HP 15 ac-120tx: chipset Wifi not detected after fresh install windows 8.1

After a new installation of Windows 8.1 it does not detect the wifi chipset. Registration in the other devices category in Device Manager is network controller. Tried to install this driver: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73310.exe but does not also because it still does not recognize the wifi. LAN Ethernet is only show in network adapters.

The network controller PNP device ID is:

PCI\VEN_10EC & DEV_B723 & SUBSYS_804C103C & REV_00\4 & 1E830894 & 0 & 00E5

Need help please?

Hello:

Looking for the hardware revision of the wireless card that your laptop is a newer version of the driver than 2014.

This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

File name: sp72932.exe

Your laptop is not supported by HP for W8.1.

However, you should be able to use the W8.1 drivers and software ac000-15 t on your model, except the BIOS and firmware files.

http://support.HP.com/us-en/drivers/selfservice/HP-15-ac000-notebook-PC-series/7771404/model/8381866

Tags: Notebooks

Similar Questions

  • Second monitor is not detected after upgrade to Windows 10

    After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

    I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

  • Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

    I tried that at this link:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

    In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

    1 reset
    2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
    3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
    4 run the difficulty from here: http://support.microsoft.com/kb/971058
    5 reset
    6 try Windows Update
    7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

    I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

    I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

    According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

    So, here is my new thread! :)

    I am running XP Pro 2002 SP3 and IE8

    Please help me with this problem.

    Thank you

    Kris

    2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

    If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

    Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

    Did reboot you after you run the Update Agent Installer?

    Dump you all your IE8 temporary Internet files and cookies?

  • WiFi not detected after installing Windows 7 Ultimate 64 - bit Elitebook 8740w

    Hello

    I used a DVD to install Windows 7 Ultimate 64 - bit to replace Windows 7 Professional 64 - bit on my Elitebook 8740w. In the end, I used a new facility as the upgrade option ended with a failure error. However, after the clean installation, it cannot detect any wifi. What drivers I am likely to need download and re - install?

    Thank you, in advance.

    Kenwin

    Hi, Kenwin:

    Here is the link to the wireless card driver you need:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4137878&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108502_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • Wireless device not detected after upgrade of windows 8

    I upgraded my HP Pavilion dv6338se notebook PC for windows 7 to windows 8.  Now the wireless device is not detected when I check the settings.  Device Manager showed a coprocessor that didn't have a driver, I downloaded a driver NVIDIA GeForce Go 6150 and the coprocessor error is now gone.  I also updated the BIOS with the latest driver from HP.  Still no joy with the wireless.  Any suggestions/help would be greatly appreciated.

    Hello

    It seems that windows is unable to find the drivers for the Wifi card and the HP pavilion dv6338 model can not have updated drivers for Windows 8 on the HP website.

    I'd still be recommendyou to check with the help of HP if they have updated drivers for the model you mentioned.
     
    HP Pavilion dv6338se PC drivers
    Contact HP consumer support
     
    Hope the helps of information.
  • CD/DVD NOT DETECTED AFTER UPGRADE TO WINDOWS 10 DRIVE

    This morning (July 30), I've updated by computer for the operating system Windows 10.  Since then, however, my CD/DVD drive is not detected or recognized.

    The icon on my desktop has a big question mark on it.  If I click who, I get the following error message:

    The element 'E:\. ' that this shortcut refers to has been chnaged or moved, and this shortcut no longer works correctly.

    I looked in the Device Manager for the CD/DVD player, and there is nothing there.

    What happened and how to fix it?

    I had the same problem. It worked to fix my Windows 10 Pro system. Note This mentions 32 bits, but it worked for my Windows 64-bit 10. This was taken from http://support.hp.com/us-en/document/c03280768

    Resolution 5: Create a registry subkey
    Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go to http://support.microsoft.com/gp/admin
    Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
    To create the registry subkey, follow these steps:
    Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
    Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
    In the navigation pane, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    Right-click atapi, point to new, and then click key.
    Type Controller0 and press ENTER.
    Right-click Controller0, point to new, and then click DWORD(32-bit) value.
    Type EnumDevice1 and press ENTER.
    Right-click EnumDevice1, click on change...
    Type 1 in the value data box, and then click OK.
    Exit Registry Editor.

  • Qosmio G10-133 - battery not detected after upgrading to Windows 7

    Hello, I hope someone can help my frustrations here.

    In recent weeks, I successfully upgraded my laptop to Windows 7, an increase of memory to 2 GB, bought new power cord for laptop, new battery and resolved all the issues that Windows 7 has cast on me. The laptop and runs like one dream other than a question that seems to have had worse.

    The laptop no longer recognizes the new battery. (battery with a cross through it and a photo of current) For about a week after installing the battery, this has worked fine but now does not detect everything. I don't have any errors in Device Manager and windows recognized the ACPI etc battery inputs and has no problem. I also loaded the package of Toshiba value added that Windows 7 has found for me but still nothing. Battery not charge even though sometimes the battery works for about 30 seconds to start up if the battery is back removed and implemented, then stops again (once Windows loaded) I tried many things like the disabling of the driver, reinstall battery etc, but nothing. I tried the iniitally of battery with Windows XP and worked well.

    I have also searched the web and saw that many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS, but Toshiba have not released an upgrade from the original in 2004 (which is for WIn XP Media Center), and there is no settings in my BIOS for ACPI etc.

    In addition, I can not calibrate the battery because I can't do anything with it. I don't think it's a question though.

    If anyone has any ideas I would really appreciate it or all the links to the drivers etc.

    If this is sorted my laptop should last for 5 years!

    Thanks for reading this.

    Dickie

    Hello

    First of all, I doubt that many other laptops equipped with Windows 7 have this problem. I've never heard of this and normally charge the battery will not be controlled of the OS. It happens automatically and your battery will be charged if the AC/DC is plugged. If the OS doesn't affect it!

    To be honest, I also don t know why your battery isn't detected, but what happens if you turn off the laptop and let the AC/DC adapter plugged in for 24 hours? After that, it should be possible to work on the minute of the battery for 1 hour or more.

    If this isn't the case, it seems to be a hardware problem, maybe the battery doesn t work correctly and should be replaced. You should contact the retailer where you bought

    By the way: some nice and interesting tips on battery:
    http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

  • N5110 wireless DOES NOT WORK AFTER RE INSTALL WINDOWS 7, I NEED THE DRIVER without THREAD SPECIFIC please

    Hello

    My problem started when I re installed windows 7 Ultimate and everything worked perfectly including wireless internet connection

    Only free Wifi does not, I tried to download almost all of the drivers in the support page for the model my and still not identified, I even called customer service and they sent me the link to the pilot specific and still does not.

    Please help, any solution...

    THX in advance :)

    Good guys and finally I did it.

    I will talk about my missing driver, either (on the inside of the Device Manager) (NETWORK CONTROLLER), I just pressed on right click then properties, then you choose details... instead of the description of the device open and choose the lds material then simply copy the 2nd driver name and google it online, you will find free download from many sites thro web... I just did this and simply the wifi works perfectly now.

    :)

  • XPS L521X - camera not detected after upgrade of Windows 8

    Hello

    I just upgraded to Windows 8, and now my camera does not work with Skype or anything. When I open camera in Windows 8, it says that there is a problem with my camera. Any ideas?


  • It does not start after you install windows 7 on an SSD without going into the bios and clicking on the reader.

    Will change the bios fix it?  If yes how?

    CharlesR salvation,

    This concern is usually caused by an incorrect configuration of the BIOS of your device settings. If you have recently installed Windows 7, then most likely the boot priority is always set to the optical drive or USB (depending on which you have used in the installation of Windows 7).

    The BIOS settings are dependent on the manufacturer of your device, this is why we invite you to contact the manufacturer of your device for assistance by changing its settings.

    Kind regards

    BIA of Hamilton

    You can use the mark as answer button, if this post responds to your request.

  • B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

    AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

    I installed the driver below and my problem has been fixed.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

    I hope this helps someone else?

    Mod edit: System model added to the front of the subject line to improve visibility / clarity

    Thank you for the help with the Forum. I find the help I need with my new Lenovo.

  • DVD rom not detected in the Bios & windows

    Mr President, in my computer the dvd rom is not detected in the Bios & windows. Send me a PSE with solution please.

    Hello

    1. which version of the windows operating system is installed in the computer?

    2. What is the brand and model of the computer?

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756

    (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    I also suggest you to connect with the computer manufacturing and update drivers for BIOS.

  • Apple Software Update will NOT work after upgrading to Windows 7

    Apple Software Update will NOT work after upgrading to Windows 7

    flyboy340 wrote:

    Apple Software Update will NOT work after upgrading to Windows 7

    More information is needed.

    Which machine you use, OS X are you running?

    Windows 7 running in BootCamp?

    The OS X app store is not present at all?

    AppStore is present but the update tab does not?

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

Maybe you are looking for

  • The shortcut key to highlight delete fails. What should do?

    I used to be able to use the SHIFT key, more among the arrow keys for h.ighlight text before deleting. This unresponsive.If I use the scroll bar ke.ypad more by sweeping on the keyboard (I use a .laptop like your desktop) will remove, but I find myse

  • Recovery DVDs

    I buy hp envy 15-j110tx, which comes with original windows 8.1, but somehow it has formatted with recovery drive. Now what I'm doing. someone told me that hp will provide me recovery disk in this case, but how I ask this.or no other chance of getting

  • HP Deskjet 1055 printer: my printer does not print.

    My printer is about 3 years old and I am trying to install on the new laptop.  I thought that I installed it but when I try to print I get a message to install the printer.  When I went to the "scan and print doctor" I got a message saying there is a

  • Error during the download of Windows Live essential: 0 x 80190197

    can someone tell me what is the reason for this error? What is the meaning of this error code? My OS is Windows with Service Pack 3, always up to date, I assume. Thank you m.. Peter of the Italy.

  • 0Xc946001E error code

    I get the 0Xc946001E error code when I try to add a .mov Quick Time Movie Maker file.  What can I do to import video?