HP 14-af013au: Windows Boot Manager

Similar Questions

• Windows Boot Manager

  HELP I have a laptop A210 series and I have it turned on this morning to find the following message is displayed:
  Windows Boot Manager.
  Windows could not start. A recent hardware or software change might be the cause. To solve the problems:
  1. Insert your windows disk installation and restart your computer.
  2. choose your language setting, and then click Next
  3. click on repair your computer

  If you do not have the disk, contact your manaufacturer of computer or the system administrator.

  File: \Boot\BCD
  Status: 0xc000014c
  Info: an error occurred trying to read the boot configuration data

  I tried to restart the computer by pressing F8 without result

  I found what I think, it is the "product recovery" disk recovery Windows vista Home premium

  Please help I am a novice in computers but will try my best if you give me guidance. I really don't want to lose what I have on the computer, because it is really important for me

  Thank you

  If you have not some data on the best HARD drive for you is important to install the operating system using supplied recovery disk.
  After doing this you should clean Vista pre-installed and all will be well.

• Pavilion dv6: windows Boot Manager

  Juice I installed a new hard drive and run the Recovery DVD windows system 7, but at the end of installation, I got this message: "Windows cannot find c:\System.sav\Uti\RStone.exe. Make sure you have entered the... and try again after that whenever I turned on the computer I got another screen:

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.

  2. choose your language settings, and then click "Next".

  3. click on "repair your computer".

  If you do not have this disc, contact the administrator of system of youe or computer manufacturer for assistance.

  File: \Boot\BCD

  Status: 0xc000000f

  Info: An error occurred while that to read the boot configuration data.

  Please, any help how to fix this.

  Several times using a Windows 7 installation dvd solves these problems. Until a couple of months, you can download an ISO to make a Windows 7 disc and I often recommemded that as a solution. Unfortunately deleted Microsoft Access to those files unless you have a retail license key. I don't know of any other place to download an iso without danger, so the only solution is to buy Windows 7 If you do not have a friend with a disk to use for the installation which you would activate using license key OEM on the label attached to the bottom of your laptop.

• Re: Satellite P200-1EE - displays an error message in the windows Boot Manager

  I left my laptop alone and down for a few hours and when I'm back on him shows an error message in the windows Boot Manager.
  It says unable to start windows and a recent hardware or software change might be the cause. It asks me to insert my windows installation CD, and if I n t have the CD then to ring for help but unfortunately I really can t find a number at the present time.

  It also reads this:
  File: \BOOT\BCD
  Status 0xc000000f
  Info: an error occurred trying to read the boot configuration data.

  Does anyone know how to deal with this, or this happened to anyone before?

  Hello

  Maybe this article can help http://support.microsoft.com/kb/927391

• Windows Boot Manager: your computer can't get out of hibernation

  Sometimes when I turn on the computer after that he was unable to get out of hibernation, a black screen appears stating that:

  Windows Boot Manager

  Your computer cannot come out of hibernation.

  Status: 0xc0000411

  Info: A fatal error occurred processing to restore data.

  File: \hiberfil.sys

  Any information that was not justified until the computer is entered in hibernatioin will be lost.

  Any information you can provide on how to solve this problem would be greatly appreciated.

  Thank you for your help.

  only @phil_34! => To avoid confusion and duplication of effort, please post all further follow-up replies to your original thread: http://answers.microsoft.com/thread/856d02a2-837c-4e10-ad51-82039bf5c166

• Pavilion 6052ea: 6052ea Dv6 - Windows boot Manager

  Hi guys

  So I tried to do a factory reset on my Dv6, I had replaced the screen (worked) and I wanted to clean during the use of the work.

  I rebooted and pressed F several times then chose a factory reset (Option 3)

  Now, I get to the windows boot manager give me the 3 standard options and file: \Boot\BCD status:------0xc000000f

  I don't have a recovery CD (I thought it would be re - install my original OS)

  I have a flash drive to use, but for some reason any the windows download page does not recognize my CD from the bottom of the laptop key.

  It is faded, but I am sure that it's okay to 99%.

  Any ideas how to solve this problem or is it a bin job?

  Yes it will automatically authenticate Windows 10 machines Windows 8 and there is a manual of key Code for the new version RTM 10240 there for 8 machines Pre-windows.

  https://www.reddit.com/r/Windows10/comments/3dfda8/build_10240_did_you_get_assigned_a_licenseproduct/

  The key shown in the link below is supposed to work with Windows 10 10240, released yesterday and has worked for me with latest Windows 10 Pro Insider with own couple extracts installs. I just downloaded the file .iso 10240 image, he engraved on a DVD and I'm going to install it on my rig here in just a bit. I will present my experience. My apron is a 8 prior to Windows machine. Here is a link to the .iso image file:

  http://Microsoft-news.com/download-Windows-10-RTM-build-10240-ISO/

  You can sign up for the Insider program (instructions on the link above) just to keep all hide them before general release to the public, but MS advice support are all saying this .iso will make a clean installation using this key Code.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• "initialization failed. Windows Boot Manager"is displayed when starting, but no problem boot OS.

  The error 'failed to start. Windows Boot Manager"appears every time when the PC starts, but the operating system still works and everything seems to work very well.

  My system is installed with Windows Server 2008 Standard 32-bit with two 146 GB RAID 1 SAS hard drive and a hard drive of 300 GB in RAID 0.

  Hello Rieze,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2008 and would be better suited to the technet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• Windows Boot Manager failed error

  NB: I have a very short time. her tomorrow. I have a very glitchy w4 Iconia, who has been with us for a day and night, with several screen flickers and this problem I am submitting. Boot Manager Windows failed to start my iconia, which means I can't even swtich it took off. After two other messages come iup which are almost the same, the message: "Default Boot Device missing or startup failed. Insert the recovery media and press a button, then select "Boot Manager" to choose a new device Boot or Boot Recovery Media. "The two Previos are"1. Windows Boot Manager start failed. "and"failed to initialize the Windows Boot Manager. "I'm experienced in it so I know that something has gone wrong with the boot process, so nothing else running this error start freaking program other some other starnge treats that i have no knowledge of. the next screen that is displayed after the third popup says

  Menu Option to start 1. Manager start Windows ESC to exit

  Bluetooth doesn't seem to be running so im stuck with by clicking on windows boot manager which throws me through this lopp everywhere again. Ive plugged my tablet on my computer but it doent seem to be recognized as a disconnected device.ive it in fear of this charge as the race to the bottom of the stack seemed work very well on my mini ipad when it gopt stuck in a screen.i gel do not think the iconia will start correctly after he sinks since I don't have any medium of recovery and I have a deadline. that is tomorrow morning. knowing that the iconia has a max of 9 hours batterylife, I'm sure the battery rundown will work. Please advice cocoralie knowledge. If you are bored to my typos, please llok in my entry in the welcome forums.

  Hurtling down the battery seems to have solved the problem! Works great! No I don't think that there is a malicious, just stuff software in the code.

• Constant beeps sound then Windows Boot Manager

  I have a HP Pavilion dv6-1107 X series of portable entertainment. When I turn it on I almost always get a series of very strong short beeps into 3 groups inconsisent. First group can be 4 to 6 beeps. Second group can have 1 or 2. Third group just going until the Windows Boot Manager appears.  Once I select the Vista operating system everything seems to start to work as usual.

  Here's what I did:

  1. replace the card motherboard and CPU

  2 checked and tested the hard drive diagnostic and in another machine - OK

  3. have you used a good hard drive in this machine - the same symptoms, no change.

  4 RAM stick checked and tested in both slots and diagnostic test on another machine - good

  5. have you a recovery of the default settings - operating system (OS) have behaved erratically.

  6 do you have a clean installation using another machine - OS works but same symptoms as above with the beeps and Windows Boot Manager.

  7 installed all required drivers as required in the Device Manager (after a LOT of problems trying to find the driver of HP download support - I had to search for HP Compaq Pavilion dv6-1107AX find a site linking driver downloads).

  8. have you run AVG anti virus and anti-spyware (Malwarebytes, Spybot and SuperAntiSpyware) 3 x. Bugs nothingness based.

  9 reset the BIOS by default.

  Am also having problems anytime access BIOS. It takes several attempts, but can be obtained by pressing F10 immediately after the first screen with ESC on that option.  Also have problems Access Mode safe mode using F8 but perseverance is necessary and it will eventually work.

  Other ideas anyone please?  Fear that I ran out of them.

  Hoping, hoping, hoping...

  Russ

  As it happens, last night I stripped the laptop (still) bare bones that is

  * motherboard with 1 stick of RAM and hard disk, CPU, x

  * switch cover (market button and LEDs connected to motherboared,)

  * external connected monitor.

  I had done this before and the unit pulled up OK.  I wasn't hunting question do beep at this time.

  This time I also connected the Assembly Speaker and connected to the motherboard as well.  And that's it-no beeps.

  Re-assembled the laptop but this time to the left of the keyboard off the coast and pulled upwards. No beeps.

  Replace the keyboard on - got beeps loudly.

  Check all the keys. Each of them is spring loaded and seems to work very well. Clean the keys and hooked it to the top, but no change.

  It seems that the problem has been a key stuck inside the whole keyboard and I'll have to get another. Ordered a replacement last night and will have to see how it goes, but I'm pretty confident.

  The only question is now that the screen is in a particular color with a light blue in the Center and black around the edges. It is not a clear distinction but blurred between the two colors. Never seen that before.

  Thanks for your reply.

  Russ

• HP Pavilion dv7 Notebook PC - Windows Boot Manager does not allow me to restart the laptop

  HP Pavilion dv7 Notebook PC
  XH121UA #ABA
  Office home and Student 2007

  I turned on my laptop and got the following message is displayed:
  Windows Boot Manager
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.

  I had no problem before now with the computer. Yet once, this message has occurred during a turn on my laptop. I tried to restart the laptop, but it is not allowing me to restart. The laptop back to this message.

  I appreciate any help with this issue. I thank very you much for your time and knowledge.

  Hello

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• Can I enable disable the Windows Boot Manager?

  My Vista Home Premium 64 has a great deal for a year.  Now, at the start, I get "Windows Boot Manager" (a scary BACK-looking screen) which delays the start-up for 30 seconds, and everything seems to work MUCH more slowly.  I think the problem started when I installed Norton Ghost 14.  Can I disable this thing WBM somehow and have always Windows Vista starts successfully?  How?

  The change occurred because of an option in Ghost. Ghost may have given you an option to create a recovery partition and you took it. Consult the manual of Ghost or its options or contact Symantec technical support. MS - MVP - Elephant Boy computers - don't panic!

• When the computer is turned on, it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c.

  Original title: 0x000014c File: \Boot\BCD

  I have a Dell Latitude E5400 running Vista Basic. Just replaced disc and ran all the diagnosis is good. When I turn on it goes into the Windows Boot Manager and it says File\Boot\BCD status: 0x00001c Info: an error occurred trying to read the boot configuration data. After I ran the diagnostics, he said that all tests passed but and if I wanted to continue with more, I said no and we say "Error" "SYSTEM_ERROR this system is not recognized as a Dell PC support. These diagnostics cannot be run on unsupported systems. "Then there's an OK box. How can I possibly fix. It is laptop of my child and I would like to fix it for him for the school. I have restore Dell custom factory integration CD that came with his laptop. It is said that "it is the Dell CD of CFI restore disc. I really don't want to ruin it. I don't want to run this disk and then was not the driver for it and she will not be able to surf the net or something like that. If anyone has an idea please let me know. Thank you!

  Hi Maddy,

  This problem may occur if the Windows startup files are damaged or missing.

  If your computer has integrated system recovery options, you can try to perform the Startup Repair and check if it helps.

  If it fails, you must have a Windows Vista installation disc and try to parade Startup Repair boot from the disc.

  If the problem persists, try the steps in the article to rebuild BCD, boot from the installation disc.

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Because you replaced the hard drive, you can also get in contact with the Dell helpdesk for assistance.

  Hope the helps of information.

• Windows Boot Manager error. Status: 0xc00000F

  OK so I turned on my laptop today and I get this error

  Windows Boot Manager
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance
  File: \Boot\BCD
  Status: 0xc00000F
  Info: An error occurred trying to read the boot configuration data
  Here is an image I found on Google that is exactly the same as what I see except the thing upstairs server IP
  http://i44.Tinypic.com/73pkpy.jpg
  What I think happened. When I start the laptop, she had a game called Roller Coaster Tycoon inside.
  I don't have the boot CD.
  IM this ad on another computer.
  Thank you

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/308041

  It will be useful.

• HP h8-1022: inputs multiple Windows Boot Manager.

  I have multiple instances of the Windows boot manager listed in chapter Sources of UEFI boot when I press ESC and F9 to list the devices to boot.

  

  I just cloned my original 2 TB drive on a 480 GB SSD with a lot of issues now resolved. The computer starts very well now, but these only entered multiple occurred when I had two disks connected each with their SYSTEM partition intact. (After all, it's a clone)

  When I look at things with EasyBCD I get this:

  

  So I can't remove redundant entries here. I'm puzzled!

  Can someone tell me how to remove the extra entries in the Windows Boot Manager?

  Hello

  What you see might be the result of the number of active devices UEFI (all sources) on your PC.  Windows 7 not a UEFI system.

  On my PC, active residual Windows to UEFI devices previously installed boot manager entries can be removed by resetting the default BIOS entries.

• Remove Windows installing on the Windows Boot Manager

  Title: two Windows Vistas on my PC

  I installed windows vista on my pc, but it wasn't working properly, so I installed it again.  When my computer starts it now goes to windows Boot Manager where there are two window vista operating systems.  The first is OS (C) data D, and the second is OS (D) data C.  First of all, why my computer goes to the window instead of going directly boot manager in windows vista.  Second, how remove the windows version of vista that I do not want to and get the one I want to get into Windows vista without using the Boot Manager?

  Hi BertieBarfield,

  To remove an entry in the Windows Vista Boot Configuration, the simplest method is to use msconfig.

  To start msconfig:

  (a) click Start

  (b) in the search text box, type msconfig

  (c) launch msconfig by selecting it in the results of search above the search text box.

  After that the system configuration is launched:

  (d) go to the Startup tab

  (e) select the boot entry to remove.

  (f) click the button Delete and then click OK.

  Note: Be sure to be connected to the Windows Vista partition, you want to keep when you perform these steps if you do not remove the good installation by mistake, this will cause data loss.