HP 15 ac101tu: after the failure of the display driver update, cannot open my laptop

Similar Questions

• After the reinstallation of 9 cannot open the links included in my e-mails.

  I contact your support staff of Microsoft, but since I can not open the thread, I can't keep going.

  I had trouble with IE9 for about 16-18 months. Geek Squad has spent months trying to figure what was wrong with my computer, and they said many of their clients have the same problem. I was told to choose either Google or Firefox. I use Firefox for a few months, but I find that it is unstable.

  My brother came home and rebuilt my computer. I have a new hard drive, video card, my processor Intel 7 handles documents and a new 250 Samsung SSD manages operating system, more he doubled the memory. I've been complaining about the Firefox, so he suggested since I was practically a set of new systems, reinstall IE9 I've done. Now, the problem is opening links in e-mail messages.

  The error I get, it's something like 'operation cancelled due to new restrictions see your administrator'

  I have no idea what has been changed. I am the administrator of my computer, but that did not help.

  You don't mention what program you use for mail. By chance, it would be MS Outlook?

  You receive an error message when you click a hyperlink in Outlook
  http://support.Microsoft.com/kb/310049

  This operation has been cancelled due to restrictions in
  http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions

  Microsoft Office Outlook Forums can be found here
  http://answers.Microsoft.com/en-us/Office/Forum/Outlook?tab=all

• Satellite M60 and the display driver installation

  Help people to the display driver "installation cannot continue because the size of the specified directory path and the name of the installation folder exceeds 88 characters.
  Shorten one or both of the limit specified below and try again"! that to me?

  Hello!

  This looks like your username to long and the path of files extracted more than 88 characters.
  I think you should change your username or try with another account to update the driver, for example the admin account.

  If it doesn't work try to download the driver again.

  I hope this works, but you can give us feedback, what's going on.

  Good bye

• After the last Windows Update (04/27/11), my home group no longer works

  Original title: homegroup after Windows Update failure

  After the last Windows Update (04/27/11), my homegroup is no longer in effect.  That's happened?

  I have Windows 7 Professional Version 6.1 Build7601: Service Pack 1 on both machines.

  The resolution of the problems of the residential group has done several things, but that did not help.

  What works removed one of the machines on the network for several hours and then reconnect to the network.  Don't know why?

• Why attached used pps files opened after the latest Automatic update of the ie8?

  Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
  attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
  When I try to open files pps attached, this is what I get.
  a box with a red x will appear and this is the message;
  "this file has no program associated with it for performing this action.
  Create an association in the FOLDER OPTIONS Control Panel."
   
  Before the automatic update, this function worked fine.
  Also, the association for pps files is still there in the Folder Options Control Panel.
  and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
  .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
  .. just one more why people hate automatic updates or updates of any kind.
  like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
  So what's the cure for this annoying problem?
  E-mail address is removed from the privacy *.

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  I also tried renaming it as shown below, and it will not let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the two latest updates (currently on 30.0) I get characters corrupt in the (awesome) address bar.

  After the two latest updates (currently on 30.0) I get characters corrupt in the (awesome) address bar. This seems to happen randomly according to the current URL. When the problem exists, I can't read anything in the URL bar. I have a screenshot of the problem.

  This problem may be caused by the extension of 1.0.6 RSS icon which displays in the list of system details.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Satellite 100-192: questions after the recent MS update...

  Satellite 100-192.

  After the recent MS update I had the problem with the Realtek sound card driver. I solved it by applying the hotfix provided MS.

  Now the problem is that the disk cleanup utility does not launch. Anyone any idea?

  I just found out that my disk cleanup utility would not work due to a free program called Photo Toolkit. Although it is a nice little program for quickly editing photos, apparently it causes such problems when it is loaded.

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?

• HP ENVY 360 M6: Wfii adapter on new 360 M6 desire becomes invalid after the last critical update.

  The wireless adapter on my new laptop becomes invalid after the last critical update. Reboot / restart, diagnosis or troubleshoot cannot fix or repair. I was forced to do a restore to the date preceding the update. Adapter Ok now? This is a problem on other models?

  Hello

  Try this first

  Download and install the latest driver of wireless LAN adapter can solve common problems with wireless Internet. Follow these steps to use the Device Manager to find the latest WLAN driver:

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Failed to start Windows after the installation of updates

  HI, I currently use windows 7 32-bit and have been almost half a year now, nothing was wrong with it until just recently when I installed updates for windows and it goes across restart process. Whenever it restarts after the installation of updates it now in windows could not start and is system launch of repairs etc, when it finishes I cliquerai on end to end and then he launched startup correctly, also, I realize account updates, I have install are successful, when I connect (from the option view update history) , but I get suggestions of exact same update again just after the installation of the updates mentioned only, hope, it is specific help enough, would be much appreciated

  Can you provide the names, the updates that have been installed?

  see this article for when you are offered the same update again and again:
  http://support.Microsoft.com/kb/910339

• All the data disappeared after the installation of updates! Help!

  Hoping someone can help with this
  Last night I installed updates KB961371, 973346 KB and KB 890830 for Vista Home Premium and they seemed to have been settled... my computer turns off fine. But when I started today and connected to my usual user, I got a pop-up message from the tool bar by saying "your user profile was not loaded correctly, you have been logged on with a temporary profile, cnanges do you will be lost when you log out." Check the log of the events for more information or contact your administrator." I then found that all my data was away from all my files (music, photos, Documents, analyses)... everything was gone. I then logged out of my user every day and in my admin to have a snoop around and all the data disappeared from there too. While in admin I also looked in the update section to see if the updates have not been installed correctly, but he said that they had been installed successfully.

  I then rebooted, as I thought that it might help, but everything remained the same.

  After the reboot, I clicked through 'my computer' and hard the news here on the disc wrote I have 89 GB of 147 GB free, which I think is consistent with the amount of data I have stored. This made me think that the data is always there somewhere, but I can't access it at all thanks to my user every day or my administrator.

  As far as I can see, all the programs that I installed myself (such as Skype, open office software for my printer hp) are all present, but some of the shortcuts are out of the office. Also, when opening, they "behave" as newly installed programs. for example: Open Office writer guide me through a license agreement and registration rather than simply open a new document, and also firefox behaved in a way similar "new". Also, on commissioning today (after the installation of update yesterday), the window "welcome center" popped up, as did a window asking to save the "synaptics pointing device.

  In short, the system "behaves like new", remembers none of my settings etc, but it is still a my programs installed and most of all, I can't access any of my data! I have a Toshiba Equium P200-178 (use vista Home premium service pack 1 32-bit), I use AVG anti virus (8.5) and Ad-aware software anti spyware. These are updated every day and I run scans on a regular basis (last analysis aware ad probably about a week ago) so I'm not sure it's associated virus.

  Ask yourself what is this "temporary profile" and how to return to my old and my data! Help, please! Thanks :)

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  Good luck with it.

  Mick Murphy - Microsoft partner

• Why attached used pps files opened after the latest Automatic update of the ie8? I have XP SP2 and 7 PPViewer

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  also I tried to rename it as shown below, and it won't let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files (Microsoft's PowerPoint slideshow) PPS

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  After the change of show to open, close the Registry Editor window.
  For. PPT (Microsoft PowerPoint's presentation) files

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  After the change of show to open, close the Registry Editor window.

  For more information, please click on the following link:

  http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

  For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

  I hope this helps. Let us know if you need help.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files (Microsoft's PowerPoint slideshow) PPS

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  After the change of show to open, close the Registry Editor window.
  For. PPT (Microsoft PowerPoint's presentation) files

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  After the change of show to open, close the Registry Editor window.

  For more information, please click on the following link:

  http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

  For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

  I hope this helps. Let us know if you need help.

  --------------------------------------------------------------------------------
  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hello

  This forum is for Windows Vista updated Threads. Please post here:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.windowsupdate&lang=en&CR=us

  Thank you for your visit,

  Rick

• my laptop keeps restarting after the installation of updates

  my laptop is stuck at step 3 of 3 (only display 0% complete) after the reboot for updates, then restart again and again, with the same supposed progress, I ve let it doesn't restart on 7 times.still no good.

  Tell me what are the steps to solve this problem

  Hi Amrbialy,
  When your computer is turned on, push and hold down F8, this will bring an option before it starts on your desktop. Choose "last known good configuration".
  If this has no effect. Then do the same thing, except choose Safe Mode. When it boots to desktop click Start > all programs > Accessories > system tools > system restore.

  Then it will give you an option to choose a date to return. Choose a date before you install updates, and then click OK. Restart your computer.

  It will be useful.
  Let us know how it goes!

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think