouse M305 scroll normally on pages of text and Web pages. It seems that something mysterious happened in the relationship between Firefox and the original installation of set point. Firefox made some adjustments or updates of its own regarding record just as it does for modules, I saw it happen a couple of times before. /shrug

  New mouse + set works perfectly with FireFox now and the old mouse M305 + setpoint is now works well with an old laptop XP Pro, at least as long as the button pop-up gimpy holds.

  Solution, in this case: uninstall the Logitech SetPoint mouse software, and then reinstall a new copy of it.

• MacBook Pro (3-inches, mid-2012) suddenly started running very slowly; Beach balls very common

  About a week and a half, it started running very slowly with the spinning beach balls popping up all the time.  This reminds me of how when I have too many tabs of the browser as in the past, but now, even with browsers had closed, open Word or Skype is really slow.  (I'm sorry for any confusing formulation; I'm not very computer customer connected, unfortunately!)

  Some of the things I've tried so far and EtreCheck below):

  -safe mode

  -detection of hardware problems (control + D)

  -reset the PRAM

  -using the utility disc for repair/first care; also check

  -wipe the hard drive and reinstalling original OS X Lion (was still slow with beach balls; I tried to install OS X El Capitan to see if that would help, but installation could not finish)

  -wipe the hard drive and restarting from a backup previous (one month before the problems started)

  EtreCheck version: 3.0.3 (307)

  Report generated 2016-09-11 17:51:16

  Download https://etrecheck.com EtreCheck

  Duration 34: 39

  Performance: poor

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Problem: Beachballing

  Description:

  also very slow in general

  Hardware information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Technical details] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 1054

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  System software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disk information: ⓘ

  TOSHIBA MK5065GSXF disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 go-go (349,39 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS31N)

  USB information: ⓘ

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Information crush: ⓘ

  Apple Inc. Thunderbolt_bus.

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [loaded] 6 tasks Apple

  [loading] 164 tasks Apple

  [operation] 68 tasks Apple

  Demons of launch system: ⓘ

  [loaded] 43 tasks Apple

  [loading] 161 tasks Apple

  [operation] 85 tasks Apple

  Launch officers: ⓘ

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  Launch of the demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-06-29)

  [loading]	com.google.Keystone.daemon.plist (2016-09-11) [Support]
  	[loading]	com Microsoft.Office.Licensing.Helper.plist (2011-03-10) [Support]

  Launch User Agents: ⓘ

  [loading]

  com.valvesoftware.SteamClean.plist (2016-05-14) [Support]

  Internet Plug-ins: ⓘ

  	FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support]
  	QuickTime Plugin: 7.7.3 (2016-04-05)
  	Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support]
  	Default browser: 601 - SDK 10.11 (2016-04-05)
  	o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-21) [Support]
  	SharePointBrowserPlugin: 14.2.4 - SDK 10.6 (2012-10-03) [Support]
  	googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-12) [Support]
  	Silverlight: 5.1.10411.0 - SDK 10.6 (2014-03-29) [Support]

  The internet user Plug-ins: ⓘ

  Web of Google Earth plugin: unknown (2013-01-24)

  The Safari Extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2015-10-14)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-29) [Support]

  Time Machine: ⓘ

  	Mobile backups: WE
  	Automatic backup: YES
  	Volumes to back up:
  	Macintosh HD: Disc size: 499,25 GB disc used: 149,86 GB
  	Destinations:
  	X. backup [Local]
  	Total size: 999,86 GB
  	Total number of backups: 7
  	An older backup: 05/01/16 17:26
  	Last backup: 28/08/16 23:43
  	Size of backup drive: adequate
  	Backup size 999,86 GB > (disc 149,86 GB X 3)

  Top of page process CPU: ⓘ

  	11%	Firefox
  	4%	kernel_task
  	3%	hidd
  	2%	sandboxd
  	2%	WindowServer

  Top of the process of memory: ⓘ

  	1.00 GB	Firefox
  	457 MB	kernel_task
  	291 MB	mdworker (15)
  	143 MB	mds_stores
  	90 MB	Microsoft Word

  Information about virtual memory: ⓘ

  	36 MB	Free RAM
  	3.96 GB	Used RAM (657 MB cache)
  	0 B	Swap used

  Diagnostic information: ⓘ

  	Sep 11, 2016, 16:37:21	Self test - passed
  	Sep 11, 2016, 09:20:57	~/Library/logs/DiagnosticReports/suggestd_2016-09-11-092057_[redacted]. Crash
  	/System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/s uggestd Thank you in advance for your answers - I'm just at a loss for what could be the real problem!

  You Mbps HARD drive is suspect.  Start the recovery (COMMAND-R) partition and select in menu 4 disk utility.  Run disk utility > first aid > repair.

  Unrelated, but your battery has seen a lot of use.  I suggest to replace.

  Ciao.

• 7851D HPF: HPF 7851D prints very slowly (see docs swiped photos)

  Hi my printer recently started printing very slowly. Its as if she "sees" the word documents, PDF etc. because it they are pictures. I can't see anything in the properties to change that.

  What I think happened recently is I upgraded from Windows 8 to 10.

  Any help would be great.

  Thank you

  I recommend removing your current driver and by downloading and installing the latest driver from hp.com.

  I recommend you find the driver on hp.com before you remove the existing driver.

• PSC 2175 printing very slowly

  Hello

  My HP psc 2175 all-in-one suddenly started printing very very slowly.

  No new drivers have been installed, or any other configuration change was made, so I have no idea what could have happened.

  Any clue?

  Thnks.

  Hello Soldadoryan, there are a few reasons for this. In simple terms, it could be due to the age of printers and use. Maybe this isn't the case in this case, however.

  Power supply from the printer is connected directly to a wall or connected by a surge protector? Visitors are often surprised the difference in performance when they connect the power supply directly into a wall socket because our printers have built in surge protector.

  After to change that, I would recommend checking and updating the firmware of the printer if necessary. The document here will guide you through this just to solve this problem.

  I hope this helps!

• My 4300 Officejet prints very slowly.

  My officejet 4300 print s very slowly. It will be printed in the first half at normal speeds then slows down the way for the second half. I use Vista. I turned it off and unplugged the printer and the computer and waited for an hour. When I started, I still had the same problem. This just started today. Thanks for your help.

  Hello

  I woulc check inks then firstly check the connection. How do you connect your printer?

  Kind regards.

• Portege A100 suddenly started going very slowly

  Hello

  I have a Portege A100, which suddenly began to go very slowly. It takes 5 minutes to load completely upward when it was much faster. I tried to reload Windows on it several times, but as soon as you start loading other pieces of software on the speed significantly deteriorates.

  I also tried to use software to completely clean the hard drive before Windows on it but this does not solve the problem either.

  Any help would be much appreciated.

  Hello David

  I had a similar behavior on my old satellite 1900. At the end I checked the HARD drive and there are lots of bad sectors. At the beginning everything was OK, but after the installation of a few different satellite applications was slower and slower.

  In the end, I switched HDD and everything was OK again. I recommend you to check the HARD drive to see if there are some bad sectors. If so buy new HARD drive. Repair of sector help much.

• HP OfficeJet 4650: HP OfficeJet 4650 does not print web pages: print from Word etc very well. Using Firefox and Windows 7

  HP OfficeJet 4650 does not print web pages: print from Word etc very well.  Using Firefox and Windows 7

  Œuvres of chrome!  Does this mean I have to give up Firefox?

  Thank you!!!

• I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

  I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

  Hi Dee,

  Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

  Good luck!

  Kosh

• When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

  I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

  How much RAM you have on your system? (Right click on "My Computer"-> properties)

  As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

  If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

  HTH,
  JW

• update XP June 29, 2011 caused my pc to start very slowly

  the last update of xp June 29, 2011 has caused my pc start very slowly, what is happening on it takes 3 hours to start

  It is important to know which to update. On July 29, I installed the update of KB2541763 (and had no problem with it). Is this the one you mean? Or is it perhaps one of the pilots or optional updates?

  If the update is at fault, you should be able to remove it through Control Panel Add / Remove programs. Then, you must restart your PC. If it still does not work, you must run the system restore, which dates back to July 28.

  I highly recommend you analyzing your PC from malware, too. MalwareBytes' Anti-Malware would be a good starting point.

• 6500 prints very slowly or failure to print over wireless

  I have the 6500 has more and he rarely printed wireless correctly with multiple laptops.

  Print a line at a time, very slowly, stops with the reported connection loss.  Corrupt characters are printed on the top of the page.  More likely to have problems with the larger print jobs.

  Impeccable with USB.

  Measures taken;

  1) changed its wireless phone system

  (2) changed linksys router Belkin (wireless network is impeccable with performance of broadband for all other devices, btw)

  (3) now use USB without problem

  (4) software up to date.

  (5) wireless report looks very good.

  However, I would like to reuse the wireless.  Please guide me towards a solution.

  Thank you

  Peter

  PS: Device Info:

  Product name HP Officejet 6500 E710n-z product model product CN557A serial number {removed from Privacy} Service ID 22028 Firmware Version CIP1FN1206AR Total Page count 3106 country Canada

  Well, go figure.  Because the printer has been moved, it has worked perfectly!

  Maybe it's a fault ranging/timing as opposed to a question of signal strength?  The intensity of the signal was 3 or 4 before the move.

  In any case, consider printing wireless solved my problems.

  Thanks Rana.  Out of box thinking was a good!

  See you soon,.

  Peter

• PSC 1210: PSC 1210 print very slowly

  Printer prints very, very slowly.
  Self-test page took 96 seconds.
  Test printing to HP PS RD took 05:34.
  I've tried everything recommended on the support site.

  In addition, with the regular docs (Word or PDF) it will print 1st page very well,

  then slow down waaaaay.

  The next page will take more than 10 minutes and out very light.

  I am convinced that it is not a problem of ink that I just replaced both cartridges.

  Thanks for any advice you have.

  The printer made a tape from the printhead, then pause for about 15 seconds before the next swath?  This is probably caused by the failure of one of your cartridges. I don't remember if the PSC 1210 supports printing with a single cartrdige, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• OfficeJet Pro 8600, Windows 7, any type of document with an image prints very slowly

  OfficeJet Pro 8600 Premium.  Windows 7 32 bit, any type of document with an image prints very slowly including .doc. Docx, pdf. Even when printing in draft mode.  Other documents are very well

  Take a look at this link.

• my laptop is very, very slowly. its slow slow start icon

  My laptop crashed and I formatted my hard drive, loaded Windows 7 basic, but because of a different manufacturer, had to download the drivers for my pc on the go again. Since it is very very slow, some icons show and sometimes not at all show without reason. I have an antivirus installed but something is slowing down even start to the top and remains white screen too long. What can I do?

  After that I see your pc specifications, your ram is too small for windows work properly. You need at least 2 GB for your pc. Use Windows 7 Home Edition Premium or the latest version of Windows 7 because Windows 7 Basic can take support only 2 GB of ram. If you don't want to change your windows, I suggest you use Advanced System Care Free. It will search and solve the detected problem. You can go to the official Web page of Iobit for more information.